Upload
gone15
View
224
Download
0
Embed Size (px)
Citation preview
7/28/2019 Shock braker
1/16
Select objects: 1 found
Select objects:
0 segments added to polyline
Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype
gen/Undo]: j
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects:
3 segments added to polyline
Enter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Undo]:
Command:
Command: PEDIT
Enter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Undo]:
Command:
Command:
Command: _revolve
Current wire frame density: ISOLINES=4
7/28/2019 Shock braker
2/16
Select objects: 1 found
Select objects:
Specify start point for axis of revolution or
define axis by [Object/X (axis)/Y (axis)]:
Specify endpoint of axis:
Specify angle of revolution :
Command: REVOLVE
Current wire frame density: ISOLINES=4
Select objects: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Regenerating model.
Resuming REVOLVE command.
Select objects:
Nothing selected.
Command: Specify opposite corner:
Command:
Command: '_.properties
Command: _.erase 1 found
7/28/2019 Shock braker
3/16
Command:
Command:
Command: _shademode Current mode: Flat
Enter option [2D wireframe/3D
wireframe/Hidden/Flat/Gouraud/fLat+edges/gOuraud+edges] : _3
Command:
Command:
Command: _-view Enter an option
[?/Orthographic/Delete/Restore/Save/Ucs/Window]: _front Regenerating model.
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: 23
Specify next point or [Undo]: 35
Specify next point or [Close/Undo]: 23
Specify next point or [Close/Undo]: c
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
7/28/2019 Shock braker
4/16
Specify next point or [Undo]:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
Command:
Command: _offset
Specify offset distance or [Through] : 5
Select object to offset or :
Specify point on side to offset:
Select object to offset or :
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: _3p Specify first point on circle: *Cancel*
Command:
Command: _arc Specify start point of arc or [Center]:
Specify second point of arc or [Center/End]:
Specify end point of arc:
7/28/2019 Shock braker
5/16
Command: Specify opposite corner:
Command: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects: 1 found
Select objects:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Command:
Command: _.erase 1 found
Command:
7/28/2019 Shock braker
6/16
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects: 1 found
Select objects:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Object does not intersect an edge.
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Command:
Command: _.erase 1 found
Command: pedit
Select polyline or [Multiple]:
Object selected is not a polyline
Do you want to turn it into one?
Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype
gen/Undo]: j
Select objects: 1 found
7/28/2019 Shock braker
7/16
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects:
3 segments added to polyline
Enter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Undo]:
Command:
Command: PEDIT
Enter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype
gen/Undo]: *Cancel*
Command:
Command: _revolve
Current wire frame density: ISOLINES=4
Select objects: 1 found
Select objects:
Specify start point for axis of revolution or
define axis by [Object/X (axis)/Y (axis)]:
Specify endpoint of axis:
Specify angle of revolution :
7/28/2019 Shock braker
8/16
Command:
Command:
Command: _move
Select objects: 1 found
Select objects:
Specify base point or displacement: Specify second point of displacement or
:
Command:
Command:
Command: _subtract Select solids and regions to subtract from ..
Select objects: Specify opposite corner: 0 found
Select objects: 1 found
Select objects:
Select solids and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _shademode Current mode: 3D wireframe
7/28/2019 Shock braker
9/16
Enter option [2D wireframe/3D
wireframe/Hidden/Flat/Gouraud/fLat+edges/gOuraud+edges] : _f
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Regenerating model.
ommand:
Command:
Command: _u INTELLIZOOM
Command:
Command:
Command: _u 3DORBIT GROUP Regenerating model.
Command:
Command:
Command: _u SHADEMODE GROUP
Command:
Command:
Command: _u SUBTRACT GROUP
Command:
Command:
Command: _u MOVE GROUP
Command:
Command:
Command: _move
7/28/2019 Shock braker
10/16
Select objects: 1 found
Select objects: *Cancel*
Command:
Command: _u GROUP
Command:
Command:
Command: _u INTELLIZOOM
Command:
Command:
Command: _u INTELLIZOOM
Command:
Command:
Command: _u REVOLVE GROUP
Command:
Command:
Command: _move
Select objects: Specify opposite corner: 1 found
Select objects:
Specify base point or displacement: Specify second point of displacement or
: *Cancel*
Command:
7/28/2019 Shock braker
11/16
Command:
Command: _u MOVE GROUP
Command:
Command:
Command: _u PEDIT
Command:
Command:
Command: _u PEDIT
Command:
Command:
Command: _u ERASE
Command:
Command:
Command: _u TRIM GROUP
Command:
Command:
Command: _u ERASE
Command:
Command:
Command: _move
Select objects: 1 found
Select objects:
Specify base point or displacement: Specify second point of displacement or
: 2
7/28/2019 Shock braker
12/16
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects: 1 found
Select objects:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Command:
Command: _.erase 1 found
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects: 1 found
Select objects:
7/28/2019 Shock braker
13/16
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Object does not intersect an edge.
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Object does not intersect an edge.
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Command:
Command: _.erase 1 found
Command: pedit
Select polyline or [Multiple]:
Object selected is not a polyline
Do you want to turn it into one?
Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype
gen/Undo]: j
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
7/28/2019 Shock braker
14/16
Select objects:
3 segments added to polyline
Enter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Undo]:
Command:
Command:
Command: _revolve
Current wire frame density: ISOLINES=4
Select objects: 1 found
Select objects:
Specify start point for axis of revolution or
define axis by [Object/X (axis)/Y (axis)]:
Specify endpoint of axis:
Specify angle of revolution :
Command:
Command:
Command: _move
Select objects: Specify opposite corner:
7/28/2019 Shock braker
15/16
Invalid window specification.
Select objects: Specify opposite corner: 0 found
Select objects: 1 found
Select objects:
Specify base point or displacement: Specify second point of displacement or
:
Command: Specify opposite corner:
Command:
Command:
Command: _subtract Select solids and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _shademode Current mode: 3D wireframe
7/28/2019 Shock braker
16/16
nter option [2D wireframe/3D
wireframe/Hidden/Flat/Gouraud/fLat+edges/gOuraud+edges] : _f
Command: '_3dorbit Press ESC or ENTER to exit, or right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _copy
Select objects: Specify opposite corner: 0 found
Select objects: 1 found
Select objects:
pecify base point or displacement, or [Multiple]: Specify second point of
displacement or :
ommand:
Command:
Command: _-view Enter an option
[?/Orthographic/Delete/Restore/Save/Ucs/Window]: _top Regenerating model.
Command:
Command:
Command: _-view Enter an option
[?/Orthographic/Delete/Restore/Save/Ucs/Window]: _swiso Regenerating model.