Bartın University Faculty of Engineering Mechanical

Bartın University Faculty of Engineering Mechanical Engineering Department Course Conntents

Belge Dogrulamak Için: http://ubys.bartin.edu.tr/ERMS/Record/ConfirmationPage/Index adresinden EMUCM43 kodu girerek belgeyi dogrulayabilirsiniz.

1800083829 numarali belge, 5070 sayili Elektronik Imza Kanununun 5. maddesi geregince Mustafa Sabri Gök tarafindan28.11.2018 tarihinde güvenli elektronik imza ile imzalanmistir.

Bartın University Faculty of Engineering Mechanical Engineering Department Course Contents




MECANICAL ENGINEERING COURSE CONTENTS

1st YEAR FALL SEMESTER (I. TERM )

MAK117 – TECHNİCAL DRAWING (2-2) 6

COURSE CONTENT

Geometric drawings, projection methods and dimensions, scaling, section views, sub-views, isometric views.

MAK119 – WORKSHOP TRAINING I (2-1) 4

COURSE CONTENT

Workshop and laboratory presentation, security measures, presentation and use of measurement instruments, introduction of machine tools, machine tools cutting edge presentation, hand fitting training applications.

MAK121 – INTRODUCTION TO MECHANICAL ENGINEERING AND ETHICS (2-0) 3

COURSE CONTENT

Description of engineering and engineer, duty and work field of a mechanical engineer, basic concept in mechanical engineering and its practical applications.

ORD133 – PHYSICS I (3-0) 4

COURSE CONTENT

Unit systems; Vectors; One dimensional motion; Two dimensional motion; Newton’s laws of motion; Applications of Newton’s laws of motion; The Newton’s law of universal gravitation; Work and energy; Conservation of energy; Momentum; Motion of systems; Statical equilibrium of rigid bodies; Angular momentum and rotation; Properties of matter.

ORD139 – MATHEMATICS I (4-0) 6

COURSE CONTENT

General concepts, Clusters, Natural numbers, Integer numbers, Rational numbers, Real numbers, Complex numbers, Linear equation systems, Solutions of linear equation systems Examples, Function concept, Trigonometric functions, Exponential and logarithm Functions, Limit, Continuity, Derivative and geometric meaning, Derivative rules, Partial Derivatives, Chain rule, Inverse derivative, Introduction to indefinite integrals, Integration methods, Definite integral.

Page 1 / 25




ORD143 – BASIC INFORMATION TECHNOLOGY (2-0) 4

COURSE CONTENT

Parts of a computer. Local and general computer networks. Introduction to Operating systems, Windows operating system. Word Software, Excel Software, Power Point Software, Using Internet

ORD191 – FOREIGN LANGUAGE I (3-0) 3

COURSE CONTENT

Phonetics, Numbers, Nouns, Pronouns, Negatives and Questions, Prepositions of time, Present Simple, Present Continuous, Past Simple, Comparative adjectives, Dates, Present Perfect, Model verbs.

1st YEAR SPRING SEMESTER (II. TERM)

MAK120 – WORKSHOP TRAINING I (2-1) 4

COURSE CONTENT

Basic machining operations and applications, introduction of machine tools (drill,shaper, and so on) used in machining, use of cutting tools and apparatus, operations used in these types of machine tools, sharpening of cutting tools, machining and forming using hand tools, tapping, metal removing in shaper, tool manufacturing, safety rules and format of lathe operation, introduction of lathe machine parts, tool kits used in lathe machine, cutting tools used in lathe machine and to make ready these tools for cutting, process difference of working pieces between miror-spot or two spots, applications of turning operations.

ORD134 – PHYSICS II (3-0) 4

COURSE CONTENT

Coulomb force; Electric field; Electric flux; Gauss's law; Electric potential; Capacitors; Current generation and resistance; Direct current circuits; Kirchhoff's laws; Magnetic field; Biot-Savart law; Ampere's law; Induction; Faraday's law; Lenz's law; Inductance; Energy in magnetic field; Oscillations in an LC circuit; Electromagnetic waves.

ORD138 – MATHEMATICS II (4-0) 6

COURSE CONTENT

Vector value functions and curves in space, Zone transformations, Jacobien, Lines and planes in three-dimensional space, Cylinders, cones and spheres, Cylindrical and spherical coordinates, Polar coordinates, Multivariable functions, limit, continuity and partial derivatives, Curvilinear integrals, Surface integrals, Series.

Page 2 / 25




ORD140 – GENERAL CHEMISTRY (3-0) 4

COURSE CONTENT

Chemical principles and their application. Includes stoichiometry, states of matter, atomic and molecular structure, chemical bonds, solutions, thermodynamics, equilibrium, oxidationreduction, kinetics, gases, nonmetals, metals and coordination compounds, and nuclear chemistry.

ORD192 – FOREIGN LANGUAGE II (3-0) 3

COURSE CONTENT

Tenses (Past perfect, Present perfect continuous, Modal perfect), Indirect speech (Imperative, Statement, Questions and mixed types), Conditionals and unreal past (type I, type II, type III), Modals.

MAK122 – COMPUTER AIDED TECHNICAL DRAWING (2-1) 4

COURSE CONTENT

AutoCAD's working principles, basic drawing, three-view drawings, dimensioning, sectional views, obtaining isometric perspective drawing, blocks and surface machining practice, tolerance applications, screws, nuts, bolts and washers drawing principles, connection examples made by hex-head bolts, wedged links, pulley assembly drawing application, connectors (pin, pin, rings, clips, bracelets), ball bearings, drawing applications relative to fixed ball bearing, cross-section and assembly drawings examples.

MAK124 – STATICS (4-0) 5

COURSE CONTENT

Definition of mechanics and parts. Statics of particles. Rigid bodies. Equivalent force systems. Equilibrium of rigid bodies. Distributed forces. Center of gravity. Conveyor systems design. Friction. Moments of inertia.

2nd YEAR FALL SEMESTER (III. TERM )

MAK207 – THERMODYNAMICS I (3-0) 5

COURSE CONTENT

Basic concepts of thermodynamics, properties of pure substances, first law of thermodynamics for closed systems, first law of thermodynamics for open systems, second law of thermodynamics, entropy, application of the first and second law to the thermodynamic systems.

Page 3 / 25




MAK215 – MATERIALS SCIENCE (4-0) 5

COURSE CONTENT

Identification and grouping of material, Atomic structure, Types of bonds, Crystal structure and properties, Structure imperfections, Deformation of metallic materials, Solidification of metals and diffusion, Phase law and phase diagrams, Phase conversions, Fe-C systems, Heat treatments applied to metal

MAK217– STRENGTH OF MATERİALS I (3-0) 6

COURSE CONTENT

Stress concept. Stress and strain in axial loading. Torsion. Simple bending. Transverse loading. Stress and strain transformations. Design of beams and shafts according to strength. Integration of deflection in beams. Finding the deflection moment in the beams

MAK221 – COMPUTER PROGRAMMING (3-0) 4

COURSE CONTENT

Logic of algorithm and programming, Flow Diagram, Visual Basic.Net programme development media, and programme development with visual programming language.

ORD261 – DIFFERENTIAL EQUATIONS (4-0) 6

COURSE CONTENT

Basic concepts and classifying differential equations, First‐order diffential equations and their engineering applications, Second and higher order differential equations and engineering applications, Power series solutions of linear equations with variable coefficients, Systems of linear differential equations: Scalar and Matrix methods, Laplace trasnformations, Numerical methods for ordinary differential equations.

ATA101 – ATATURK'S PRINCIPLES AND HISTORY OF TURKISH REVOLUTION I (2-0) 2

COURSE CONTENT

Basic political, economic, social and cultural facts of the historical period beginning by the classical age of the Ottoman Empire and ending by the signing of Lausanne Treaty in 1923 - the fundamental academic interpretations on them.

Page 4 / 25




TDİ101 – TURKISH LANGUAGE I (2-0) 2

COURSE CONTENT

Spelling and application; Punctuation and application; General information on composition; Written composition types; Oral composition types.

2nd YEAR SPRING SEMESTER (IV. TERM)

MAK202- DYNAMİCS (3-0) 5

COURSE CONTENT

Introduction to dynamics, displacement, velocity, acceleration, kinematics of particles, relative velocity, centre of gravity and moment of inertia, rectilinear and curvilinear motions of particles, planer motion, kinematics and kinetics of rigid bodies, simple harmonic motion, work and energy, power, impulse and momentum.

MAK220 - STRENGTH OF MATERIALS II (3-0) 6

COURSE CONTENT

Load-bearing relationships in vertical-loaded beams, Analytical method of determination of the pitch, Moment space method, Hyperstatic problems and solutions in bending, Shaping work, Shaping with bends, Calculation of deflection in rods with biaxial axis, Torsion of rot and prismatic rods.

MAK222 – THERMODYNAMİCS II (3-0) 5

COURSE CONTENT

Usability, Irreversibility, II. Legislation, Ideal cycles, Otto-Diesel-Karma cycles, Stirling and Ericsson cycles, Brayton cycle, Rankine cycle, Combined heat Power generation, Refrigeration cycles and heat pumps, Gas mixtures and thermodynamics relations.

MAK224 – NUMERİCAL ANALYSIS (3-0) 5

COURSE CONTENT

Error Analysis, Solution Methods of Nonlinear Equations, Methods of Solution of Linear Equation Teams, Interpolation and Curve Fitting, Numerical Differentiation, Numerical Integration, Numerical Solution Methods of Ordinary Differential Equations

MAK226 – ENGİNEERİNG MATERİALS (3-0) 5

COURSE CONTENT

Classification of engineering materials. Mechanical properties of materials. Static mechanical tests. Hardness testing methods. Experiments to determine fracture toughness. Three-point notched impact tests of samples. Test standards. Reporting of test results. Wrought and cast alloys of iron group. Features. Standards. Thermal processes. Areas of application.

Page 5 / 25




ATA102 – ATATURK'S PRINCIPLES AND HISTORY OF TURKISH REVOLUTION II (2-0) 2

COURSE CONTENT

Political revolutions. Political parties and the trials to transition to multi-party political trials. The revolutions in the field of law. Regulations in the social life. Innovations made in the economic field. Turkish foreign policy between 1923-1938. Turkish foreign policy after Ataturk. Principles of Turkish Revolution, Complementary principles

TDİ102 – TURKISH LANGUAGE II (2-0) 2

COURSE CONTENT

Types of vocabulary in Turkish, Noun and verb conjugation in Turkish, Sentence knowledge, Written Composition types (petition, article, paragraph, essay etc.), Types of oral composition (Symposium, panel, open session etc.), Elimination of narrative and sentence disorders, Development of good speaking and writing ability and related theoretical applications based on sample texts selected from Turkish and world literatures.

3rd YEAR FALL SEMESTER (V. TERM )

MAK300 – INTERNSHİP I (0-0) 2

COURSE CONTENT

Special Regulation

MAK309 – HEATING AND VENTILATION (3-0) 4

COURSE CONTENT

Introduction of heating and ventilating and thermal comfort. Indoor air quality Heating and ventilating system components. Heating systems. Heat isolation. Heat transmission in building structures. Indoor and outdoor design conditions. Heating load. Tube calculation. Ventilating systems. Fans and air distribution. Ventilations cannel design.

MAK311 –STRENGTH OF MATERIALS II (3-0) 4

COURSE CONTENT

Introduction, two and three dimensional stress, principal stress and strain, theories of elastic failure, graphical method (Mohrs circle), elastic deformation (displacement and strain), eccentrically loaded members, members subjected to combined loadings (concentrated load and bending, shear and bending, bending and torsion) , Un-symmetrical bending, deflection ,buckling, stresses in thick cylinders, energy methods.

Page 6 / 25




MAK313 –TRANSPORT TECHNIQUES (3-0) 4

COURSE CONTENT

Introduction to the types of transportation, industrial, material classification, ropes, rope pulleys, rope drums, drive pulleys, chains, chain pulleys, chain drums; Hooks, carrying sleepers, platforms and tables, Brakes, Clutches, Cranes, cranes, elevators; Conveyors, Transmission theory of machines, resistance machines and power transmission account Flexible element drawn; (belt, pallet, oars, bucket conveyors); Amplifiers; Screw; oscillating, vibratory and pneumatic conveyors, lifting machines (cereskallar, hand and electric hoists); of these torque and power calculations, the braking torque calculation, propelled crane, bridge crane.

MAK315 – INSULATİON TECHNİQUES (3-0) 4

COURSE CONTENT

Prevention of insulation. Heat, sound, water and fire insulation. Insulation materials and properties. Heat insulation in buildings and installations. TS 825 Thermal Insulation Regulations for Buildings. Calculation of energy loss calculations in buildings and pipelines.

MAK317 – MANUFACTURİNG PLANNİNG AND CONTROL (3-0) 4

COURSE CONTENT

Contents of this lecture is to sort out solution offers by being investigated detail and advanced topics in manufacturing planning and control systems, approaches which are improved in literature, and problems which are encountered in companies

MAK319 – FINITE ELEMENTS METHOD (3-0) 4

COURSE CONTENT

Introduction to finite element methods, Material and load assumptions, Elements under axial forces, Plane trusses, Elements under shear forces, Elements under bending moment, Plane bending beam, Two dimensional plane finite elements.

MAK321 – ENGINEERING ECONOMY (3-0) 4

COURSE CONTENT

Deciding, balancing cash flow, interest and money value, present value method, annual cost method, internal efficiency rate method, deciding period, money time relations, cash flow analysis after tax, break even point analysis, amortization, inflation effects to cash flows, risk analysis, preparing of feasibility reports.

Page 7 / 25




MAK325- MACHİNE ELEMENTS I (3-0) 4

COURSE CONTENT

Basic concepts, Strength calculation, Dimensioning of working elements under dynamic loads, Shafts and axles, Coupling elements, Shaft-hub connections (wedges, presses), Nut-bolt connections, Unsolvable connections (welding, soldering, gluing, rivet), Elastic connections (springs)

MAK327 - MANUFACTURİNG METHODS I (3-0) 4

COURSE CONTENT

Fundamentals of manufacturing processes and their classification; comparison of manufacturing processes, their superiorities and limits. Design-manufacturing relationship, selection of manufacturing process, plastic forming methods and fields of application.

MAK329 - MECHANISM TECHNIQUE (3-0) 4

COURSE CONTENT

Basic kinematic concepts, classification of mechanisms, finding degree of freedom of mechanisms, four bar linkages, slider crank mechanisms, kinematic analysis of mechanisms, kinematic analysis of gears and cams.

MAK331 - HEAT TRANSFER (4-0) 4

COURSE CONTENT

Introduction of heat transfer, heat conduction rate equations, one dimensional steady-state heat conduction; the plane wall, the cylinder and sphere surfaces. Thermal energy generation. Heat transfer from extended surfaces. Transient conduction. Convection heat transfer; Boundary layer equations, the flat plate in paralel flow, the cylinder in cross flow, internal flow. Free convection. Heat exchangers; Radiation heat transfer; fundamental concepts, radiation between surfaces. Net radiation method.

MAK333 – STATISTICS AND ENGINEERING APPLICATIONS (3-0) 4

COURSE CONTENT

Introduction: Basic concepts of statistics, data collection and editing. Mean, median, peak value, and so on. Measures of Dispersion Range, mean separation, variance, scenes coefficient. Normal and Student-t distribution. Chi-square and F distribution. Interval estimation for population variance and proportion. Hypothesis and Hypothesis Testing Single population mean, variance and proportion for hypothesis testing. Hypothesis: The average of the two stacks, hypothesis testing to compare the variance and proportion. Goodness of fit and independence tests. Correlation: Pearson's correlation coefficient test of the correlation coefficient. Types and simple and multiple regression.

Page 8 / 25




MAK335 - FLUID MECHANICS (4-0) 4

COURSE CONTENT

This course is like the beginning to the fluid mechaniccs for engineering disciplines. Within the scope of the course, conservation laws which are the basis of fluid mechanics are taught. In additon, the use of the conservation laws for the development of methods for analyzing simple flowing systems are mentioned.

MAK337 – PROFESSİONAL PICTURE (3-0) 4

COURSE CONTENT

Drawings of couplings and transmission elements, placing the required markings on drawings, assembly drawings, manufacturing drawings, catalog reading.

3rd YEAR SPRING SEMESTER (VI. TERM)

MAK304 - DYNAMİCS OF MACHİNERY (3-0) 5

COURSE CONTENT

Force analysis of mechanisms: static forces; force analysis in planar mechanisms and force analysis in gears, dynamic force analysis in mechanisms, balancing in machines; static and dynamic imbalance, Equivalent masses, Balancing in crankshaft mechanisms, Balancing in multi-cylinder engines, Rotation irregularity and flywheel, Mechanical vibrations; Single degree of freedom, non-damped, free and forced vibration movements, Vibration isolation, Torsional vibrations.

MAK310 - SYSTEM DYNAMİCS AND CONTROL (3-0) 4

COURSE CONTENT

Introduction to automatic control, Laplace transforms, Mathematical modeling of physical systems and system dynamics, Transfer functions of control systems, System behavior of permanent systems, Permanent behavior and error of control systems, Basic control effects and industrial control systems, Stability of linear feedback systems curves method.

MAK312 – INSTALLATIONS İN BUILDINGS (3-0) 4

COURSE CONTENT

Building installation, clean water installation, fire fighting equipment.

Page 9 / 25




MAK314 – NATURAL GAS INSTALLATİON (3-0) 4

COURSE CONTENT

Fundamentals of natural gas, fundamental rules for building installation, boiler installation, basic calculation for natural gas equipments, ventilating calculations. Selection criteria for LNG, CNG and LPG systems.

MAK316–MECHANICAL VIBRATIONS (3-0) 3

COURSE CONTENT

Mechanical vibrations and basic concepts, Modeling mechanical systems, Single degree of

freedom systems, Two degrees of freedom systems, Multi degrees of freedom systems, Harmonic analiysis, Eigenvalue problem, Control methods of vibration problems (Dynamic vibration absorbers), Vibration isolation, Vibration measurements and related standarts

MAK318 –MANUFACTURING PROCESSES (3-0) 3

COURSE CONTENT

Principles and classification of Manufacturing processes; ads and disads and limitation of each other; Relationship between Desing and Manufacturing; Choosing the correct process. roduction methods (casting, welding, Shaping chipless, Machining methods) Introduce manufacturing tools, principles and classification of Machining methods, factor effects in manufacture and calculating manufacturing times

MAK320 –AUTOMOTIVE ENGINEERING (3-0) 3

COURSE CONTENT

Improvement of vehicles with engine up to nowadays, vehicle design plans, development and manufacturing times, design date plan and principle diagram, vehicle properties and parameters, design analysis via mathematical model, chassis and coachwork design, forces which are affected vehicle, wheel movement equations, construction of brake systems, exhaust emissions in internal combustion engine

MAK322 –OPTIMIZATION TECNIQUES (3-0) 3

COURSE CONTENT

Introduction and basic concepts, Unrestricted optimization. Analytical solution at the Unrestricted optimization, numerical methods and algorithms, Restricted optimization: optimization under the equality restricts, Optimization under the equality and inequality restricts, Optimization under the special restricts. Linear programming (LP) and applications

Page 10 / 25




MAK324 –MANUFACTURING ENGINEERING (3-0) 3

COURSE CONTENT

Definitions and Concepts/ Modern and Classical Manufacturing Systems/ Group Technology/ Computer Aided Process Planning/ Material Requirements Planning/ Flexible Manufacturing Cells and Systems (FMS)/ Computer Integrated Manufacturing Systems (CIM) / Expert Systems, Automated Storage and Retrieval Systems (AS/RS), Handling and Robotic Systems in Manufacturing.

MAK326 –FUNDAMENTALS OF MECHATRONICS (3-0) 4

COURSE CONTENT

Introduction to the concept of mechatronics, mechatronic systems and elements of engineering design principles, synergetic design, design methods, basic system models, programmable controllers, systematic design, mechatronics design project.

MAK328 - MACHINE ELEMENTS II (3-0) 5

COURSE CONTENT

Clutches, Friction and lubrication theory, Tribology, Plain bearings, Rounded Selection of bearings, Gear wheels, Belt-Pulley connections.

MAK330 - MANUFACTURING METHODS II (3-0) 4

COURSE CONTENT

Overview of machine tools and machining methods, the classification methods of casting, casting methods to sand based molds, gravity die casting, pressure casting, centrifugal casting, continuous casting, powder metallurgy, classification of welding methods, weldability, gas welding, methods of arc welding, cast welding, electroslag welding, methods of beam welding, electric resistance welding, friction welding, methods of thermic cutting.

MAK332 - BASİCS OF ELECTRİCİTY AND ELECTRONİCS (3-0) 4 AKTS

COURSE CONTENT

Direct current circuits, Ohm and Kirchoff's laws, Circuit solution methods, Alternating current circuits and conductor calculations in alternating current circuits, Principles of electricity, Conductivity and semiconductor, Diodes and transistors.

MAK334 –SOLID MODELLING (3-0) 4

COURSE CONTENT

CAD/CAM/CAE/CE, computer-aided mechanical design process, draft drawing limitations, solid modeling methods, Assembly Modeling, Curve Modeling Essentials, manufacturing and design for assembly, Surface modelling, Design for manufacturing and assembly, Inverse engineering, Six-sigma design, Experiment design.

Page 11 / 25




4th YEAR FALL SEMESTER (VII. TERM )

MAK400 – INTERNSHİP I (0-0) 2

COURSE CONTENT

Special Regulation

MAK405 –COMPUTER AIDED MANUFACTURING (3-0) 3 COURSE CONTENT Hardware and software for Computer Aided Manufacturing (CAM) and their properties, computer aided techniques and CAM, numerical controlled machine tools, manufacturing systems and CAM, modeling with CAD/CAM programs, selection of process parameters and tooling, tool paths and tool paths generation algorithms, machining strategies, post processor and graphical simulation of machining

MAK407 –CASTING TECHNOLOGY (3-0) 4

COURSE CONTENT

Basis of Casting Process and Casting Methods, High Pressure Die Casting and Types, High Pressure Die Casting Machines and Automation, High Pressure Die Casting Molds, Die Casting Molds Dimensioning, Mold Components, Mold Materials, Cooling of the Molds, Die Casting Alloys, Melting Furnaces, Die Casting Defects and Prevention Remedies, Developments in Die Casting.

MAK409 –ELEKTRICAL MACHINERY (3-0) 4

COURSE CONTENT

Magnetic circuits and systems, Basic principles of transformers, Impedance transfer, Single phase transformers, Three phase transformers, Auto transformers and Equivalent circuits of transformers, Power factor and voltage regulation, Electromechanical Energy conversion, Coenergy, Field energy and rotary machines, Cylindrical machines, Principles of DC machines, Equivalent circuits of DC machines, DC generators and DC Motors, speed control techniques and applications of DC motors, Introduction to AC machines.

MAK411 –SOLAR ENERGY (3-0) 4

COURSE CONTENT

Classification of solar energy, calculations of basic and derived solar winds, calculation of solar radiation, calculation of instantaneous and daily average solar radiation, planar, vacuum tube and condensing solar systems, energy storage, solar energy hot water systems, solar batteries and other applications of solar energy.

Page 12 / 25




MAK413 –COMPOSITE MATERIALS (3-0) 4

COURSE CONTENT

History of Composites, Composite and Alloy Concepts, Metal Matrix Composite Materials, Polymer Matrix Composite Materials, Ceramic and Glass-Based Composite Materials, Carbon Carbon Composites, Nano Composites, Mechanisms to Increase Strength in Composite Materials, Basic Strength and Elastic Analysis Methods for Composites, Mechanisms to Increase Toughness in Ceramic Composites, Aerospace, Automotive and Structural Applications of Composites, Composites for Future Applications.

MAK415 –COOLING TECHNIQUES (3-0) 4

COURSE CONTENT

Fundamentals of cooling, P-h diagrams, Cooling cycles, cooling circuits elements (compressors, condensers, cooling towers, expansion valves, evaporators), Isolation, cooling fluids, calculation of cooling load, application on a model

MAK417 –FRACTURE MECHANICS (3-0) 4

COURSE CONTENT

Stress concentrations, stresses and deformations at fracture ends, critical stress intensity coefficient, Griffits theory. ASTM E399 Standards developed on fracture toughness of the material. Alternative methods to obtain fracture toughness of structural steels. Obtaining a graph of dependence of temperature from fracture toughness for a given steel. Materials behaviors under stress, deformation and fracture, types of fracture, factors affecting on fracture, fracture mechanics, fracture and failure, failure analysis, case study.

MAK419 –HYDRAULICS PNEUMATICS SYSTEMS (3-0) 4

COURSE CONTENT

Fundamental of Hydraulics, Hydraulics Fluids and their specifications, hydraulics cylinders, pumps: types and calculations, valves, hydraulics systems design, basic concepts of Pneumatic, pneumatic valves, pneumatic circuits and systems, pneumatic control systems.

MAK421 –ENERGY ENGINEERING (3-0) 4

COURSE CONTENT

Turkey's overall energy situation, Turkey's industrial structure, energy efficiency and management concepts; Gold elements of energy management systems, fuels and practical aspects of combustion, introduction to steam systems and energy saving ways, total steam system efficiency, steam boilers and efficiency calculations; Mass and energy balances; Drying Systems energy analysis; Utilization of waste heat; Energy efficiency in refrigeration systems; Cogeneration and trigeneration; The way to achieve the energy efficiency of electrical systems; Heat insulation, calculation of thermal insulation of valves and flanges; Economic analysis methods; The way to achieve energy efficiency in the plants.

Page 13 / 25




MAK423 – MACHINING THEORY AND MACHINE TOOLS (3-0) 3

COURSE CONTENT

Theory of Ernst and Merchant. Friction, tool geometry and chip breakers. Friction, tool geometry and chip breakers. Types of wear in cutting operations, tool life. Machining costs. Surface roughness, cutting fluids. Cutting Temperature. Turning lathes. Drilling operations and finishing operations. Shaper, planning machine and milling machine. Finishing operations.

MAK425 RENEWABLE ENERGY SOURCES (3-0) 4

COURSE CONTENT

Solar energy, Wind energy, hydraulic energy and water resources, Wave energy and biological fuels as a primary energy resource to convert in electrical energy or for heat generating. In this context the application techniques and the calculating methods will be learned.

MAK427 TECHNICAL ENGLISH (3-0) 4

COURSE CONTENT

Basic grammar laws of English, Terms in english about mechanical engineering, Translation to Turkish from English, Translation to English from Turkish.

MAK429 –MODELLING AND ANALYSIS OF DYNAMIC SYSTEMS (3-0) 4

COURSE CONTENT

Formulation of systems model and similarity in engineering, Dynamics of mechanical systems, Dynamics of electrical systems, Dynamics of electromechanical systems, Dynamics of fluid and thermal systems, Investigation and analysis of behaviors of dynamic systems in time space, Investigation and analysis of behaviors of dynamic systems in frequency space.

MAK431 WELDING TECHNIQUE (3-0) 4

COURSE CONTENT

Introducing the modern welding methods and comparing them, selection of welding method, determining the application criteria of welding for design and manufacturing, gathering information about the modern welding methods that are used in industry.

MAK 433 METAL FORMING (3-0) 4

COURSE CONTENT

Fundamentals of Plastic Forming technology: Forging, Rolling, Extrusion, Wire-rod-pipe drawing, Cutting, Bending, deep Drawing and other sheet forming methods.

Page 14 / 25




MAK435 NONTRADITIONAL MANUFACTURING PROCESSES (3-0) 4

COURSE CONTENT

Unconventional methods of manufacturing, electricity, lasers and chemical processing and forming, plastic deformation at high speeds, magnetic forming, water jet machining.

MAK437 –CONSTRUCTION TECHNIQUE (3-0) 4

COURSE CONTENT

Introduction, Idea of a Product, Design improvement processes, Analysis of duty, Demand types, Functional synthesis, Function structures, Elementary function.

MAK439 FUELS AND COMBUSTION (3-0) 4

COURSE CONTENT

Occurance of fossil fuels and properties. Fuel analysis and thermal values. Basic concepts of combustion. Continuous and non-continuous flow combustion. Mechanisms of ignition and fuel-air mixtures. Combustion reactions, chemical equilibrium and reaction velocities. Combustion calculations. Systems of preparing of fuel and its functions. Flame systems and classifications. Flame systems with grid, fluidized bed and burners. Thermak performance and emission behaviour of flame systems. Design of a flame system and combustion chamber.

MAK441 –MECHATRONICS SYSTEM DESIGN (3-0) 4

COURSE CONTENT

Signal conditioning, Wheatstone bridge and etc., Actuators and drives, closed loop controllers, microprocessors, input-output systems.

MAK443 DESIGN OF MOTOR AND DRIVE SYSTEMS (3-0) 4

COURSE CONTENT

Drive system structures, Mechanical Loads and System Models, Converters, Power Electronics, Controller Design, Feedback Control, The Structure and Operating Principles of DC Machines, DC Drives, Various Operating Modes in DC motor Drives, Induction Machines, The Operation of Induction Motor, Line Start and Soft Start of Induction Motors, Induction Machine Drives And Speed Control Of Induction Motor Drives, Torque, Speed and Position Control, Understand stepper-motor and reluctance drives, Modeling with Simulink.

MAK445 QUALITY MANAGEMENT (3-0) 4

COURSE CONTENT

Quality and relevant definition. Comparision of quality approach. Quality gurus. Quality management. Customer focus. Employee involvement. Supplier quality management. Leadership. Process management. System approach. Decision making based on data. Quality culture Lecturing. Employee responsibility. Case study.

Page 15 / 25




MAK447 – DESİGN (2-2) 4

COURSE CONTENT

Determining the subject of research project; Sub-topics covered by the research study; Literatur review; Organization of studies conducted on the subject; Necessary studies; Required analysis of the accounts and making; Analysis of the evaluation; Results evaluation; Writing project.

MAK448- MEASUREMENT TECHNIQUE (3-0) 4

COURSE CONTENT

Introduction to Measurement Techniques and Definitions / Metrology and Calibration / Introduce to Turkish Standards Related with Measurement Techniques; Other Foreign Standards, Norms and Rules/Analyzing Experimental Results /Measuring of Macro and Micro Geometry/ Measuring of Dimension, Angle and Area/ Measuring of Pressure / Measuring of Temperature / Measuring of Flow Rate / Measuring of Level / Measuring of Thermo physical Characteristics / Measuring of Force, Moment and Power of Shaft / Sensors and Basic Physical Characteristics of Sensors / Electrical Measurements in Mechanical Engineering / Sampling and Measuring of Air Pollution.

MAK451 ENERGY CONVERSION (3-0) 4

COURSE CONTENT

Steam power plants of thermal power systems used in energy conversion , gas turbines, jet engines and the understanding of the internal combustion engine and examining the costs associated with this account in the application system.

MAK453 STEAM BOILERS (3-0) 4

COURSE CONTENT

Thermal losses, types of steam boilers and technical values, determination of furnace sizes, getting of furnace temperature, calculation of heat surfaces, calculation of superheater, economiser and recuperater surfaces, calculation of losses of head. Teaching of steam boiler materials.

MAK455 HEAT PUMPS (3-0) 4

COURSE CONTENT

Principles of thermodynamic analysis and heat pump, heat pump types, elements of the heat pump system, throttle bodies and fittings, types and properties of refrigerants, Design of heat pumps, residential and industrial applications of heat pump

Page 16 / 25




MUH401 ENTREPRENEURSHIP (4-0) 4

COURSE CONTENT

Basic concepts, features, culture, types, financing of entrepreneurship. Required skills for entrepreneurship, entrepreneurship of women. Family companies, organizational culture. Business plan concept and components. Description, features and types of project. Project management and organization. Logical framework approach. Project life cycle, control and monitoring. Developing project budget. Project funding.

MUH403 ENGINEERING MANAGEMENT (2-0) 4

COURSE CONTENT

Management process definition; Modern and classical administrative behavior; Basic economic information; The concept of cost; Directed managed relationships; Necessary for the administrator to budget, balance sheet; Depreciation of vehicles, such as the definition and evaluation; Optimization concept

MUH405 CIVIL SOCIETY ORGANIZATIONS (2-0) 4

COURSE CONTENT

Democracy, attendance, voluntariness and social society terms; Non governmental organisations in world; Non governmental organisations in Turkey; Meaning of non governmental organisations; Functions of non governmental organisations; NGO and social services; NGO and sector relationship.

MUH 407 ETHICS AND MORALITY (2-0) 4

COURSE CONTENT

Ethics and Morality, Work Ethics, Business Ethics Concepts. Business ethics concept and approaches. Relationship between ethics and economics. Ethics in Public Administration. Ethics in different cultures. Unethical Behaviours and Practices at Work -Psychological Harassment, Sexual Harassment, Discrimination. Unethical Behaviours and Practices at Work Theft and Bribery, Corruption and Tax Evasion. Concepts and Approaches to Social Responsibility. Social Responsibilities of institutions-Health, Safety. Social Responsibilities of institutions-Sustainability and Environment. Social Responsibilities of institutions-Social Problems. Responsibilities and sheltered workplaces for disabled. Social Responsibility Projects in the Public Sector and the Private Sector. MUH 409 KPSS EDUCATİON (2-0) 4

COURSE CONTENT

Turkish (Vocabulary knowledge, Grammar); Turkish (Expression properties); Turkish (Reading comprehension); Mathematics (To operate with numbers); Mathematics (Benefit from math relationship); Mathematics (Problem solving); Mathematics (Basic geometry, Interpreting tables and graphs); History (Anatolian Seljuk Empire and before Turkish States, Ottoman Empire); History (Ataturk’s principles and revolutions, Modern Turkish and World History); Geography (Turkey’s physical features); Geography (Turkey’s human and economic features); Basic Civics (Inception of law and general public law); Basic Civics ( Constitution, Administration); Current issues.

Page 17 / 25




MUH 411 FACTORY PLANNİNG (2-0) 4

COURSE CONTENT

Management and definition of manager, planning, control, production scheduling, human resource management, production planning, making production flexible, inventory management, risk analysis, meting the customer demands, implementation of lean manufacturing systems, benefit-cost analysis, reviewing the purchasing activities, preventing employees spend unproductive time, training activities, maintenance activities.

MUH 413 PUBLİC RELATİONS (2-0) 4

COURSE CONTENT

Definition of Public Relations (PR), communication process, Historical development of PR in Turkey and World, public relations practices and Creativity

MUH 415 HİSTORY OF MACHİNE TECHNOLOGY (2-0) 4

COURSE CONTENT

Anonymous developments on machines, Chinese Inventions and Machines, Mechanical Engineering in Antiquity, Medieval Machines and Mechanisms, The Machine Renaissance, Machines in the First Colonial Empires, Machinery During the Industrial Revolution

MUH417 PHOTOGRAPHY (2-0) 4

COURSE CONTENT

Basic components of the camera, Usage of iris diaphragm, Usage of snapshot, Lenses and their equipment, Using the light, Exposing, Measuring the income and reflected light

MUH 419 SCIENCE PHILOSOPHY (2-0) 4

COURSE CONTENT

Philosophy of science, asking questions about science, philosophy upon information makes. The structure of science, nature, scientific theories and methods in science and the problem of the relationship between reality takes over. In the 19th and 20th century science to provide extraordinary success, greatly increased the interest in him; This interest, which is the science of what people think, what to look for some criteria as to whether science and science has led to questioning. As a result, science, philosophy has been one of the topics.

Page 18 / 25




MUH423 EXCEL APPLICATIONS IN ENGINEERING (4-0) AKTS

COURSE CONTENT

Introduction, spreadsheets, introduction of MS-Excel, summary table in MS-Excel, operations with target search and decoding, validation, sharing of Excel data with other programs, writing macro and small programs in macro with macro.

MUH421 –PATENT EDUCATION (2-0) 2

COURSE CONTENT

Ways of get a patent, Necessities of transforming of an idea to a patent, Patent types, Patent processes

4th YEAR SPRING SEMESTER (VIII. TERM)

MAK406 PHASE DIAGRAMS (3-0) 4

COURSE CONTENT

Basic concepts, Gibbs phase rule, unary system-phase diagram of water, binary systems, isomorphous, eutectic, eutectoid, peritectic reactions, Fe-C equilibrium diagram; ternary systems, application of SiO2-CaO-Al2O3 system.

MAK408 FUNDAMENTALS OF AIR CONDITIONING (3-0) 4

COURSE CONTENT

The basic concepts of air conditioning, practice fields, classification of air-conditioning systems, sources of heat load, comfort conditions, psychrometrics, air conditioning of the summer and winter.

MAK410 HYDRAULIC MACHINES (3-0) 4

COURSE CONTENT

Theory of hydraulic machines, principles and application areas, Definitions, Characteristic curves, Types, Constructive properties, Cavitation, General and basic design principles, operating principles

MAK412 CORROSION (3-0) 4

COURSE CONTENT

Fundamentals of corrosion, Metallurgy, Metallic corrosion in various environments, Potential-pH diagrams, Passivity, Corrosion by hydrogen output and oxygen reduction, Some Important examples of electrochemical corrosion, Examples of corrosion where mechanical factors are effective, Corrosion protection, Corrosion testing methods.

Page 19 / 25




MAK414 DRYING TECHNIQUES (3-0) 4

COURSE CONTENT

Drying technique processes. In drying process, heat transfer to evaporate moisture. Flow properties which effect heat and mass transfer. Describing the moisture content of materials, types of moisture-solid relationships, air humidity, sorption isotherms and using heat and mass balance on the drying process and determining the drying process.

MAK416 ENGINE DYNAMICS (3-0) 4

COURSE CONTENT

Piston engine kinematics, crank angle of the piston relative path, speed and acceleration, calculating piston displacement, speed and acceleration, graphics, sample solutions mass reduction, static and dynamic equivalence, inertia forces, superposition describe the making motor acting on the rotating and translational makes mass belonging to inertial forces, gas forces and moments calculations, sample solutions Motor rotating force and torque of the crank angle change, flywheel stored energy flywheel account, diroskopik forces, inertia forces, sample solutions in the motor need to be balanced forces and moments, static and dynamic balance, 1 and 2nd degree inertial forces and moments, the engine forces and moments affecting the balance of the graphic method and analytic analysis of different types of single and multi-cylinder engine balancing.

MAK418 POWDER METALLURGY (3-0) 4

COURSE CONTENT

Parts produced with Powder Metallurgy (PM) and Particulate Materials Processing Technology (PMT) and compare them with other methods of materials` production. Powder production techniques for commonly used powders and their technological importance. Comparison of the parts of the same element or alloy being produced via different powder production technologies. Powder shaping and sintering.

MAK420 –FACILITY ENGINEERING (3-0) 4

COURSE CONTENT

Heating systems, heating load, warm water and steam heating system calculations. Basic principles of ventilating refrigeration system vapor refrigerating cycles and refrigerants, Thermodynamics properties of moist air. Psychometric chart and elementary psychometric processes. Psychometric direct contact transfer processes between moist air water and design of air washer, cooling tower, cooling and dehumidification of moist air around the cooling coils, comfort chart, cooling load and summer air conditioning system calculations.

MAK426 –COMPUTER AIDED DESIGN OF MECHANICAL SYSTEMS (3-0) 4

COURSE CONTENT

Solid Modeling, engineering analysis, FEA, Finite Element Modeling Strategies, Linear Dinamic Analiysis, Linear Buckling Analysis, Termal Analysis, Design Optimization.

Page 20 / 25




MAK430 –VEHICLE TECHNIQUE (3-0) 4

COURSE CONTENT

The concept of motor vehicle. Transmission Systems. Steering Wheel equipment, diagonal motion and cruising Dynamics. Motion resistance and equations: Motion limitations, Air resistance, acceleration resistance and power, road-vehicle aerodynamics, aerodynamic forces, air flow systems, centrifugal and Rolling moments, aerodynamic resistance, resistance power, linear vehicle motion, vehicle propulsion characteristics, maximum propulsion force, vehicle acceleration capability, acceleration limit, cornering balance, braking mechanics, brake and brake equipments, tyres, road-tyre relation, braking load transfer.

MAK432 –CNC PROGRAMMING (3-0) 4

COURSE CONTENT

1- CNC milling, lathe features, sections and working principles. 2- Bench coordinate axes, the reference points. The control panel types. Relationship between the cutter and workpiece material. 3- Breaker types, properties and uses of areas. 4- Parts of the zero points. Cutting depth, angle, and advances in the process giving. 5- CNC milling machines programming principles. 6-Motion systems, CNC milling machines. 7- The definition and importance of simulation. Simulation programs. Running the program. 8- CNC milling machine using the programming cycles. Rectangular pocket milling cycle. 9- CNC milling machine using the programming cycles.Circular pocket milling cycle. 10- CNC milling machine using the programming cycles. a) Hole drilling cycle. b) The tapping cycle. c) Hole expansion cycle. 11- Sub-programming technique. Sub-programming structure. 12- CNC milling machine programming using subprogram. 13- Alarm options with CNC milling machines. 14- Measurement and control.

MAK434 –ROBOTS (3-0) 4

COURSE CONTENT

Definition of robots and types, mechanical elements of robots, driving gear mechanisms, robot sensors, kinematic and kinetic analysis of motion of robotic arm, programming of robots.

MAK436 –TRANSPORT MACHINES (3-0) 4

COURSE CONTENT

Introduction to the types of transportation, industrial, material classification, ropes, rope pulleys, rope drums, drive pulleys, chains, chain pulleys, chain drums; Hooks, carrying sleepers, platforms and tables, Brakes, Clutches, Cranes, cranes, elevators; Conveyors, Transmission theory of machines, resistance machines and power transmission account Flexible element drawn; (belt, pallet, oars, bucket conveyors); Amplifiers; Screw; oscillating, vibratory and pneumatic conveyors, lifting machines (hand and electric hoists); of these torque and power calculations, the braking torque calculation, propelled crane, bridge crane.

MAK438 –PIPELINE ENGINEERING (3-0) 4

COURSE CONTENT

Installation and designing of pipelines, material selection for pipelines and installation calculation of pipelines.

Page 21 / 25




MAK440 –DIE DESIGN AND MANUFACTURING (3-0) 4

COURSE CONTENT

Principles of Forming in Die / Die Types / Forging Dies / Sheet Metal Forming Dies / Plastic Injection Dies / Part, Die and Die Component Design / Die Materials / Manufacturing of Dies / Tolerances / Finishing Process / Reverse Engineering in Die Manufacturing and Quality Control.

MAK442– NANOTECHNOLOGY AND APPLİCATİONS (3-0) 4

COURSE CONTENT

Nanostructures, Solid State Physics and an overview of surface science, crystals and atomic processes in the growth of thin films, 2-D Nanostructures, Applications of Nanomaterials.

MAK444 –COMPUTATIONAL FLUID DYNAMICS (3-0) 4

COURSE CONTENT

Introduction and basic definitions, Review of the fundamental equations and related boundary conditions, Solution of IVPs and BVPs, Thomas algorithm, Mathematical behavior of PDEs, Vorticity-stream function relations, Turbulence models, Finite difference method (FDM), Explicit and implicit methods, Finite volume method, Solution schemes: SIMPLE, SIMPLER, SIMPLEC, PISO.

MAK448- MACHINE LABORATORY (0-2) 2

COURSE CONTENT

Description of every major branch of theoretical issues related to some courses have taken place to experiment, data retrieval, data processing, results and discussion, practical application of the theoretical foundations of analysis.

MAK450 ENGINES (3-0) 4

COURSE CONTENT

Thermodynamic cycle analysis of gas exchange, compression, expansion and combustion processes with dissociation. Mechanism of combustion. Fuel and additive characteristics. Real cycles. Performance characteristics. Brief analysis of the fuel metering and ignition systems, exhaust emissions and control systems, heat transfer, friction and lubrication systems.

MAK452 –TRİBOLOGY (3-0) 4

COURSE CONTENT

Dry Friction, Friction Theory, Wear and Wear Mechanisms, Wear Control, Lubrication, Lubricants, Stribeck curves, wear-Effect of Surface Treatments, Bedding Materials.

Page 22 / 25




MAK454 –WIND ENERGY(3-0) 4

COURSE CONTENT

Wind Energy Input / wind speed-power relationship / wind towed Maximum Power-Betz Limit / Wind Speed Distribution / Weibull Probability Density Function / Wind Speed Statistics / Wind Power Distribution / Power Act-Hellmann Coefficient Electric Generators / Wind Power Conversion Systems / Turbine Wing design / Variable Speed Wind Turbines / Fixed Speed Wind Turbines / Synchronous-asynchronous Wind Turbines / Wind Turbine System Power Control / Wind Energy Systems, Mathematical Modelling and Simulation / Independent Wind Energy Systems / grid connected Wind Power Systems / Wind Energy Systems Analysis in Life.

MAK456 –ENERGY MANAGEMENT (3-0) 4

COURSE CONTENT

General Structure of the Turkish Industry / Energy Consumption of Processes / Energy Management Principles / Energy Savings Study Methods / Energy Accounting / Measurement, Instrumentation and Process Control / Energy and Mass Balances / Combustion Systems of Boiler Houses / Calculation of Boiler Efficiency / Steam Generation and Distribution Systems / Insulation / Ovens / Heating, Ventilation and Air Conditioning Systems / Drying Processes / Waste Heat and Environmental Impact / Solar Energy and Heat Pump Systems / Combined Heat and Power Systems.

MAK458 –HEAT EXCHANGER (3-0) 4

COURSE CONTENT

Two-phase Flows, Evaporation, Condensation, Heat Transfer from Extended Surfaces, Finned Surface Heat Exchangers, Evaporation, Condensation Calculations of heat exchangers, NTU Method, Shell and Tube Heat Exchangers, Plate Heat Exchangers, Exercises and Applications.

MAK459 - GRADUATION THESIS (0-2) 4

COURSE CONTENT

Determination of the finishing work, Literature study, Source selection, Data creation, Arrangement of the study, Creation of the final version of the study, Presentation of the study.

MUH 402 ENVIRONMENT AND ENERGY (2-0) 4

COURSE CONTENT

Introduction, Energy Sources, Petroleum, Electrical energy and nuclear energy, Energy policies of Turkey and natural gas, Consciousness of environment, Environment problems of 21st century, Wastes, Contamination Trade, Energy situation of upcoming 10-50 years and alternates, Global warming, Global security and radioactivity.

Page 23 / 25




MUH404 BUSINESS LAW (2-0) 4

COURSE CONTENT

Concept of labor law and subject; Business law resources; Personal business relationships; Working order; The labor law no 4857; Type of labor contract and termination; Occupational health and safety; Finding job and worker; Control of working life; General health insurance law; Law on trade unions; Collective labour agreements; The law strike and lockout.

MUH406 OCCUPATIONAL HEALTH AND SAFETY (2-0) 4

COURSE CONTENT

Theoretical framework of occupational health and safety (OHS), national and international standards of the OHS; causes and effects of occupational accidents and illnesses and basic courses about preventive practices, basic legal arrangements on OHS law in Turkey, case studies and civil jurisdictions of Court of Appeals, analysis of the occupational accidents in shipyard industry.

MUH408 SPOR INJURIES AND FIRST AID (2-0) 4

COURSE CONTENT

Terminology; Push reasons injured to athletes; Prevention of sports injuries; The importance of first aid, the objectives and basic rules; First aiders, first aid supplies, transportation of injured; Hemorrhages; Cardiac massage techniques, artificial respiration methods; Fractures, dislocations, sprains, muscle injuries and first aid; Cramps, first aid for hot and heatstroke; Winding and bandages technique; First aif for burns, frostbite and poisoning; Conservative treatment principles of sports injuries; Rest, elevation, cold treatment, bandage treatment, heat treatment; Massage and exercise therapy in sports injuries.

MUH 410 MANAGEMENT INFORMATION SYSTEMS (2-0) 4

COURSE CONTENT

Management, basic concepts on information and system; Information system development tools; Computer aided information systems; System analysis and design; Database management system; E- commerce.

MUH412 SYSTEM ANALYSIS AND DESIGN (2-0) 4

COURSE CONTENT

System Concept and General System Theory, Information System and Information System Types, Information System Development Process, System Analyst Duties and Capabilities, Preliminary Investigation and Feasibility Analysis, System Proposal Preparation and Presentation, Systems Analysis, Systems Design, Systems Implementation, New System to Handle Process

Page 24 / 25




MUH 416 GRAPHİC DESIGN (2-0) 4

COURSE CONTENT

Typography. Logo Design. Illustration. Cartoon. Screen Printing. Etching. Lithography. Packaging Design. Stand Design. Web Design. Interface Design. Interactive Design. 3D Animation Design. Corporate Identity Design.

MUH418 ART HISTORY (2-0) 4

COURSE CONTENT

Examining the concepts of art in the scope of the relation of culture, art and society parallel to their periodical and stylistic characteristics.

MUH420 MARKETING (2-0) 4

COURSE CONTENT

Business objectives by providing to comply with changes to the development of ideas, goods, pricing, and distribution-related planning and implementation process to hold that contains all of the market and marketing information.

MUH 428 SOCIAL RESPONSIBILITY (2-0) 4

COURSE CONTENT

Basic concepts related to community and public service applications, and social responsibility projects. The importance of the community service and social responsibility projects. identify the audiences problem. Produce solutions for the identified problems.

Page 25 / 25



Documents

Bartın University Faculty of Engineering Mechanical