Email: [email protected], Phone: 2194138873
PORTFOLIO
Mohammad Kamrul Islam
Graduate Mechanical Engineering Student
Purdue University Calumet
Email: [email protected], Phone: 2194138873
3D modeling
CFD simulation FEA analysis
Surface modeling
Email: [email protected], Phone: 2194138873
Structural Analysis of Motorcycle chassis Ansys
Loads and support Equivalent strain
Equivalent stress
Total deformation
Email: [email protected], Phone: 2194138873
3D Modeling of Wind turbine with detail gear mechanism Solidworks
Email: [email protected], Phone: 2194138873
Stress and Strain Analysis of planetary gear used in wind Turbine
Ansys
Stress Analysis
Total Deformation Strain analysis
Email: [email protected], Phone: 2194138873
Design & Optimization of an Existing Duct to Minimize Pressure Drop Through Flow Analysis
Ansys Fluent
Objective: The main objective of this project was to redesign an existing duct outlet to reduce the pressure drop.
Pressure curve
Result: Modified design 2 had the less pressure drop. Bend geometry in the existing duct was responsible for the pressure increase due to recirculation of flow.
Geometry
Velocity Streamline
Velocity Contour
Email: [email protected], Phone: 2194138873
FLUE STRUCTURAL AND THERMAL MODELING OF AN ANODE BAKING FURNACE
Autodesk Inventor and Ansys
Summery: Develop a valid 3D model of an anode baking furnace of Alcoa Warrick plant in Autodesk Inventor. Finite Element Analysis of baking furnace in ANSYS. Mapping thermal model results developed by another graduate student to structural model for stress, strain and deformation analysis. Conduct a parametric study to evaluate different size brick wall designs to provide optimum wall configurations.
3D model of anode baking furnace (Single)
Due to NDA it’s not possible to provide details analysis results
Email: [email protected], Phone: 2194138873
Surface Modeling Client: Matsuda Model Japan Software: CATIA V5
Matsuda model japan is a renewed toy manufacturing company. This project focused on 3d surface modeling and assembly of PACHINKO MACHINE in CATIA V5R20 Generative Shape Design (GSD) and Assembly Design module for 3D printing & injection molding.
Email: [email protected], Phone: 2194138873
Parametric 3d Modeling Client: Yokohama tire Japan Software: CATIA V5
Email: [email protected], Phone: 2194138873
Sheet Metal Modeling Client: Metso Mineral USA Software: ProE
CRUSHING FRAME Assembly
Email: [email protected], Phone: 2194138873
Image to 3D modeling & Assembly Solidworks
Customer Image 3D modeling and Assembly
Email: [email protected], Phone: 2194138873
Some 3D Modeling Sample Solidworks, Creo, Catia
Disk Break
Headphone
Shock Absorber
Heat Exchanger
Recommended