Upload
cyndi
View
26
Download
5
Embed Size (px)
DESCRIPTION
The engineering equipment and systems for NICA. International Workshop NICA-SPIN 2013 JINR, Dubna, Russia, March 17 - 19, 2013 March 18, Monday N.Topilin. - PowerPoint PPT Presentation
Citation preview
04/20/23 N.Topilin, JINR
The engineering equipment and systems for NICA
International Workshop NICA-SPIN 2013JINR, Dubna, Russia, March 17 - 19, 2013
March 18, Monday
N.Topilin
04/20/23 N.Topilin, JINR
Гигиенические требования к организации технологических процессов,производственному оборудованию и рабочему инструменту
Санитарно-эпидемиологические правилаСП 2.2.2.1327-03
Дата введения: 25 июня 2003 г.1
04/20/23 N.Topilin, JINR
Standard lifting tool
04/20/23 N.Topilin, JINR
Good floor – 50% of success
04/20/23 N.Topilin, JINR
Pneumatic tool (Genie Super Hoist)GH™-3.8• 3.80 m lifting height• 136 kg load capacityGH-5.6• 5.60 m lifting height• 113 kg load capacity
Drill machine on magnetic base
04/20/23 N.Topilin, JINR
Booster tunnel cross-section
04/20/23 N.Topilin, JINR
Collider tunnel cross-section
04/20/23 N.Topilin, JINR
Controlled Tightening Tool
04/20/23 N.Topilin, JINR
Controlled Tightening Tool
1410 Nm
04/20/23 N.Topilin, JINR
Useful tool
04/20/23 N.Topilin, JINR
Heavy disk handling (Chamber f.e.)
04/20/23 N.Topilin, JINR
Manipulator
• This Tool was used at CERN in 2002-2006 years during ATLAS Tilecal assembly
• The great idea to use it for MPD magnet assembly and other similar objects :
• • The Chain speed is 0.5 or 1.0 cm per sec
04/20/23 N.Topilin, JINR
Manipulator using examples
04/20/23 N.Topilin, JINR
MPD Magnet assembly with Manipulator
04/20/23 N.Topilin, JINR
MPD Hall plane
04/20/23 N.Topilin, JINR
MPD – Multi Purpose Detector – 1300 t3 main variants of moving:
1 - Simple sliding, friction coefficient – 0.2; push/pull force = 260 tNormal surface hardness
2 – Rolling, friction coefficient – 0.05; push/pull force = 65 tHigh surface hardness
3 – Air pads, friction coefficient – 0.02; push/pull force = 26 tNormal surface hardness
04/20/23 N.Topilin, JINR
Heavy objects moving
04/20/23 N.Topilin, JINR
Heavy objects moving (cont)
04/20/23 N.Topilin, JINR
900 t (1600 t) object moves on air pads
04/20/23 N.Topilin, JINR
Special lifting tool (with counterweight)
Scaffolding
04/20/23 N.Topilin, JINR
Round ladders
04/20/23 N.Topilin, JINR
04/20/23 N.Topilin, JINR
VBLHEP JINR
Auto gate
Roll way gate
Private zone
04/20/23 N.Topilin, JINR
Dubna, VBLHEP JINR
?
04/20/23 N.Topilin, JINR
THANK YOU THANK YOU FOR YOUR ATTENTION!FOR YOUR ATTENTION!
СПАСИБОСПАСИБОЗА ВНИМАНИЕ!ЗА ВНИМАНИЕ!
25