Upload
john-mcclane
View
220
Download
0
Embed Size (px)
Citation preview
7/28/2019 EMSEAL_FS110_ProductData
1/2
www.emseal.com
MIGUTRANS FS 110/...
Interior Joint Index A/E Application Index Literature & MSDS REP/Distributor Finder
Project Profiles CAD Details AIA/CES Home Company Profile Contact Us
Last modified: May 19, 2005
Founded 1959. In North America since 1979. (Need help with Floor ExpansionJoints? Fax Us This Checklist)
JOINT SELECTION:To select a joint for lastingfunction in your applicationfirst calculate anticipatedLOAD, MOVEMENT, andJOINT-GAP SIZE, then askand answer the followingquestions:
1) Can this model handle theloads from my expectedtraffic?2) Can this model handle the
expected movement?3) Will this model straddlemy designed joint-gap?
If you answer "NO" to any ofthe questions move to thenext model. When you cananswer "YES" to all threequestions you have probablyfound your joint system.
Need Help or confirmation ofyour selection? FILL IN andFAX US THIS CHECKLIST.
DESIGN FOR
DURABILITY:
Point loads are the numberone killer of interior floorexpansion joints andsurrounding flooringmaterials.
"Rubber-and-rail" systemsdon't last. Cover-plates andlightly-constructed"centering-bar and plate"systems create slip, trip andnoise hazards.
EMSEAL is proud to offer aunique line of elegant, well-engineered floor expansion
joint systems.
The superior design of theMIGUTRANS serieseliminates dangerous, noisy,and unsightly jointdeterioration as well as thedisruption and expense ofreplacing failed systems.
For joint sizes up to 3-inches (75 mm)
in floors where high point loads are expected:
z Fork Liftsz
Trucksz Scissor Liftsz Gurneys
z Coin Cartsz
Luggage Cartsz Hand Trucksz Pedestrians
z Mobile Medical Equipmentz
Emergency Vehiclesz Vendor Cartsz Maintenance Equipment
DIMENSIONS and MOVEMENT CAPABILITY:
Joint Size Movement CapabilityVisibleWidth
Up to* mean joint size of:
3"(75mm)
*For example: Can be used to
straddle mean joint sizes of1", 2"or 3" (25, 50 or 75mm)
1 1/4"(30 mm)
+5/8" and - 5/8"(+15mm and -15 mm)
from mean-To midpoint of movement range
4 3/8"(110mm)
LOAD CAPACITY
Load per axle fortrucks with pneumatic tires:
Load per axle for forklifts with pneumaticor solid, soft-rubber tires:
Load per axle for equipment witsolid, hard-plastic tires:
22,500 lbs10,200 kg
100 kN
15,700 lbs7,138 kg
70 kN
NOTE: Because a fork lift load is carriedalmost entirely on the front axle, this can
also be considered the gross, loadedvehicle weight.
365 lbs/inch width of tir6.5 kg/mm
63.7 N/mm
NOTE: Multiply total width of alltires on axle by above value to g
total load capacity.
For assistance in calculating wheel loads of expected vehicles--Consult EMSEAL
EMSEAL FS 110 Product Data, 5/20/2005, Page 1 of 2
7/28/2019 EMSEAL_FS110_ProductData
2/2
The complete line of optionscaters to a variety of designconditions in both new andretrofit construction. Wheeland axle load ratings ensuresuitability for use byeverything from coin cartsand mobile medicalequipment to the heaviestforklifts and other materials
handling equipment.
Make MIGUTRANS theBasis of Design for yourfloors. Go to theMIGUTRANS HIGH-POINT-
LOAD JOINT index at
emseal.com.
ADVANTAGES:
-Long lasting, maintenance-free, all-metal, aircraft-aluminum construction
(Alloy 6061-AlMgSi)*
-ADA compliant
-Fire-rating achievablethrough addition of fire caulkor blanket--Consult EMSEAL
-Ribbed, no-skid surface
-Smooth, no-bump trafficsurface at any opening stateof the joint
-Grooveless, dirt-freesurface
-Three-way movementcapability
*Alloy 6061, AlMgSi
(aluminum, magnesium,silicon), a cold finishedaluminum wrought product, is
offered for use in applicationsrequiring excellent corrosionresistance and anodizingresponse, good workability,
excellent joiningcharacteristics, and goodacceptance of appliedcoatings. Some applicationsinclude impact stock for low
pressure ammunition andaerospace connectors.
Floor-to-Wall Version (E-4) Floor-to-Wall Version (E-3)
LEG-HEIGHT OPTIONS & INSTALLATION DIMENSIONS:
Model #: Leg Height Floor-To-WallOptions
ProductionLength
OverallWidth
InstallationHeight
Blockout Width
FS 110/3000 1 1/4"(30mm)
E-4(wall flangeturned up)
E-3 (wall flange
turned down)13.12'
(4 m)9"
(230mm)
Finished
floor level =Leg Height+ 1/4-inch(6mm) for
epoxy-mortarsetting-bed
For retrofit or solid
slab installations,Blockout recesswidth will varydepending on
joint-gap size--Consult EMSEAL
FS 110/4200 1 5/8"(42mm)
FS 110/5200 2"(52mm)
FS 110/6200 2 1/2"(62mm)
FS 110/7700 3"(77mm)
FS 110/8700
3 1/2"
(87mm)
FS 110/9700 3 7/8"(97mm)
--"Interior-Floor Expansion Joint Checklist"--
--EMSEAL_FS110_ProductData (.pdf)--(printable version of this web page)
--Link to CAD Details (.dwg)--
--GuideSpec-05800-Floor&Wall (.htm)--
--GuideSpec-05800-Floor&Wall (.doc)--
FS 110 virtually disappears in granite airport floor.(Click image to enlarge)
Copyright 1998-2005 by EMSEALCORPORATION All rights reserved.This document may not be reproduced in wholeor in part without permission.Last modified: May 09, 2005
Interior Joint Index A/E Application Index Literature & MSDS REP/Distributor Finder
Project Profiles CAD Details AIA/CES Home Company Profile Contact Us
Phone/Fax: Email/Electronic
TOLL FREE USA & CANADA: 800-526-8365Phone: 508-836-0280 Fax: 508-836-0281
or [email protected] use our Feedback Form
EMSEAL FS 110 Product Data, 5/20/2005, Page 2 of 2