152591 - 18-06... · Web view21][11] יישור מחדש של נתוני מערך אנטנה שלבית PHASED ARRAY ANTENNA DATA RE-ALIGNMENT [54] 04.05.2001 [22] US [33] 05.05.2000

152591[21[]11]

אנטנה מערך נתוני של מחדש יישורשלבית

PHASED ARRAY ANTENNA DATA RE-ALIGNMENT

[54]

04.05.2001[22]US[33]05.05.2000[32]09/567543[31]

Int. Cl.8 H01Q 003/26[51]RAYTHEON COMPANY, U.S.A.[71]

WO/2001/086755[87]לוצאטו, את לוצאטו

שבע , באר5352, ת.ד. תעשיה, עומר גן LUZZATTO & LUZZATO,

P.O.B 5352BEER-SHEVA 84965

[74]

]57[ A data realignment system for an antenna array having plurality of subarrays (30-1-30-M) of radiating/receiving elements, comprising: a plurality of analog-to-digital converters (24) receiving data signals from the elements of said subarrays and generating digitized output data, said analog-to-digital converters selectively connect to subarrays of the antenna; a plurality of time steering clock time delay units (32-0-32-M) connected one-to-one to an input of the analog-to-digital converters to substantially zero out time misalignment due to the angle of a wave front impinging on the elements; a

clock (34) having a clock output applied to each of the plurality of clock time delay units, each clock time delay unit responding to the clock output to provide a set delay to the digitized output data by selecting the sample time of inputs to the analog-to-digital converters; and a plurality of data time delay units (360-36M) connected one-to one to the plurality of analog-to-digital converters, each data time delay unit providing a set delay to the digitized output data for realignment of data signals from the elements of said antenna.

June 11, 2006843 –התשס"ו בסיון ט"ו

__________

152756[21[]11]

BIOMETRIC IDENTIFICATIONביומטריים ואימות לזיהוי שיטהAND AUTHENTICATION METHOD

[54]

16.05.2000[22]Int. Cl.8 G07C 009/00[51]SWISSCOM MOBILE AG, SWITZERLAND

[71]

ERIC LAUPER,, ADRIANO HUBER,[72]WO/2001/088857[87]

צדק, וכהן איתן, פרל, לצר, הרצליה12688 , ת.ד. 7 שנקר רחוב

EITAN, PEARL, LATZER AND COHEN ZEDEK,

P.O.B. 12688 ,

[74]


HERZLIYA 46733

]57[ Biometric identification and/or authentication method for identifying and/or authenticating the user (1) of a terminal, characterized in that said user is identified and/or authenticated by

determining personal eye direction trajectories (51), including involuntary eye movements, with an eye-movement detection module.

__________

152969[21[]11]

מתכת המכילה אבקה לייצור שיטהקשה

METHOD OF PRODUCING HARD METAL GRADE POWDER

[54]

08.03.2002[22]AT[33]29.03.2001[32]GM230/2001[31]

Int. Cl.8 C22C 001/05[51]CERATIZIT AUSTRIA GESELLSCHAFT M.B.H., AUSTRIA

[71]

GERHARD KNUNZ,, HELMUT BEIRER,, ANDREAS LACKNER,, WOLFGANG GLATZLE,, ERWIN HARTLMAYR,

[72]

WO/2002/079531[87]




P.O.B. 12688 ,HERZLIYA 46733

[74]

]57[ A method of producing a refractory hard metal grade powder of hard material, metal binder, and non-water-soluble pressing aid components, the method which comprises: milling the hard material and the metal binder with water as a liquid phase to prepare a slurry; subsequently

mixing the pressing aid components in the form of an emulsion produced with an emulsifier and an addition of water with the slurry; and drying the slurry with the hard material, the metal binder, and the pressing aid components to form a hard metal grade powder.

__________

153013[21[]11]

PROPULSION SYSTEM[54]הנעה מערכת

07.06.2001[22]AU[33]07.06.2000[32]PQ8024[31]AU23.02.2001PR3311AU23.02.2001PR3312AU23.02.2001PR3310

Int. Cl.8 B63H 011/02, 011/12[51]PURSUIT DYNAMICS PLC, UNITED KINGDOM

[71]

WO/2001/094197[87]


ושותפיו, כהן ריינהולד , תל4060 , ת.ד. 21 העם אחד רחוב

אביב

REINHOLD COHN AND PARTNERS,

21 AHAD HA'AM ST ,.P.O.BOX 4060 ,

TEL AVIV 61040

[74]

]57[ A propulsion system (11) comprising a flow passage (173) having an intake (175) for communicating with a source of working fluid and outlet (177), a mixing zone (209) disposed within the flow passage between the intake and the outlet, means (217) for introducing a hot compressible driving fluid into the mixing zone, whereby interaction between the driving fluid and the working fluid in the mixing zone develops a pressure reduction

in the mixing zone to cause working fluid to be drawn from said source into the mixing zone and propelled towards the outlet, and means (223) for aerating the working fluid with an aerating gas prior to interaction of the driving fluid in the mixing zone whereby a three-phase fluid regime is created in the mixing zone by virtue of the interaction of the aerating gas, the working fluid and the driving fluid.

__________

153112[21[]11]

MODE TRANSLATING [54] עבור מצב לתירגום גל מוביל מתאם


WAVEGUIDE ADAPTER FOR Aקווסי–אופטי מערךQUASI-OPTIC GRID ARRAY

05.06.2001[22]US[33]13.06.2000[32]60/211252[31]

Int. Cl.8 G02B 006/26[51]CALIFORNIA INSTITUTE OF TECHNOLOGY, U.S.A.

[71]

WO/2001/097322[87]ושותפיו, כהן ריינהולד

, תל4060 , ת.ד. 21 העם אחד רחוב אביב



TEL AVIV 61040

[74]

]57[ An adapter for adapting a quasi-optic grid array (202) to a waveguide having an internal cavity defined by a wave-confining device and that guides a wave propagating in a longitudinal direction, the adapter translating between the fundamental mode of the waveguide and a desired electromagnetic field distribution at the plane of the array, comprising:(a) a first end (110) that is adapted to substantially mate with the waveguide and that defines a first aperture (120) that substantially matches the size of the waveguide cavity and;

(b) a second end (130) defining a second aperture (127) that is larger than the first aperture; and(c) a wave-confining structure (100) disposed between the first end and second end, defining a wave-guiding cavity that guides a wave propagating along the longitudinal direction of signal propagation, including a first step (102) configured within the cavity that is a predetermined distance from the first aperture and that creates a spatial discontinuity within the wave-guiding cavity of a predetermined size to create a desired field distribution.


__________

153149[21[]11]

DEGRADABLE PRACTICE MINE[54]לפירוק הניתן אימונים מוקש

27.03.2002[22]US[33]29.03.2001[32]821219[31]

Int. Cl.8 F42B 023/04[51]ALLIANT TECHSYSTEMS INC., U.S.A.

[71]

WO/2002/079715[87]ושות', לויט גבריאלי זליגסון

אביב , תל1426 , ת.ד. 31 רח' יבנה SELIGSOHN GABRIELI LEVIT &

CO,. 31 YAVNE ST.

P.O.B. 1426 TEL AVIV 61013

[74]

]57[ A method for making an inert degradable practice mine comprising the steps of:(a) covering a flat work surface with a polyethylene sheet to serve as a release film;(b) weighing out a predetermined amount of sand to a lesser predetermined amount of polyvinyl alcohol (PVA);

(c) mixing to evenly distribute the PVA throughout the sand making as and/PVA mixture;(d) providing a cylindrical mold having an internal circumference and placing a release sheet around the internal circumference of the cylindrical mold;(e) filling the cylindrical mold with the sand/PVA mixture;


(f) consolidating the sand/PVA mixture to make consolidated form;(g) removing the consolidated from the cylindrical mold; and(h) heating the consolidated form at a predetermined temperature for a

predetermined time period to make an inert degradable hardened mine form mimicking the shape and launching characteristics of a tactical mine.

__________

154213[21[]11]

של ולעיבוד תרכיז הרכב להכנת שיטהזה תרכיז

METHOD OF PREPARING A COMPOUND CONCENTRATE AND PROCESSING SUCH A CONCENTRATE

[54]

30.07.2001[22]NL[33]02.08.2000[32]1015856[31]

Int. Cl.8 A01N 059/00, C02F 001/72[51]UNIPROX B.V., THE NETHERLANDS

[71]

WO/2002/009521[87]ושות',, ט. קולב סנפורד

,2273, ת.ד. , מרמורק4 הגיא שער רחובות

SANFORD T.COLB & CO,. P.O.B. 2273 ,

REHOVOT

[74]

]57[ A method of preparing a composition for the prevention of a contamination of raw materials, products, and/or water, which composition comprises at least hydrogen peroxide, glycerol and glycol acid, and wherein a mixture a glycerol and glycol acid is added to the hydrogen peroxide, characterized in that the glycerol and the

glycol acid are combined and stirred while admixing a stabilizer for peroxide mixtures to form a stable gel-like concentrate, and in that subsequently when required, the concentrate is added in its entirety to the hydrogen peroxide in a previously determined ratio in order to form the composition.

__________


154730[21[]11]

HYDRATE DESALINATION FORמים לטיהור התפלה תהליךWATER PURIFICATION

[54]

07.09.2001[22]US[33]07.09.2000[32]60/230790[31]US18.10.200060/240986US30.08.2001941545

Int. Cl.8 C02F 001/00, 001/22, 001/26[51]MARINE DESALINATION SYSTEMS, L.L.C., U.S.A.

[71]





TEL AVIV 61040

[74]

]57[ A method of desalinating or purifying saltwater or otherwise polluted water-to-be-treated via hydrate fractionation, said method comprising: introducing said water-to-be treated into a hydrate fractionation column; injecting a hydrate-forming gas or mixture of gases into said water-to-be-treated under temperature and pressure conditions conducive to the formation of gas hydrate, whereupon said gas or mixture of gases reacts with said water-to-be-treated at apoint of hydrate formation to yield gas hydrate and residual fluid liberating heat of hydrate formation which tends to warm said residual fluid; and allowing said gas hydrate to rise through said hydrate fractionation column and to enter a hydrate dissociation region in which said gas hydrate dissociates and releases fresh water and said hydrate-forming gas or mixture of gases; wherein said hydrate

fractionation column is configured so that fluid is removed from said hydrate fractionation column from a position below said point of hydrate formation, said method comprising controlling flow rates of fluid through said hydrate fractionation column such that substantially all of said residual fluid flows downward from said point of hydrate formation and out of said hydrate fractionation column at said position below said point of hydrate fractionation and such that said gas hydrate separates from said residual fluid at or near said point of hydrate formation, whereby heat of hydrate formation is substantially carried away from said gas hydrate and out of said hydrate fractionation column by means of said residual fluid flowing out of said hydrate fractionation column via said portion below said point of hydrate formation.


__________

155353[21[]11]

לספר בית בעבור שקועות תמיה צלחותתורה

RECESSED SUPPORT PLATES FOR TORA SCROLL RECEPTACLE

[54]

10.04.2003[22]Int. Cl.8 A47G 033/00[51]

YAKOV CHANGAL[71]תקוה חנגל, פתח יעקבחדי, יורם עו"ד

, רמת-גן35 ז'בוטינסקי YORAM HEDI,,

35 JABOTINSKY ST,.RAMAT GAN 52511

[74]

) שקועות תמיכה צלחות זוג ]57[בצורת ( נעשות1) תורה ( לספר4

מהן אחת שטוחה, כל דיסקית ( בחלקו3) בגומחה שקועה משני אחד כל ( של2) התחתון

התורה, באופן ספר תיק של חלקיו הגומחה, בתוך הנחתן שלאחר

צלחת כל של העליון החלק מפלס משני אחד כל תחתית למפלס זהה

התורה ספר תיק של חלקיו במעט גבוה או לגומחה שמסביב

בעלת היא צלחת הימנה, וכל חופשית, המאפשרת תנועה

בקלות ולגלול בחופשיות לסובבה הניצבים למוטות התפור הקלף את

לכל האחד והמחוברים ורטיקלית ונתמך התחתון בקצהו צלחת

התיק של העליון בחלקו .


__________

155456[21[]11]

ניידת לפומיה טיפה תעופת תיקוןדיו להזרקת

DROP FLIGHT CORRECTION FOR MOVING NOZZLE INK JET

[54]

19.10.2001[22]US[33]20.10.2000[32]09/693279[31]

Int. Cl.8 B41J 002/14[51]SILVERBROOK RESEARCH PTY. LTD., AUSTRALIA

[71]




[74]

]57[ An ink jet printhead including a plurality of nozzles each adapted to eject drops (15) of ink through an opening (3) toward a surface to be printed; wherein the

opening is asymmetrical to provide a flight direction of ejected drops that differs from the flight direction provided if the opening were symmetrical.


__________

155458[21[]11]

ACTUATOR ANCHOR[54]מפעיל של עוגן

19.10.2001[22]US[33]20.10.2000[32]09/693708[31]

Int. Cl.8 B41J 002/04, 002/14[51]SILVERBROOK RESEARCH PTY. LTD., AUSTRALIA

[71]




[74]

]57[ An ink jet printhead including: a plurality of nozzles mounted to a rigid substrate (1), each of the nozzles being adapted to eject drops (15) of ink toward a surface to be printed; each of the nozzles also having a bend actuator (10) and an apertured roof portion (6), the bend actuator adapted for anchorage (12) to the rigid substrate and connection to the apertured roof portion such that in use the actuator moves the roof portion away from

the surface to be printed, in order to eject the ink; wherein, the displacement of all points along the operative section of the bend actuator during its movement from a de-activated to an activated state, constantly increases from zero displacement at the point of anchorage to the rigid substrate, to maximum displacement at the point of connection to the apertured roof portion.


__________

155845[21[]11]

PYROTECHNIC CHARGEפירוטכני מניע מבנהSTRUCTURE

[54]

13.11.2001[22]NO[33]14.11.2000[32]2000/5773[31]

Int. Cl.8 C06B 045/00, F42B 005/16[51]NAMMO RAUFOSS AS, NORWAY[71]HANS B. BISEROD, JOHANS HAMARSNES

[72]

WO/2002/040429[87]ושות' בע"מ, מ. בן-דוד ירמיהו

, ירושלים45087, ת.ד. חוצבים הר JEREMY M. BEN-DAVID & CO.

LTD,. HAR HOTZVIM HI-TECH PARK ,

P.O. BOX 45087 ,JERUSALEM 91450

[74]

]57[ A pyrotechnic, moulded charge structure, in particular for use as propellant in a rocket motor, in which the charge structure has a predetermined longitudinal extension and transversal cross sectional area adapted to the intended purpose, characterized in that the pyrotechnic,

moulded charge structure, in transversal cross section, is in cellular form aimed at having similar wall thickness for all the cells of the charge structure, and the walls of the cells comprise the pyrotechnic charge, i.e. the propellant, and each cavity of the cells contains air or oxygen-rich gas.

__________


156206[21[]11]

הזרקת במדפסת להדפסה והתקן שיטה מתוקן דיו באמצעות דיו באמצעות דיוסגולה אולטרה קרינה ידי על

METHOD AND APPARATUS FOR INKJET PRINTING USING UV RADIATION CURABLE INK

[54]

21.12.2001[22]US[33]02.01.2001[32]60/259582[31]US15.11.2001000282

Int. Cl.8 B41J 002/01, 011/00[51]3M INNOVATIVE PROPERTIES COMPANY, U.S.A.

[71]





TEL AVIV 61040

[74]

]57[ Inkjet printing apparatus (10) for radiation curable ink comprising: a support for receiving a substrate; a print head (14) for directing radiation curable ink toward a substrate (12) received on the support; a curing device (24) for directing radiation toward ink received on the substrate; a controller (16) having an input for receiving one or more characteristics of the

substrate and one or more characteristics of the ink, the controller including a computer for determining a desired swell time for the ink based on the characteristics of the substrate and the ink; and a control device connected to the controller for varying the dwell time in accordance with the desired dwell time determined by the computer.

__________


156411[21[]11]

שהינם בעור לטיפול תכשיריםלגירוי גורמים ואינם היפואלרגנים

HYPOALLERGENIC AND NON-IRRITANT SKIN CARE FORMULATIONS

[54]

14.12.2001[22]US[33]15.12.2000[32]60/255379[31]EP15.12.200000127555.1

Int. Cl.8 A61K 8/30[51]PATRICK FRANKE,, GERMANY[71]WO/2002/047642[87]


אביב

REINHOLD COHN AND PARTNERS, 21 AHAD HA'AM ST ,.

P.O.BOX 4060 ,TEL AVIV 61040

[74]

]57[ A hypoallergenic and non-irritant skin care formulation, wherein the formulation:(a) is free from fragrances, preservatives, colorings, plant extracts, PEFs, cetylstearyl alcohol, lanolin alcohol, lower alcohols and proteins; and

(b) comprises a water phase dispersed in an oil phase, wherein the oil phase comprises cetearyl octanoate, dicaprylyl ether, caprylic / capric triglyceride, polyglyceryl-3-diisostearate and polyglyceryl-2-dipolyhydroxystearate.

__________

156425[21[]11]

ROLL DIAPHRAGM CONTROLגלילי דיאפרגמה פיקוח שסתוםVALVE

[54]

28.10.2002[22]US[33]29.10.2001[32]60/339595[31]

Int. Cl.8 F16K 001/00, 015/00, 031/00[51]BERMAD[71]עברון ברמד, קיבוץ

ZVI WEINGARTEN[72]ויינגרטן צביWO/2003/038321[87]

ושות, פרידמן מרק ד"ראביב , תל7 רח' האומנים שמואלוב בית

DR. MARK FRIEDMAN LTD,. BEIT SAMUELOFF, 7 HAOMANIM

STREET TEL AVIV

[74]

]57[ A diaphragm control valve (10) comprising:(a) a valve body (12) with an upstream port (18) and a downstream port (16), an a valve seat (110) formed between said

upstream and downstream ports;(b) a plug housing extending from said valve body between said upstream and downstream ports, at least a portion of an interior volume of said plug housing at


least partially defining a control chamber (60);(c) a displaceable valve plug (30) at least partially deployed within said plug housing so as to be displaceable (4) between a closed position, in which a sealing portion (134) of said valve plug abuts said valve seat, and an open position, in which said sealing portion of said valve plug is separated from said valve seat; and(d) a flexible diaphragm (200) sealingly attached to said vavle plug, said diaphragm sealing said control chamber from at least a portion of said downstream port, said diaphragm having a substantially "S" shaped cross section such that a distance of said valve plug displacement within said

plug housing on each side of a central plane of attachment between said diaphragm and said plug housing is at least about twenty percent of an outer diameter of said diaphragm, providing a total distance of said valve plug displacement within said plug housing of at least about forty percent of an outer diameter of said diaphragm; wherein said valve plug is configured to be slidingly longitudinally displaceable within plug housing, and said plug housing further comprises a plurality of substantially longitudinal guide ribs (52) configured on at least one side wall so as to guide said displacement of said valve plug.

__________


156756[21[]11]

PROPORTIONER[54]ממנן

03.07.2003[22]Int. Cl.8 F16K 011/00, G05D 011/00[51]

DAN BRON[71]ברון, חיפה דןוגולר, וולף, ברגמן

,1352ב' , ת.ד. 19 היסוד קרן רחוב ירושלים

WOLFF, BREGMAN AND GOLLER,

19B KEREN HAYESOD ST .P.O.B. 1352,

JERUSALEM 91013

[74]

]57[ A proportioner (2) for the admixture, at a constant proportioning ratio, of a liquid additive to a liquid carrier, said proportioner comprising: a first flow-attenuator (26), and a second flow-

attenuator (36), wherein said first and second flow-attenuators are mechanically coupled and biased by biasing means against the carrier inflow.


__________

157094[21[]11]

אור החזרת בעל איתן אופטי מבנהגבוהה

ROBUST HIGHLY REFLECTIVE OPTICAL CONSTRUCTION

[54]

29.01.2002[22]US[33]29.01.2001[32]60/264829[31]US04.04.2001828065

Int. Cl.8 B32B 015/08, G02B 006/02[51]HONEYWELL INTERNATIONAL INC., U.S.A.

[71]





TEL AVIV 61040

[74]

]57[ An optical construction (10) comprising: an optically transmissive substrate (12); a reflective layer (14) composed of a highly reflective metal layer overlaying the optically transmissive substrate and bonded thereto; and a

protective layer (16) composed of a parylene polymer film bonded to the reflective layer, said parylene polymer film comprising a layer of parylene C in contact with the reflective layer.


__________

157155[21[]11]

עצמית, מכלול סגירה בעל שסתוםהשסתום לקיבוע ותהליך שסתום הכולל

SELF-TAPPING INSERT, INSERT ASSEMBLY AND METHOD FOR MOUNTING THE INSERT

[54]

14.01.2002[22]US[33]01.02.2001[32]775709[31]

Int. Cl.8 F16B 035/00, 037/12[51]GENERAL DYNAMICS LAND SYSTEMS, INC., U.S.A.

[71]

WO/2002/061290[87]צדק, וכהן איתן, פרל, לצר

, הרצליה12688 , ת.ד. 7 שנקר רחוב EITAN, PEARL, LATZER AND COHEN ZEDEK,

P.O.B. 12688 ,HERZLIYA 46733

[74]

]57[ A self-tapping threaded insert (20) comprising: a threaded shank (26) with a central axis (A) and including a uniform diameter thread as well as including a tapered end having a tapered thread; the tapered end of the threaded shank having at least two circumferentially spaced flutes (32) that extend to and terminate at the uniform diameter thread of the threaded shank, and each flute having a pair of flat surfaces extending perpendicular to each other and having a junction that extends angularly to the central axis of the threaded

shank; a locking flange (42) that extends outwardly from the threaded shank and has a locking surface (44) that faces toward the tapered end of the shank to provide locking against an opposed surface of a member (22) on which the insert is mounted, and the locking flange having drive surfaces (48) for providing torquing of the insert for mounting and removal; and a central connector (50) that extends from the locking flange and has a thread for securing another component to the insert and the member on which it is mounted.


__________

157429[21[]11]

יקרה אבן של והכנה להרכבה הרכבה על סימן ליצירת תעשייתי יהלום או

משטחה

METHOD OF MOUNTING AND PREPARING A GEMSTONE OR INDUSTRIAL DIAMOND FOR THE FORMATION OF A MARK ON THE SURFACE THEREOF

[54]

18.02.2002[22]GB[33]16.01.2001[32]0103881.9[31]

Int. Cl.8 B28D 005/00, 007/04, B44B 003/06, 005/02, B44C 001/00, 001/22[51]GERSAN ESTABLISHMENT, LIECHTENSTEIN

[71]




REHOVOT

[74]

]57[ A method of mounting a gemstone or industrial diamond (7) for the formation of a mark on a surface thereof, comprising placing the gemstone or diamond in a container, and moulding a holding material

(3) as a liquid between the sidewall or sidewalls (5) of the container and the gemstone or diamond in such a way the gemstone or diamond does not touch the sidewall or sidewalls of the container and,


looking in a direction normal to the surface to be marked, there is holding material both in front of and behind parts of the gemstone or diamond so that when the holding material is set, the gemstone or diamond is held securely by the holding material, and causing or allowing the holding material to set, the container defining a locating surface (10), which locating surface is directly or indirectly usable for locating the gemstone or diamond for a further procedure for the

formation of said mark, wherein when the gemstone or diamond is placed in the container, said surface is engaged with a contact surface so that at least the surface to be marked remains free of holding material, the locating surface defined by the container being coincident with or parallel to the surface to be marked, whereby the locating surface is usable for locating the gemstone or diamond with the surface to be marked substantially in a predetermined plane (6).

__________


157497[21[]11]

נמוכה תכולה בעל מאוורר קפוא מוצרשומן של

AERATED FROZEN PRODUCT WITH LOW FAT CONTENT

[54]

04.03.2002[22]GB[33]09.03.2001[32]0105767.8[31]GB21.09.20010122823.8

Int. Cl.8 A23G 009/00[51]UNILEVER PLC, UNITED KINGDOM

[71]





TEL AVIV 61040

[74]

]57[ An aerated frozen product comprising less than 8% fat by weight and characterized in that the aerated frozen product comprises fat platelets, and after it

has been melted and cooled, comprises fat platelets and spherical fat globules at a platelet to sphere ratio of greater than 0.02.

__________

158118[21[]11]

נקודות של מרחקן לקביעת שיטהדפוס תבנית של המשטח עלגבי הטלה

METHOD OF DETERMINING THE DISTANCE OF PROJECTION POINTS ON THE SURFACE OF A PRINTING FORM

[54]

25.09.2003[22]DE[33]30.09.2002[32]10245701.

8[31]

Int. Cl.8 B41C 001/00, 001/05, G01C 017/38[51]HEIDELBERGER DRUCKMASCHINEN AG, GERMANY

[71]

HARTMUT KEYL, KLAUS MULLER, THOMAS WOLF, BERNHARD ZINTZEN

[72]



P.O.B. 12688 ,HERZLIYA 46733

[74]


[57 ]A method of determining a distance of a projection point (24) of a first imaging beam (22) of an imaging device (20) from a measuring point (28) of a measuring device (26) on a surface (10) of a printing form (12), both the projection point of the first imaging beam and the measuring point of the measuring device being movable in relation to the surface of the printing form and positions of the imaging beam and the measuring point on the surface of the printing form being

determinable in relation to a fixed point, comprising the steps of: imaging a part of a first pattern using the first imaging beam as a function of the position of the imaging beam on the printing form in at least one direction spanning the surface of the printing form; measuring reflected intensity of at least a part of light illuminating the first pattern as a function of the position of the measuring device; and forming a difference of the at least one position of the measuring device and a correlated position of the first imaging beam where the first imaging beams was located as the part of the first pattern was imaged.

__________

158144[21[]11]

METHOD FOR FABRICATINGשינויים התקני ליצור שיטהDENTAL APPLIANCES

[54]

19.06.1998[22]US[33]20.06.1997[32]60/050342[31]US08.10.199708/947080

Int. Cl.8 A61C 007/00[51]DIVISION FROM 133343[62]ALIGN TECHNOLOGY, INC., U.S.A.[71]

WO/1998/058596[87]וגולר, וולף, ברגמן

,1352ב' , ת.ד. 19 היסוד קרן רחוב ירושלים

WOLFF, BREGMAN AND GOLLER, 19B KEREN HAYESOD ST .

P.O.B. 1352,

[74]


JERUSALEM 91013

[57 ]A method for fabricating a plurality of dental incremental position adjustment appliances, said method comprising: providing a digital data set representing an initial tooth arrangement; providing a digital data set representing a final tooth arrangement; producing a plurality of

successive digital data sets based on the provided digital data sets, wherein said plurality of digital data sets represent a series of successive tooth arrangements progressing from the initial tooth arrangement to the final tooth arrangement, and fabricating appliances based on at least some of the produced digital data sets.

שטרם זו לבקשה הורה בקשתפורסמה

133343The parent application from which this application has been divided has not yet been published

_________

158258[21[]11]

LEAK RESISTANT VANEלנזילה עמיד להבים מקבץCLUSTER

[54]

02.10.2003[22]US[33]08.10.2002[32]266649[31]

Int. Cl.8 F01D 009/04, 011/02, 025/26[51]UNITED TECHNOLOGIES CORPORATION, U.S.A.

[71]


אביב



TEL AVIV 61040

[74]

[57 ]A vane cluster, comprising: an outer shroud (10); a radially inner shoud (12); at least two airfoils (14) extending between the shrouds; one and only one of the shrouds having a slot (26) residing between neighboring airfoils and

extending nonlinearly from a radially inner surface of the shroud to a radially outer surface of the shroud to define shroud segments, the slot having a generally constant width.


__________

158452[21[]11]

של מעורבים איזוסטראמידים הידרוקסיאלקיל גליקול פוליאלקילן

ראולוגיים כמסייעים

MIXED POLYALKYLENE GLYCOL HYDROXYALKYL ISOSTEARAMIDES AS RHEOLOGY ADJUVANTS

[54]

03.05.2002[22]US[33]15.05.2001[32]855826[31]

Int. Cl.8 C11D 001/66[51]ICI AMERICAS INC., U.S.A.[71]

WO/2002/092740[87]ושות', ש. הורוביץ


S. HOROWITZ & CO,. 31 AHAD HA'AM STREET

P.O.B. 2499 TEL AVIV 61024

[74]

[57 ]A surfactant system comprising:)a (a primary surfactant composition; and

)b (an adjuvant composition comprising (C2-C4) alkoxylated mono (C2-C3) alkanol isostearamide, wherein the adjuvant

composition is substantially a liquid at room temperature and modifies the rheological properties of the surfactant system.

__________


158510[21[]11]

ABRADEABLE SEAL SYSTEM[54]לשחיקה הניתנת איטום מערכת

12.03.2002[22]US[33]06.06.2001[32]875764[31]

Int. Cl.8 F01D 011/08[51]CHROMALLOY GAS TURBINE CORP., U.S.A.

[71]




REHOVOT

[74]

[57 ]A gas turbine engine abradeable seal system comprising: a seal assembly and a cooperating interacting turbine blade; the turbine blade having a tip portion containing cubic boron nitride abrasive particles for contacting the seal assembly to provide sealing; the seal assembly having a superalloy substrate, an MCrAlY

bond coat on the surface of the substrate having a surface roughness of greater than 300 RA, wherein M is selected from the group consisting of Co, Ni, or Ni and Co, and a porous ceramic abradeable seal material on the bond coat having a porosity

of from 5 to 15 vol.%

__________

158528[21[]11]

ומערכת ושיטות פילמים של למינציותלייצורם

LAMINATES OF FILMS AND METHODS AND APPARATUS FOR THEIR MANUFACTURE

[54]

14.06.2002[22]GB[33]15.06.2001[32]0114691.9[31]

Int. Cl.8 B32B 003/28, 027/00, 027/32, B65D 065/40[51]OLE-BENDT RASMUSSEN, SWITZERLAND

[71]





TEL AVIV 61040

[74]

[57 ]Laminate comprising at least a monofilm formed or multifilm formed ply (A) and another monofilm formed or

multifilm formed ply (B) both mainly consisting of thermoplastic polymer material, whereby at least A consists of


cold-orientable material in which A has a wave flute configuration while B is not waved, and B on a first side is adhesively bonded by heat sealing in bonding zones to the crest on a first side of A, characterized in that the wavelength (λ) of the said configuration is not more than 3 mm, that the adhesive bonding has been established through a lamination layer, and in that either the thickness of A is generally the same within the non-bonded zones as it is

within the bonded zones, or A exhibits first solid-state-attenuated zones extending parallel to the flute direction, each bonding zone mainly being located within a said first attenuated zone whereby each said first attenuated zone is understood as delimited by the positions where the thickness is an average between A's lowest thickness within the first attenuated zone and the A's widest thickness within the adjacent non-bonded zone.

__________

159146[21[]11]

להספקת התקן עבור חרירים משטחטיפות

NOZZLE PLATE FOR DROPLET DEPOSITION APPARATUS

[54]

05.06.2002[22]GB[33]05.06.2001[32]0113639.9[31]

Int. Cl 8B41J 002/16[51]XAAR TECHNOLOGY LIMITED, UNITED KINGDOM

[71]



P.O.B. 12688 ,HERZLIYA 46733

[74]

[57 ]A nozzle plate (10) for droplet deposition apparatus, the nozzle plate comprising a body (12) and a plurality of nozzles (18), each nozzle having an inlet (22), an outlet (20) and a bore (24)

extending between the inlet and the outlet and formed through polymeric material located within an aperture (28) (not shown) formed in the body.


__________159250[21[]11]

PROCESS FOR STORINGמעושרות נמטודות לאחסון תהליךENRICHED NEMATODES

[54]

04.06.2002[22]US[33]29.06.2001[32]893875[31]

Int. Cl.8 A01K 067/033, A23K 001/18[51]בע"מ, ירושלים ביוטק פיש

בישראל והאגמים הימים לחקר המכוןבע"מ, חיפה

FISH BIOTECH LTD.ISRAEL OCEANOGRAPHIC AND LIMNOLOGICAL RESEARCH LTD.

[71]

SHALOM ZEMACH, AMOSקובן טנדלר, ויליאם צמח, עמוס שלוםTANDLER, WILLIAM KOVEN

[72]

WO/2003/001909[87]ושות, פרידמן מרק ד"ר

אביב , תל7 רח' האומנים שמואלוב בית DR. MARK FRIEDMAN LTD,.

BEIT SAMUELOFF, 7 HAOMANIM STREET

TEL AVIV

[74]

[57 ]A process for preserving nematodes having an increased feeding value, for use in aquaculture, the process comprising the steps of:

)a (enriching nematodes with aquaculture feed additives; and

)b (desiccating enriched nematodes.

__________

159489[21[]11]

COMPRESSION IGNITIONהצתה מנועיENGINES

[54]

04.06.2002[22]AU[33]04.06.2001[32]PR5435[31]

Int. Cl.8 F02M 021/04[51]DH3 PTY LTD., AUSTRALIA[71]WO/2002/099265[87]



[74]



TEL AVIV 61040

[57 ]A method of supplying a fuel supply to a compression ignition internal combustion engine (6) which includes having an air supply (3) to the engine first caused to pass through a natural vortex creator (1), and effecting a supply of

supplementary fuel (8) to the engine by introducing supplementary fuel into a low pressure area within a central area of any natural vortex being created by the vortex creator.

__________

159740[21[]11]

אמינו-אלכוהול מלחי להפקת תהליךפחמניים תלת

PROCESS TO PRODUCE 3-CARBON AMINO ALCOHOL SALTS

[54]

13.10.1998[22]US[33]07.11.1997[32]60/064738[31]

Int. Cl.8 C07C 213/04, 215/08, 317/32[51]DIVISION FROM 135912[62]PHARMACIA & UPJOHN COMPANY, U.S.A.

[71]



P.O.B. 12688 ,HERZLIYA 46733

[74]

[57 ]A process for preparation of an (S)-3-carbon amino alcohol salt of the formula X2-CH2-C*H(OH)-CH2-NH3+

where:)I (X2 is:)A – (Cl,

)B – (Br,)C (p-CH3-ΦSO2-(D) m-NO2-ΦSO2- which

comprises:)1 (contacting phthalimide

with an (S)-protected-epoxide of formula X2-CH2-C*#H-CH2-O-#


in the presence of potassium phthalimide in DMF or DMAC where:

)I # (indicates that the atoms marked with a (#) are bonded to each other resulting in the formation of a ring;

)II (X2 is as defined above; to give an (S)-phthalimide alcohol of formula

where X2 is as defined above and)2 (contacting the product of step (1)

with aqueous acid.__________

159766[21[]11]

של מבוקר לשחרור אורלי מינון צורתהידרומורפון

SUSTAINED RELEASE ORAL DOSAGE FORM OF A HYDROMORPHONE

[54]

03.11.1995[22]US[33]04.11.1994[32]334209[31]

Int. Cl.8 A61K 009/14, 009/22, 009/52, C07D 489/02[51]DIVISION FROM 115871[62]EURO-CELTIQUE S.A., LUXEMBOURG

[71]

וגולר, וולף, ברגמן ,1352ב' , ת.ד. 19 היסוד קרן רחוב

ירושלים

WOLFF, BREGMAN AND GOLLER, 19B KEREN HAYESOD ST .

P.O.B. 1352,JERUSALEM 91013

[74]

[57 ]A sustained release oral pharmaceutical formulation comprising (a) a hydromorphone or a pharmaceutically acceptable salt thereof and (b) a hydrophobic material, wherein said

formulation provides a mean plasma concentration time curve as depicted in figure 14 as shown in the specification when administered in a patient population in a fasted state or in a fed state.

__________


160173[21[]11]

מיקרו הכולל דמות להדפסת מכשירמבקר

IMAGE PRINTING APPARATUS INCLUDING A MICROCONTROLLER

[54]

09.07.2002[22]US[33]06.08.2001[32]09/922275[31]

Int. Cl.8 B41J 002/07, 002/17, G06F 003/12[51]SILVERBROOK RESEARCH PTY. LTD., AUSTRALIA

[71]




[74]

[57 ]An image printing apparatus that comprises a print head (44) for printing images (8); and a microcontroller that comprises a wafer substrate; processor circuitry that is positioned on the wafer substrate; print head interface circuitry that is positioned on the wafer substrate and is connected between the processor circuitry and the print head, the print head interface

circuitry being configured to facilitate communication between the processor circuitry and the print head; and bus interface circuitry that is discrete from the print head interface circuitry and is connected to the processor circuitry so that the processor circuitry can communicate with devices other than the print head via a bus.


__________

160175[21[]11]

PRINTING CARTRIDGE WITHרדיו תדר של זיהוי עם הדפסה מחסניתRADIO FREQUENCY IDENTIFICATION

[54]

09.07.2002[22]US[33]06.08.2001[32]922047[31]


[71]




[74]

[57 ]A method of determining media of a printing cartridge (1236), the method comprising the step of reading a radio frequency tag (1232) positioned on a housing (1234) of the printing cartridge

with a radio frequency tag reader (1242) positioned in a printing device with which the printing cartridge is engaged, the radio frequency tag carrying data relating to the media of the printing cartridge.


__________

160179[21[]11]

APPARATUS AND METHODS FORתוך-גופית להדמיה ושיטות מכשירIN VIVO IMAGING

[54]

01.08.2002[22]US[33]02.08.2001[32]60/309169[31]

Int. Cl.8 A61B 005/00, 006/00[51]GIVEN IMAGING LTD.[71]בע"מ, יקנעם אימג'ינג גיוון

ARKADY GLUKHOVSKY[72]ארקדי גלוקחובסקיWO/2003/011103[87]



P.O.B. 12688 ,HERZLIYA 46733

[74]

[57 ]An in vivo imaging device (40) comprising: an illumination source (25A); at least one image sensor (34); and at least two optical systems (32A, 32B), at least two of said optical systems having

different depths of focus and said optical systems capable of focusing at least a first and second image onto said at least one image sensor.


__________

160381[21[]11]

LENS DELIVERY SYSTEM[54]עדשות למתן מערכת

12.02.2004[22]US[33]28.05.2003[32]10/446761[31]

Int. Cl.8 A61B 017/00, A61F 002/16[51]ALCON, INC., SWITZERLAND[71]

לוצאטו, את לוצאטושבע , באר5352, ת.ד. תעשיה, עומר גן

LUZZATTO & LUZZATO, P.O.B 5352

BEER-SHEVA 84965

[74]

[57 ]An intraocular lens delivery system (10), comprising:

)a (a injector body (14);)b (a plunger (16) adapted to reciprocate

within the injector body;)c (a nozzle portion (12) having a hollow

interior received on the distal end (62) of

the injector body, the nozzle portion having a removable lid (38);

)d (a nozzle tube (44) on the distal end of the nozzle portion; and

)e (a stop frictionally engaged on the lid.


__________

160622[21[]11]

הזרקת–דיו למדפסת דיו אספקת סידורניידת

INK SUPPLY ARRANGEMENT FOR A PORTABLE INK JET PRINTER

[54]

13.06.2002[22]US[33]31.08.2001[32]09/942604[31]


[71]




[74]

[57 ]A portable inkjet printer comprising: an elongate pagewidth printhead (431) having a plurality of ink supply passages, an elongate pagewidth ink distribution manifold connected to said printhead and substantially coextensive therewith, the manifold including a plurality of ink outlets corresponding to said ink supply passages on the printhead, and further including a plurality of ink inlets positioned along the manifold, anelongate pagewidth ink supply unit (430) connected to said manifold and substantially coextensive therewith and including at least one elongate pagewidth storage

chamber (521) for holding ink for supply to said manifold, said storage chamber including a series of baffles (441-443) spaced along the storage chamber and extending in a transverse direction so as to define chamber portions each including a hole (440) aligned with said ink inlets and via which ink in the chamber portions can flow to the manifold, the baffles acting to reduce excessive acceleration of ink along the storage chamber from one said chamber portion to another as may be induced by movement of the portable printer, whilst allowing for flows of the ink


from said chamber portions to the manifold inlets via said holes in response to active demand from said printhead.


__________

Documents

152591 - 18-06... · Web view21][11] יישור מחדש של נתוני מערך אנטנה שלבית PHASED ARRAY ANTENNA DATA RE-ALIGNMENT [54] 04.05.2001 [22] US [33] 05.05.2000