1
7/24/2019 Anco Pine Fiber http://slidepdf.com/reader/full/anco-pine-fiber 1/1  ANCO PINE FIBER Solutions Through Technology………. Environmentally Friendly Chemic Product Description   ANCO PINE FIBER is ground pine or spruce fiber, available in various sized particles, and used as an additive for the control of loss of circulation. Typical Application  ANCO PINE FIBER is applicable for water based drilling fluids as an additive for resolving loss of circulation. It is not recommended for oil based drilling fluids without careful pilot testing. ANCO PINE FIBER is used as a seepage contro agent and loss of circulation preventative. ANCO PINE FIBER is often used in conjunction with Mica, Nutshell or very course loss circulation materials, such as Cottonseed Hulls to help bridge and seal loss circulation zones. Product Advantages  - Has minimal affect on fluid rheology, filtrate rate, viscosity and cuttings carrying capacity of drilling fluids. - Can be rapidly and effectively mixed through the hopper. - Is an inexpensive, very effective loss circulation material. Recommended Treatment  Use 5 – 20 lb/bbl sweeps for seepage losses. 20 – 40 lb/bbl for total loss returns, either alone or with combination of other loss circulation materials.  Handling Employees should utilize normal precautions when handling chemical products. The use of dust mask, safety goggle and gloves are recommended when handling this product. In case of eye contact, flush with clean, fresh water to rem the material. If irritation occurs and persists seek medical advice. Review the Material Safety Data Sheet (MSDS) for product prior to use. Storage Store in an area protected from precipitation, mechanical damage and contact with moisture. Packaging   All grades are supplied in 20 lb polypropylene bags. Typical Chemical and Physical Properties  Bulk density, lb/ft³ . . . . . . . . . . . . . . . . . . . . . . .. 22 - 26 Solubility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Insoluble in water  Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . Course fibrous material Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Light tan to yellowish Odor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Woody © 2001 Anchor Drilling Fluids USA, Inc. el: (918) Fax: (918) 583-7 T 583-7701 2431 E 61 st  Street, Suite 710, Tulsa, Oklahoma 74136 

Anco Pine Fiber

Embed Size (px)

Citation preview

Page 1: Anco Pine Fiber

7/24/2019 Anco Pine Fiber

http://slidepdf.com/reader/full/anco-pine-fiber 1/1

 ANCO PINE FIBER

Solutions Through Technology………. Environmentally Friendly Chemic

Product Descrip tion  ANCO PINE FIBER is ground pine or spruce fiber, available in various sized particles, and used as an additive for thecontrol of loss of circulation.

Typical Application 

 ANCO PINE FIBER is applicable for water based drilling fluids as an additive for resolving loss of circulation. It is notrecommended for oil based drilling fluids without careful pilot testing. ANCO PINE FIBER is used as a seepage controagent and loss of circulation preventative. ANCO PINE FIBER is often used in conjunction with Mica, Nutshell or verycourse loss circulation materials, such as Cottonseed Hulls to help bridge and seal loss circulation zones.

Product Advantages - Has minimal affect on fluid rheology, filtrate rate, viscosity and cuttings carrying capacity of drilling fluids.

- Can be rapidly and effectively mixed through the hopper.- Is an inexpensive, very effective loss circulation material.

Recommended Treatment Use 5 – 20 lb/bbl sweeps for seepage losses. 20 – 40 lb/bbl for total loss returns, either alone or with combination ofother loss circulation materials. 

Handling 

Employees should utilize normal precautions when handling chemical products. The use of dust mask, safety goggleand gloves are recommended when handling this product. In case of eye contact, flush with clean, fresh water to remthe material. If irritation occurs and persists seek medical advice. Review the Material Safety Data Sheet (MSDS) for product prior to use.

Storage 

Store in an area protected from precipitation, mechanical damage and contact with moisture.

Packaging 

 All grades are supplied in 20 lb polypropylene bags.

Typical Chemical and Physical Properties 

Bulk density, lb/ft³ . . . . . . . . . . . . . . . . . . . . . . .. 22 - 26Solubility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Insoluble in water

 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . Course fibrous materialColor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Light tan to yellowishOdor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Woody

© 2001 Anchor Drilling Fluids USA, Inc. el: (918) • Fax: (918) 583-7T 583-7701

2431 E 61st Street, Suite 710, Tulsa, Oklahoma 74136