Upload
velosystem
View
267
Download
0
Embed Size (px)
DESCRIPTION
The Official Catalogue of Velosystem Bike Fitting Tools
Citation preview
index Tools for the anthropometric's measurement
Testing Tools
Tools for testing and setting
Tools for measurement and setting
Antropovelò
Dynavelò Professional
Mep
Dynavelò Basic
Checkboardvelò
Kinematicsvelò �rst level
Kinematicsvelò top level
Barosaddle
Deskmeasurevelò
Measurevelò Kit
Measurevelò
Ischiovelò
Podovelò
Podoreset
Barocheckvelò
3 19
21
23
25
27
29
33
35
14
Softvelò 15
17
7
9
12
13
Performance test
Cornervelò
Velosystem Bike Fitting Centers
37
39
41
12
12
SB 4 Professional
Cornervelò Basic
Pointvelò
Frinchising Velò
Cornervelò Evolution
3
antropovelò
. identify the correct frame size
. identify the setting's parameters
. identify the right position of the shoe/pedal cleats
. identify the right width of the saddle
. identify the right size of the handlebars
. identi�cation of the biomechanics check up
Antropovelò can be used by Biomechanic Technician and cycling Shop Manager.
accessories
dimensions
purpose
ANTROPOVELO’
ISCHIOVELO’
Vertical Panel Base Stand
11 kg20 kg
1 kg
225 cm 45 cm
58 cm58 cm
3 cm3 cm
35 cm
35 cm
31 cm
45 cm 45 cm
PODOVELO’
PODORESET
7 cm 30 cm
30 cm2 cm1,5 kg
Antropovelò is a Biomechanic software system to take accurate anthropometric measurements,resulting in the ability to:
SOFTVELò - Biomechanic softwareMEASUREVELò – caliber for anthropometric's measurementISCHIOVELò – meter for the sciatic supportPODOVELò – meter for the measuremen of the heel - metatarsalBARVELò – bar for �exibility measurement INTERACTIVE CD for easy learningTRAINING COURSE
4
antropovelò Antropovelò takes exactly all the anthropometric measurements in a manual mode.
The innovative features of Antropovelò are represented by:
- electronic detection of anthropometric measurement
- description available for both genders
- professional image
- ensures each reporting of data reliability after 3000 cycling reports
What does it measure ?
Total heightCrotch’s heightTrunk lenghtShoulder widthArm width
Forearm widthFemur lenghtTibia lenghtDHM - Distance heel - metatarsalWSS - Width of sciatic support
7
Measurevelò is a calibration aid for anthropometric and biomechanics measurement. Furthermore, it gives you the possibility to take the frame's measurement and bike set-up.
Measurevelò is included in the kit. It could be sold individually, but it is equipped with the main tools too.
- extreme manageability and easy to use
- accurate frame measurement
- accurate bike set up
measurevelò
Features
8
ANTHROPOMETRIC MEASUREMENT BIOMECHANICS MEASUREMENT
measurevelò
Stem lenght
Shoulder width
Arms lenght
Forearm lenght
Femur lenght
Tibia lenght
Crossbar
Seat tube
Front rake
Back rake
Seat height
The fore aft saddle position
Distance between seat and handle center
Distance between seat and handlebar
Distance between seat and levers
Di�erence between seat and toe clip
9
Ischiovelò is a system to record an accurate anthropometric mea-surement of the sciatic support, the result being to identify the right saddle.
The sciatic bones, right and left, are the supports of the pelvis whilst sitting.The distance between the the 2 bones lets you know which is the right size for your seat.
ISCHIOVELO’ is a special sitting arranged to put on a speci�c dis-posable tester.
- extreme manageability and easy to use
- Moderate measurement for both genders
Features
ischiovelò
10
Purpose
You can choose between the seats available commercially which is the right one to suit your physical structure
ischiovelò
11
ischiovelò Tester
ISCHIOVELO’ TESTER is a disposable tester used to identify the right saddle design for the cyclist
It is a special corrugated, printed board, used to take a ischiatic print. The result will be processed by a default list to identify the right seat model.
Purpose
Package
This system helps to take the correct measurement of the sciatic support, �nalized to know the size of pelvis
50 Ischiovelò Tester1 Computation table with the measurements of the saddles.
12
podovelò
PODOVELO’ is a measurement system for the distance between heel and metatarsus.
It is composed of a plexiglass table and 2 cursors for the measurement process.
Features
PurposeIt is essential for the setting and positioning of the shoe cleats.
13
podoreset
PODORESET is a table to test the symmetry of feet and knees.
Features
Purpose
PODORESET is composed of a forex table and a rear support.
What does it measure?
This system helps to �nd asymmetry of the foot and the leg and �nd even-tual dysmorphismes.
It measures the length of the foot and the asymmetry of the leg.
14
BaroIschiometria Dinamica
R i levazione dinamica del l ’ ap-poggio del ramo ischio-pubico del bacino durante la pedalata
barosaddlevelò
Barosaddlevelò is a sensor system attached to the seat to assess the pelvic pressure whilst cycling.
Features
Information is gathered by use of a seat sensor, a special sock that doesn't alter the riders position during use. The BaroSaddleVelò System assesses the quantity and quality of the support for the pelvis on the seat during cycling.
Software
- testing of the High/Low pressure, contact time and full time pressure
- movies of the pressure
- testing by sector: right/left, front/back and personal sectors
15
softvelò
Softvelò is an anthropometric cycling software system.
It is professional software for technical and biomechanics man-agement, for single or groups of cyclists, but under technician control.
Features The use of the software is simple, intuitive and includes the following features: :
- Cycling costumer data- Anthropometric measurements directories- Anthropometric measurements data- Data storage of the frame and the setting- Possibility to prints the information with your personal logo
16
softvelò
Applications
This is a professional software system for technical and biomechanics management, for single or groups of cyclists, designed for use under technician control (mechanic, biomechanics, bike shop manager and bike team manager).
This management software can be used for storing cycling technical information (single or team), includes the archiving of the sizes (frame, components and setting), physical sizes, bike maintenance, cycling events (amateurs and professional) .
17
barocheckvelò
Barocheckvelò is a barometric platform.
In the �eld of cycling biomechanics, Barocheckvelò evaluates baro-pomodometric information in static, dynamic and also baroischio-metric form.
Features
Purpose
Dimensioni
Sensori
70 cm 50cm 0,5cm
Numero totale 2304 dim.
Densità 1x2cm
Tool allows you to de�ne the characteristics of the plantar to realize the ergonomic custom insoles. The evaluation of the sciatic support allows you to de�ne the size of the ideal saddle.
18
barocheckvelò Features
Professional Use
The BaroCheckVelò platform simpli�es the measurement process of the sciatic support and foot support in static and dynamic conditions and in both directions. Another used is the assessment of the barycentre movement.
It is used in biomechanic lab and also as sale support of saddles and ergonomic plantar.
19
measurevelò kit
Measurvelò kit is a kit for the measurement of the bike frame and for the bike set up.
Features
Purpose
It can be used for measurements and quick setting up of the bike for both leisure, amateur and professional cyclists. It can:
Measure the body segments
Check the setting measurements
Check the frame measurements
Easy to handle and use
Equipped to take all the setting measurements
User manual and details sheets
20
measurevelò kit
Accessories included
Box Sizes
For who is it?
Levelvelò Metrovelò Markervelò Plombvelò
Measurevelò kit can also be used for cyclists who want the correct bike set up.
1,23kg 71cm 24,5cm 6cm
21
deskmeasurevelò
Deskmeasurevelò is a professional bench for the measurement and control of the bicycle frame and setting.
Features
Purpose
Measures
It improves the accuracy, speed of measurement and control of the bike therefore raising the quality, reliability and ensuring a professional �tting service.
125 cm 35 cm 95 cm 195 cm
49,2
Measuring the geometry of the frame
Measurement of buoyancy setting
Setting control parameters
Extreme manageability
22
deskmeasurevelò
Horizontal length
Seat height
O�set column
Height head tube
Your steering angle
Front wagonrear wheelbase
Misurazioni possibili
Seat height
Saddle setback
Di�erence seat - attack
Saddle-handlebar distance
Saddle-brake lever distance
23
checkboardvelò
This is a portable workstation for control and veri�cation of the cyclists setting both whilst stationary and pedaling.
Features
Purpose
It consists of a foldable PVC base, with special graphics and other elements that may be �tted:
3 sliding tracks with special supports and a professional self-leveling laser.
1 CICLOTRAINER (turbo trainer) CRONO FLUID specially posi-tioned.
Accessories and testing equipment to measure the angles at the knee and shoulder.
Checkboardvelò allows the control and improves the posture of the rider during pedaling.
24
checkboardvelò
It does checking and testing the front and side settingThis checks and tests the position from both the side and front to optimize the riders position
FRONT LATERAL
seat heightsaddle setback di�erence seat - handlebar distance saddle - handlebar
Professional Use
CheckBoard Pack
Check boardvelò can be used for technical and biomechanics man-agement, for single or groups of cyclists, designed for use under technician control (mechanic, biomechanics, bike shop manager and bike team manager).
Boardvelò
Laservelò
Crono�uid
knee alignment to the center pedalankle foot alignment to the center pedalhip alignment to the center pedalalignment symmetry left and right
Training Course
CPS
dynavelò basic
Dynavelò basic power is a biomechanical simulator which is able to measure the power of the cyclist
Features
Simulation and verification
Dynavelò basic power is a biomechanical simulator which is able to give at the technician or the bike shop manager the cy-clists power output.
Dynamo Basic Power is able to reproduce and modify the setting conditions of: saddle height and setback di�erence , saddle handle-bar distance , saddle handlebarcrank length , seat width , handlebar width.
The changes are only possible if the cyclist is stopped and not whilst in motion.The front laser check optimizes the alignment of the cyclist from the front and side.
25
26
dynavelò basic
Purpose
Included accessories
Measures
Permette di valutare e modi�care verso l’ottimizzazione tutti i parametri di assetto del ciclista con la �nalità di migliorare comfort e prestazione e di individuare il telaio ideale.
1 tester Degreevelò2 Laservelò1 Powercheck
140cm 50cm 165cm50 kg
27
dynavelò professional
Dynavelò Professional is a biomechanical training simulator able to change the cyclist setting during pedaling and mea-sure e�ciency by monitoring the data.
Features
Simulation and verification
Purpose
The technician is able to assess the e�ciency and biome-chanical setting through a simulation.
The dynamic set-up during the ride are:height and setback of saddle, di�erence of height between handlebar saddle (drop), saddle handlebar distance.
To be able to check and modify all the setting pa-rameters of the cyclist improving the comfort and performance to assist in �nding the ideal frame.
28
dynavelò professional
Included accessories
Professional use
1 Degreevelò tester2 laser Velò SRM training system + online version + pedaling tester + clips ( 160 -180 mm )
It can be used by biomechanics technician and shop manager with service center.
Measures
70 kg 160cm 50cm 165cm
29
mep
Features
The MEP (meter e�ciency pedaling) is an innovative piece of equipment for measuring biomechanical parameters. The elec-tronic system includes electronic clips and a PDA and software
EP system controls the parameters of the clips/pedal cleats on the right and left and draws the following values :
Power (Newton) pushing down and pulling up with the report detailing % UP / DOWN
Posture (mm OFFSET) indicates the position of thrust in all con-ditions
Power (WATT) individually through each leg/pedal cleat and also the total combined wattage/power.
Kilojoule (Kj) these parameters are correlated with other
parameters wich are:
Hartbeat: pulses per minute
Speed: (KM/h)
Cadence: (giri/min) other details are on computer with gps
30
EP system controls the parameters of the clips/pedal cleats on the right and left and draws the following values :
Power (Newton) pushing down and pulling up with the report detailing % UP / DOWN
Posture (mm OFFSET) indicates the position of thrust in all con-ditions
Power (WATT) individually through each leg/pedal cleat and also the total combined wattage/power.
Kilojoule (Kj) these parameters are correlated with other
parameters wich are:
Hartbeat: pulses per minute
Speed: (KM/h)
Cadence: (giri/min) other details are on computer with gps
mep Evaluation and analysis
All the details are held on the PDA on which it is possible to control all the param-eters, analyze and record all the tours and view them on the computer (GRAPH and STATISTIC)Pressing the button NEXT and START/STOP on MULTIFUNZIONE and TOUCH SCREEN you have the possibility operate a lot of settings: for example change the screen and record the test and the trainings, technical notes, which are inputted in the relative �les.
2 Clips/pedal cleats, right and left, distances from 170 to 180 mm with electronic tools and quick connectionChainrings adaptable to di�erent types BCD (110, 139, 135 etc…)Linchpin of connection, integrated connectors, available in standard sizesCardio/heart rate monitor strapCadence sensorSmartphone, with software to view and record system, with a handlebar mounting bracketBattery charger 220 VAC (more or less 3 h for completing charging of system)
Specifications
!
31
The software For more accurate and detailed analy-
sis, in addition to smartphone view
and record, the software is able to
manage all the details on your com-
puter (not only with the PDA) which,
in addition to connecting with your
smartphone, can also be used direct.
The software can be used on line and
is completely dynamic, versatile and
able to adapt to customer needs.
!
mep
32
2 Clips/pedal cleats, right and left, distances from 170 to 180 mm with electronic tools and quick connectionChainrings adaptable to di�erent types BCD (110, 139, 135 etc…)Linchpin of connection, integrated connectors, available in standard sizesCardio/heart rate monitor strapCadence sensorSmartphone, with software to view and record system, with a handlebar mounting bracketBattery charger 220 VAC (more or less 3 h for completing charging of system)
!
mep
33
Operative Pack
kinematicsvelò first level
Kynematicsvelò First Level it a package which includes a
Dart�shlive software, install and calibration images, opera-
tional and training protocols.
Velosystem choose Dart�sh live as Platform for its software
to analyze the cyclist conditions out and indoors. It can be
easily be used by Team manager, biomechanics technician
and team builders.
Kinematicsvelò First Level is one of the most important
tools used by Velosystem to analyze the pedaling
technique/motion to improve the biomechanic setting of
the road cyclist, mountain biker or triathlete.
Le caratteristiche del KinematicsVelò_First_Level sono rappresentate da una serie di elementi capaci di fornire all’operatore un pacchetto di analisi cin-ematica chiavi in mano:
• Progettazione allestimento• Installazione dispositivi acquisizione video• Licenza Software Dartfish Live per singolo dispositivo• Protocollo operativo analisi cinematica• Formazione Base (ore 4)
35
Operative Pack
kinematicsvelò top level
Kynematicsvelò top level is a superior version of the �rst
level. Upgrades include the installation and calibration of
imaging devices DARTFISH PRO SUITE. This platform is
more evolved and compliant, suitable for more detailed
technical bike set up and for those who wish to have a more
comprehensive package than the First Level version.
Kynematicsvelò top level is more advanced than First Level and includes the following:
Design and construction MULTICAMDevice setup videoDart�sh PRO SUITE software license for single deviceAdvanced Test ProcedureBasic Training course (4 hours)
37
Features
ergovelò sb4
Ergovelò SB4is a professional bike-simulator for the athletic test.
This version is dedicated to the most demanding technician.It is able to monitor and record the speci�c �tness testing, for example the anaerobic test threshold with increasing WATTAGE and SPEED, the test of power (for 10 seconds and 250 meters).It is connected to the computer for on-line monitoring and data recording with speci�c soft-ware.
Elastic System Swing:Unique system able to make swinging the bicycle with-out the front wheel and fork block possible. The frame protection is guaranteed.
38
ergovelò sb4
Sizes Specifications
180cm 520cm 121cm60kg
Electromagnetic brake:tested, calibrated and calibratable, reliable, with-out maintenance and quiet
Volano: heavy and with high number of turns, it repro-duces exactly the activity between man-bicycle
On-board computer: easy and intuitive on 32-bit softwareBright dis-play with backlit LCD screenWheel clamping: for any slippage and tire punctures
Custom Calibration
Customizing the coe�cients
39
Services
cornervelò basic
The Cornervelòbasic is a space in the bike bike shop where you can promote your biomechanics services.
The corner velò is set up with professional and advanced tools, there is a data management software that is con-stantly updated and supplemented by a protocol. This corner is made after technical training for the use of instru-ments, software and services of the biomechanics.
Biomechanical professional service
System reliability
Tools, software and protocol are the result of more than 3000 cycle tests with people of every age, gender and level/ability. All cyclists were submitted to anthropometric measurements and were compared with other test results.The data extracted and integrated into the software have con�rmed the reliability of the system and con�rmed that the results of the ideal frame and setting are exact.
The space takes only 2m x 2m and in this corner you can take the measurement of the cyclist for a professional search to establish the right frame size.
41
Cornervelo requires only 2m x 2m, and in this space you can take the measurements of the cyclist fora professional search for the right frame size using the equipped Deskmeasurevelò software/program-me.3m x 2m space is required for the professional measurement service for the cyclist to �nd the ideal frame and the right settings established by Precision Bench
Services
Easy to use
Sale motivation
Media
cornervelò evolution
Tools and software are designed to make simplify each biomechanics operation, with great professionalism. Fol-lowing the training course the technician is ready to use the system.
The Cornervelò is a valid visual aid to assist the sale of bicycles because it helps toreassure the customer that their choice of equipment (frame or bike) is correct through a detailed technical and professional �tting service.
The Cornervelò in-store display unit is equipped with a monitor which attracts the attention of the visitors in the shop. The station is equipped with a presentation program.
43
What ?
Who ?
bike fitting centers
The Bike �tting centers are Velosystem’s Accredited Centers which o�er services and technical products for the health and the optimum performance of the cyclist.There are 2 kind of centres: Pointvelò and FranchisingVelò.The Key Feature of a Velosystem center is the service quality, continuous research, professionalism and competence of the products o�ered.
Products and services o�ered by a Bike Fitting Center are:
Biomechanics consultancy
Consulting service training
Technology products for health and performance
The technical manager of a Bike Fitting Velosystem center must display and have competence, passion and empathy. His professionalism is supported by training, constant support, and technical updates from the technicians at Velo-system.
44
Where ?
How much does it cost?
bike fitting centers
The minumun space required for a Pointvelò and for a FranchisingVelò must be from 30 square meters an up to 40 square meters.
The �rst investment is approximately a Pointvelò is between 7,000 and 13,000 euros. instead Franchisingvelò from
15,000 until 25,000 euros
Franchisingvelò’s contract is protected by an exclusive contract and the duration for the Pointvelò Franchis-
ingvelò is for a minimum of 2 or 3 years and is renewable thereafter.
The cost of Bike Fitting Centers Velosystem assistance is included in the �rst year of the contract, from the second
year for the Pointvelò the cost is 900 euros + VAT yearly and for the Franchisingvelò 1200 euros + VAT yearly
The price includes the advertising campaign the license to use the logo as well as ongoing technical assistance
and technical updates
45
Velosystem support
bike fitting centers
Technical training, constant updates (2 sessions per year approximately) Training and/or management consulting Technical management software Initial support and marketing strategy Advertising on the most popular bike’s magazines Web communication Business Plan.
BE DIFFERENT.
BECOME A VELOSYSTEM BFC