CURRICULUM VITAE

Sayed Ahmed NagyPersonal Data Date of Birth : 2/5/1971 Nationality : Egyptian Languages : Arabic (mother-tongue) , English (Work & Education) Profession : - Associate Professor of Electrical Power & Machines Engineering.

- (Former) MEP Consultant ACE Consulting Engineers (Moharam – Bakhoum)..

Address : Iskan 3, Military Hospital, Khamis Mushyt, KSA Phone : +966 544 015 644 , +966 55 348 37 72 E-mail : sayed.nagy@gmail.com

Executive Synopsis Highly accomplished professional with over 20 years of multifaceted experience in High Education

(post and undergraduate study), as well as professional experiences in MEP Consultation Engineering. Profound experience to maintain high quality standards to meet challenges of this fast paced, high turn-

over industry; Multitasking ability to sketch the plan, prioritize the work and manage the complex projects under aggressive timelines

Adroit at working effectively with a wide range of people in highly demanding situations; Persuasive communicator with well-developed business analytical skills

A good team player and coordinator, with an ability to lead a team by example and motivate them to achieve desired objectives.

Excellent communication, negotiation, and presentation skills Adept at working in high pressure environments with strict deadlines Ability to build new territories and expand opportunities towards the achievement of stated targets, to

lead, motivate and provide effective guidance to a team of professional and support staff

Education 2002 - 2006

Ph.D., Electrical Engineering, Al-Azhar University, Egypt.TITLE “Design and Improvement of Metering Scheme in Power System State Estimation via

Genetic Algorithm”.

1995 - 2002 M.Sc., Electrical Engineering, Al-Azhar University, Egypt.TITLE “Bad Data Detection, Identification and Correction in Power System State Estimation”.

1989 - 1994

1

B.Sc., Electrical Engineering, Al-Azhar University, Egypt.Grade : Excellent with Honor Degree.Project degree : Excellent.

Instructor of Short Training Courses (2004 – present)1. Power System Protection and Control (ACAD- Cairo, Egypt)2. Protective Relays Principles & Application (INTEX – Cairo, Egypt)3. Circuit Breakers & Switchgears Operation and maintenance (ETCO- Cairo, Egypt)4. Circuit Breakers Operation and maintenance (MSTC – Madina, KSA)5. Circuit Breaker Schematic Diagrams & Troubleshooting (MSTC – Al-Jubail, KSA)6. Maintenance of Electrical Power Substation. (ACAD – Cairo, Egypt)7. Protection of Electrical Systems (SCA – Cairo, Egypt)8. Application & Testing of Hv& LV switchgears (ASC- Cairo, Egypt)9. Electrical Equipment Testing and Maintenance (ETCO- Cairo, Egypt)10. Power System Grounding (ASC - Cairo, Egypt)11. Operation and Maintenance of Electrical Networks (ETCO – Cairo, Egypt)12. Electrical Installation (KAFAAT- Cairo, Egypt)13. Electrical Distribution Networks, Design, and Maintenance (INTEX – Cairo, Egypt)14. Troubleshooting Faults in Electrical Installations(INTEX- Cairo, Egypt)15. Preventive & Predictive Maintenance of Overhead Lines (INTEX –Cairo, Egypt)16. Power Transformers. (ACTrain- Al-Khubar, KSA)17. Transformer Testing and Maintenance. (INTEX - Cairo, Egypt)18. Transformer Testing and Maintenance. (INTEX –Al-Jubail, KSA)19. Transformer Theory, Operation and Maintenance (INTEX- Al-Jubail, KSA)20. Electrical Safety of High Voltage Equipment (ICMD- Buraidah, KSA)21. Electrical Switchgear for Engineers (SCA- Kuala Lumpur, Malaysia)22. Safety Practice in Handling and Installing Electrical Networks (INTEX – Cairo, Egypt)23. Electrical Safety (ASC – Cairo, Egypt)24. Measurements & Measuring Instruments. (INTEX – Cairo, Egypt)25. Advanced Control Systems. (ACTrain- Abha, KSA)26. Sensors (INTEX – Cairo, Egypt)27. Calibration Control System (ASC- Kuala Lumpur – Malaysia)28. Control systems and control process. (Applied Training center – Abha, KSA)29. Statistical Process control –SPC – (ACTrain- AL-Khubar)30. Calibration Of Valve Gauges And Switches (ETCO – Cairo, Egypt)31. Measurements Process Methodology and Calibration (INTEX- Al-Dhahran, Saudi Arabia)32. Maintenance of Electrical and Electronic Measuring Instruments (INTEX – Cairo, Egypt).33. Calibration of Electrical and Electronic Measuring Instruments (INTEX- Cairo and Al-Jubail).34. Instrumentation and Process Control Systems (ETCO – Cairo, Egypt)35. Fundamental of Electrical and Electronic Measurements (INTEX – Cairo, Egypt)36. Process Control Techniques (ISCOSA- Dammam, KSA).

2

37. PLC Step7 (ISCOSA- Dammam, KSA)38. Process Control Instrumentation Level 1 (ISCOSA- Yanbu, KSA).39. Instrumentation Measurement & Control (ICMD- AL-Jubail, KSA)40. Fault Tree Analysis(SCA- Kuala Lumpur, Malaysia)41. Others …..

Awarded Courses and Certificates1. Training of Trainers Diploma (TOT), Canadian Training Center of Human Development - CTCHD2. Leadership Skills (Canadian Training Center of Human Development - CTCHD)3. Personal Styles (Canadian Training Center of Human Development - CTCHD)4. Effective Communication Skills (ETCO)5. Strategic Planning (ETCO)6. Quality Management System ISO 9001, Internal Auditor

ACADEMIC PROFESSIONAL EXPERIENCE Associate Professor:(June 2012- present), Faculty of Engineering, Al-Azhar Univ.

Assistant Professor:(June 2007- June 2012), Faculty of Engineering, Al-Azhar Univ. Instructor of several Electrical Engineering undergraduate and graduate courses. Supervisor of undergraduate and graduate research assistants and several teaching assistants.

Lecturer : (Nov. 2002 – June2007), Faculty of Engineering, Al-Azhar UniversityTeaching courses: Power Systems Analysis – Electrical Power Engineering – Energy Conversion and its Economics – Electrical Distribution Networks – System Analysis and Automatic Control – Advanced Mathematics – Electrical and Electronic Measurements – Numerical Analysis – Advanced Calculus – Engineering Mathematics – Statistics – Electric Circuits.

Teaching Assistant : (May 1995–Nov.2002), Faculty of Engineering, Al-Azhar Univ.Served as teaching assistant in courses: Mechanics – Mathematics – Statistics – Power Systems – Advanced Mathematics –Power Transformer - System Analysis and Control.

Provided help outside classroom to students, advised students on homework, graded all assignments, substituted professors in lectures, conducted laboratory experiments and laboratory demonstrations

Courses, Instructed for Undergraduate Students.i. Power Systems Analysis (I, II and III).

ii. Energy Conversion and its Economics.

iii. Electrical Distribution Networks.

iv. Electrical Systems in Buildings.

v. Switchgear and Protection Engineering

vi. Systems Analysis and Automatic Control.

vii. PLC and Sensors

viii. Electrical Power Engineering.

ix. Digital Control Systems.

x. Electrical and Electronic Measurements.3

xi. Electric Circuits.

xii. Electrical Laboratory.

xiii. Electronics (Basic).

xiv. Advanced Mathematics.

xv. Numerical Analysis and programing.

xvi. Statistics.

xvii. Engineering Mathematics (I, II).

xviii. Engineering Mechanics.

Courses, Instructed for Postgraduate Students.i. Power System Protection.

ii. P.S. State Estimation, Advanced course.

iii. Applications of Expert Systems in P.S.

iv. Renewable Energy.

Vocational Teaching (2010 – 2012).Instructed in two vocational institutes (Electrical Installation Institute and Electrical Maintenance Institute).

i. Electrical Installation in Buildings.

ii. Calibration and Maintenance of Electrical Equipment

iii. Graduation Projects

Supervision of Theses and Dissertations:M.Sc. SupervisionIn addition to 7 current Master degree candidates, Sayed has supervised the awarded followings M.Sc.s:

1. Abdullah El-Sawalhy, “Power Quality Assessment in Distribution Networks” (2015)2. Magdy Khaled, “Mathematical model of the Fault Diagnosis in Power Transformer” (2015)3. Mohamed Salah, “Study of Dynamic Performance of Load Frequency Control in Interconnected

Power System via parallel ac/dc transmission links and a Deregulated Environment” (2014)4. Ahmed Hussien Abdallah, “Power System of Load Frequency Control Based on Fuzzy Logic

Control”. (2013)5. Mahmoud Abdellah, “Reliability of Power Systems” (2013)6. Mahmoud A. El-Dabah, “Topology Errors Identification in Electrical Power Networks” (2012)7. Ahmed S. Adail, “Network reconfiguration for loss reduction in electrical distribution system using

Genetic algorithm”.(2012)8. Mohamed Y. Henna, “Enhancement Electrical Aspects of Cogeneration Distributed System Using

Superconducting Magnetic Energy Storage (SMES) unit” (2011)

Ph.D. Supervision In addition to 3 current Doctor of Philosophy degree candidates, Sayed has supervised the following

PhDs:

1. M. Y. Henna, ”Prevent cascaded event of distance relay zone three by using logic control circuits" (2015)

2. Ahmed S. Adail, “Robust State Estimation in Power System; A new Approach”.(2015)

4

3. Ahmed Mahfouz Abdelfattah, “Network Parameter Error Identification Using Synchronized Phasor Measurements” (2014)

4. Amr Suliman , “Voltage Stability Assessment of Power Systems” (2013)5. Ahmed Agwa, “Using Wind Energy and Fuel Cells to Construct an Autonomous Energy System”

(2012)6. Ahmed Fahmy Bendary, “Reactive Power control in Distribution System Using Genetic

Algorithm” (2011)

Publications1. H. S. Ramadan, A. F. Bendary and S. A. Nagy, “Particle swarm optimization algorithm for

capacitor allocation problem in distribution systems with wind turbine generators”, International Journal of Electrical Power & Energy Systems, Volume 84, Pages 143–152, January 2017.

2. H. S. Mohamed, S. A. Nagy, S. K. EL-Sayed, “Development of EMCS In Power Plants”, Journal of Multidisciplinary Engineering Science and Technology – JMEST, Volume. 2, Issue 10, October, 2015

3. M. Y. E. Henna, S. A. Nagy, A. F. M. Bendary, Hasan M. Moustafa, “Power Quality Enhancement for Smart Distribution System Using Superconducting Magnetic Energy Storage Unit”, Coimbatore Institute of Information Technology (CiiT), Volume 7, Number 9, 2015.

4. M. Y. E. Henna, S. A. Nagy, A. F. M. Bendary, “Using Logic Controls in Cascaded Events Prevention for Pilot Distance Relay Zone Three”, Coimbatore Institute of Information Technology (CiiT), Volume 7, Number 6, 2015.

5. A. El-Sawalhy, E. A. Badran, and S. A. Nagy, "Mitigation of Harmonic Distortion in Industrial Distribution System with VFD and PFC", The 16thInternational Middle East Power Systems Conference (MEPCON'14), 2014.

6. S. A. Nagy, Y. Rihan, I. S. Ibrahim, A. S. Adail “Observability Analysis and multi Bad Data processing Using Phasor Measurements Units in Power System State Estimation”, Journal of Al Azhar University Engineering Sector, Volume 9, Number 31, April 2014.

7. M. M. Salah1, S. A. Nagy and M. K. Al Shaer, "Load Frequency Control in Interconnected Power System via parallel ac/dc links and a Deregulated Environment, Journal of Al Azhar University Engineering Sector, Volume 9, Number 30, January 2014.

8. S. A. Nagy, A. M. M. Abdelfattah, "Substantially Dependant Parameters Errors Identification Using Synchronized PMU and Data Decorrelation in Power System", Journal of Al Azhar University Engineering Sector, Volume 9, Number 30, January 2014.

9. S. Nagy, Y. Rihan, I. Salama, A. Adail, “Robust Bad Data Detection and Identification When Using Phasor Measurements in state estimation in power system”, Coimbatore Institute of Information Technology (CiiT), Volume 5, Number 12, 2013.

10. S. A. Nagy, A. H. Osman, “Power System Load Frequency Control Based on Fuzzy Logic Control” Journal of Al Azhar University Engineering Sector, Volume 8, Number 27 April, 2013.

11. M. Y. E. Henna and S. A. Nagy, "Prevention of Cascaded Events of Distance Relay Zone Three Using Logic Controls", Conference Papers in Engineering, Volume 2013, Article ID 198021, 2013.

5

12. S. A. Nagy, “Branch Status Topology Errors Detection in power System State Estimation”, New York Science Journal, Vol. 5, No. 3, 2012.

13. A. Agwa and S. A. Nagy, “Using Wind Energy and Fuel Cells to Construct an Autonomous Energy System”, Journal of American Science, Vol. 7, No. 10, pp 305-311, 2011.

14. S. A. Nagy and M. A. El-Dabah, “New Technique for Topology Error IdentificationUsing Weighted Least Squares State Estimation”, Journal of Al Azhar University Engineering Sector, Volume 6, Number 21, October 2011.

15. S. A. Nagy, M. Y. El-sayed and M. I.Akar, “Enhancement Electrical Aspects of Cogeneration Distribution System Using Superconducting Magnetic Energy Storage (SMES) Unit”, Journal of Al Azhar University Engineering Sector, Volume 6, Number 18, January 2011.

16. S. A. Nagy, A. F. Bendary and El-Said A. Othman, “New Approach for Capacitor Allocation in Distribution system using Genetic Algorithms”, Journal of Al Azhar University Engineering Sector, Volume 5, Number 17, October 2010.

17. S. A. Nagy and El-Said A. Othman, “Weighted Least Squares versus Transformed Measurements Method in Power System State Estimation”, Journal of Al Azhar University Engineering Sector, Volume 5, Number 15, April 2010.

18. S. A. NAGY and M. I. AKAR,”Losses Reduction in Distribution Networks via Genetic Algorithm”, Journal of Al Azhar University Engineering Sector, Volume 3, Number 7, April 2008.

Engineering Professional Experience Egyptian Local Design Consultant for ENERTIS Spain (June 2015)

Project: DESIGN of SOLAR POWER PLANT of BENBAN 50 MW, PV PLANT – EGYPT;

Introducing consultancy services for ENERTIS to adapt and follow Egyptian regulation for Renewable Energy.

MEP Consultant and Engineer :( September 2007 – September 2015), Arab Consultant Engineers (ACE).

Worked as Design Manager, Consultant and Quality Assurance, Supervision of the MEP design for many and different types of projects (buildings and infrastructure) such as:

1. AIRPORT PROJECTS:

i. (2013 - 2015) TANZANIA, Julius Nyerere International Airport Terminal III Project.

The work scope was Design review and supervision of all electromechanical civil works, which includes but not limited to design review and approve of all electrical works for Main 33/11 kV Step down substation, main distribution transformer stations, emergency diesel generators, power distribution systems, lightings and small power systems design, all calculations and supervision of the selected materials as well as. Airfield Ground Lighting (AGL) System, Apron Lighting, Baggage Conveyance and Screening Systems, Horizontal and Vertical Conveyance Systems,

6

HVAC and Smoke Evacuation System, Grounding and Lightning Protection, Building Management Systems, Fire Alarm System and Roadway lighting

2. INFRASTRUCTURE PROJECTS:

i. (2015) King Abdullah New District (KAND) North JAZAN: Design infrastructure of Electrical MV and LV Networks, Civil work for Telecommunication networks. (Sub Consultant to ZFP).

ii. (2010-2012) Design infrastructure of Electrical work for MARASSY Tourist Village in North Coast, Egypt. Design of MV networks, SCADA system for water and waste water pump stations.

iii. Cairo URBAN Transport Infrastructure Development Project-(Project Preparation Study)

3. TRACTION AND METRO

i. (2012-2014) Electrical Design Manager and Quality Assurance of Electromechanical and BMS systems for Underground Stations, Greater CAIRO Metro Line 4- Phase 1 (16 Underground Stations, one at grade station, Tunnels and Cable shafts, High Voltage Station HVS and OCC Operation Control Center Buildings), Consultant for Japan International Cooperation Agency (JICA), Cairo, Egypt.

The works includes but not limited to all electrical works for power transformer stations, emergency diesel generators, power distribution networks, lightings and small power systems design, fire alarm system and Station Master Office system (BMS) and its interface with main SCADA system.

ii. (2013-2014) Quality Assurance of Lighting and Small Power Systems and their power panel boards and cables routes for Underground Stations, Greater CAIRO Metro Line 3- Phase 3, Sub-Consultant for SYSTRA Consulting, Cairo, Egypt.

iii. (2007-2009) Design review for Electro-Mechanical Civil Works of Rapid Metro DUBAI Red Line: Elevated and Underground Stations, Two Main Depots and Two Car Parks, Sub-consultant for SYSTRA/PARSON Dubai, Dubai, UAE.

The works includes but not limited to design review and approve of all electrical works for distribution transformer stations, emergency diesel generators, power distribution systems, lightings and small power systems design, all calculations and supervision of the selected materials.

iv. (2007-2009) Design review for Electro-Mechanical Civil Works of Rapid Metro DUBAI Green Line: Elevated and Underground Stations, Main depot and Car Park, Sub-consultant for SYSTRA/PARSON Dubai, Dubai, UAE.

The works includes but not limited to design review and approve of all electrical works for distribution transformer stations, emergency diesel generators, power distribution systems, lightings and small power systems design, all calculations and supervision of the selected materials.

7

v. (2009 and 2011-2012) Design review for Electro-Mechanical Civil Works of El SOFOUH Tram Project: Stations and Main Depot, Sub-consultant for SYSTRA Consulting, Dubai, UAE.

The works includes but not limited to design review and approve of from distribution transformer stations to power distribution systems, lightings and small power systems design, all calculations and fire alarm system and also approve of the used materials

4. UNDERGROUND CAR PARKING

The work includes but not limited to (Design and Supervision) of all electrical works for power substations, emergency diesel generators, power distribution networks, lightings and small power systems design, fire alarm system and Building Management Systems (BMS) and/or Control Systems.

i. (2010) MEP Design of Underground Car Park of Heliopolis Sporting Club, Heliopolis, Cairo.

ii. (2010) MEP Design of multi-floors Car park of Ministry of Foreign Affairs, Cairo

iii. (2010-2012) Participate in the Electro Mechanical design and supervision works of Al Tahrir Square Car Park, Cairo.

5. HOSPITAL, HOTELS, MALLS, OFFICES AND BANKS

Quality Assurance and Design of Electrical Systems (Power supply, LV distribution, Lighting and small power, Fire Detection, CCTV, BMS/SCADA and Special Systems) for:

i. CICPA (Critical Infrastructure and Coastal Protection Authority) Camps AL-RWUAIS and Port Zayed, Abu Dhabi; the camps contain administration, accommodation, military stores, restaurant, laundry, fuel station, reception buildings and etc. The work included; power supply, distribution system, outdoor/indoor and security lighting, fire alarm and security systems.

ii. (Till Schematic Design Phase ) New National Cancer Institute (NNCI 500500) Hospital including 1000 beds Inpatient, Outpatient, Faculty and Research Center, Conference Center, Nursing Institute and Housing. Cairo. ACE Represent Local Consultant.

The work includes review the concept and schematic design of electrical works, as well as, design of the power supply substation and manages the deals with ministry of electricity for extension of 66/22 kV substations.

iii. (2012-2013) Nour Ala Nour Hospital, 150 beds, Manshiat Nasser, Cairo.

iv. (2011-2012) JABAL OMAR Development project, Zone S3&S4 (Sheraton and Westin Hotels), Makkah.

v. (2011) DAMAC Park Avenue project, phase E & F, Cairo – Alex. Desert Road, Abu Rawash, Giza.

vi. (2008-2014) Many Bank Branches (Arab Bank Headquarter, CIB Branches, BNP Paribas, Egyptian National Banks) Egypt, National Bank of Yemen Adan.

vii. (2010) Value Engineering and design review for City Star Sharm Sheikh Pilot Project, Sharm Sheikh.

8

viii. (2012) Design Review for Electrical works of Credit AGRICOLE Egypt-Head Office Complex

6. WATER AND WASTE WATER PLANTS PROJECTS

i. (2014) Preparing bidding documents and design of MEP and SCADA systems works of Abu Rawash WWTP with capacity of 1.6 Million cubic meters per day. Consultant for Kharafi National Contractor (Cairo).

ii. (2013-2014) SCADA System Design Review and Supervision of New Cairo Water Treatment Plant, including 3 Pump Stations (Boosters) and Pipelines, 2 Million cubic meter per day.

iii. (2012-2015) Design review, Supervision, testing and commissioning of SCADA systems of AL-Fustat Water Treatment Plant.

iv. (2011-2014) Preparing tender document of Electrical and SCADA Control Systems works for many WTP and WWTP in KSA, (Mahayel - Aseer, ..)

v. (2010-2011) Electrical Utilities Design of Al-Ghaida Water and Waste Water Plants. Al Ghaida, Yemen.

vi. (2008) Preparing Tender document of the Electrical and Telemetry control systems design of Kotu Ring Rural Water Supply- Gambia.

vii. (2008-2010) Design Review and Supervision of Electromechanical work (All Electrical and SCADA Control Systems) for the Optimization of 1st Stage of GEA-WWTP 600,000 cubic meter per day (Cairo).

viii. (2008-2014) Electrical and Control consultations for many Water and Waste Water Treatment Plants (Egypt).

7. ROADS, BRIDGES AND STREET LIGHTING

(2009-2013) Design of electrical works (Street Lighting, Tunnel Lighting, Ventilation, Power Supply and SCADA control system) for many projects in Egypt, KSA, Albania, Moriches, Gambia and etc.

Consultant Engineer: (June 2006 – Sep. 2006), El-Marakby Steel Co.

Consultant Engineer for MEP Installation and Automation Systems of El-Marakby hot-rolling mill steel factory.

Expert for Electrical Planning of Urban Areas: (2006- 2010), NUCA, Cairo:

i. (2007-2008) Electrical and Communication General Planning and Infrastructure of El-Tour Sinai City, Assaf French Group, Urban Planner Office.

ii. (2009-2010) Electrical and Communication General Planning and Infrastructure of El-Manzala City, Assaf French Group, Urban Planner Office.

iii. (2007-2011) Electrical and Communication General Planning and Infrastructure of many small towns in Egypt, for Faculty of Engineering Al-Azhar University and NUCA.

Electrical Design Engineer: (Sep. 1996 – Oct. 2002), United for Investment & Constructional Developments Co., Cairo

9

Electrical Designer for many projects:

i. Design of (LAN) Local Area Network ( Menia & Asuit Gov.): Menia – Samalout – Der Mouas – Maghagha – Malawy – Al-Edwa – Wasta – Asuit Sharq.

ii. Electrical Supervision and installation of Be’r El Abd Irrigation Water pumps Station.

Electrical Engineer: (Aug. 1994 –May 1995) M. A. Dawoud & Co. 6th of October

Electrical Engineer (Production and Design Dept.): Production of single and three phase motors used in multiple industrial applications.

Referees:ACADEMIC REFEREES

i. Prof. Dr. El-Said A. Othman ; Professor of Electrical Power Engineering, Past Dean of Faculty of Engineering – Al-Azhar University, Cairo, Egypt (+20 120 26 000 38). Email; elsaidothman@gmail.com

ii. Prof. Dr. Mohamed A. Mostafa ; Professor of Electrical Power and Control Engineering, Faculty of Engineering– Cairo University, Giza Egypt (+20 100 47 16 887). email: drmmustafa1427@gmail.com

iii. Prof. Dr. Fahmy A. Bendary; Professor of Electrical Control Engineering, Faculty of Engineering Shoubra – Benha University, Cairo, Egypt (+20 100 41 92 410), email: fahmybendary10@yahoo.com

CONSULTATION REFEREESi. Eng. Bahaa Afify; ACE Project Manager, Giza Egypt (+20 100 60 300 12), email; bahaa.afifi@ace-

mb.com

ii. Eng. SHOJI SASAKI ; MEP Manager JICA, Email: sasaki-sj@n-koei.jp

iii. Eng. TOMOAKI KAGAMIDO, Director FUKI ASSOCIATES INC., (+81 78 261 29 26) email: kagamido_t@fai-bec.co.jp

10