A-CA74EShoulder Adapter

UNC

仕様及び外観は、予告なく変更することがあります。 製品および製品保証に関するお問い合わせは弊社営業部にて受け付けております。

APXK100081-04

A-CA74EShoulder Adapter

Change the battery mounting unitat high or low position by loosening the screw . 4 position

Screw for Sony camera(UNC 1/4-20)

Rotate the unit by loosening the lever .

Change the angle of battery mounting unit by loosening the knob .

Various palmcorders and still cameras can be mounted.Regulated DC voltage supply from optional P-V plate

with professional battery enables longer operation time.Flexible structure design enables folding the system

when carrying and/or stored.

Pull up lever to re-position the lever angle.

Align the screw holes of the base plate and sliding plate, then insert the additional screw.

Move the sliding plate to appropriate position, then set the camera.

Move the sliding plate at the front of base plate.

Use four cable binders for crimping the DC-DC cable.

Optional Shoulder Mount Supporter

Select the DC-DC cable and P-V plate by maker / type of camcorder.

Choose adequate screw positionand make sure it is tightened properly.

adequate screw position

In case of use Sony Camera

V-Mount battery mounting plateThank you for purchasing the A-CA74E. A-CA74E is specially designed to be mounted to various palmcorders available in the market and it makes small palmcorders for ENG/EFP applications more convenient. By selecting from optionalP-V plate series, professional large capacity 14V battery can be mounted to the rear then supply the DC power to thepalmcorder as well as camera light. Prior to using the A-CA74E, IDX recommends reading this Instruction Manual on how to best use A-CA74E and keep this manual for your reference.

Dimensions : 355 (W) 105 (H) 140 (D) mm13.9 (W) × 4.13 (H) × 5.51 (D) inches .

when foldedWeight : approx. 1500 g / 3.30 lbs . Standard Accessories : Instruction manual x 1

Do not attempt to modify this unit. All work should be carried out by IDXauthorized service personnel only.Tighten all the levers and screws prior to use; otherwise, it may cause serious injury or damage to the equipment.If you need any inspection or repairs, please contact your IDX dealer or appropriate IDX office.

Example

Design and specification are subject to change without notice.

201006df

Optional Accessories

Features Specifications

Shoulder Adapter Set up

+1-310-328-2850 +1-310-328-8202

Camcorder recognizes the external DC input when supplying the power through V-Plate; however, the battery remaining indication on the EVF will be different from the battery operation. Thus, IDX recommends exchanging the battery in a timely manner. Display method / icon of external DC is different by camera manufacturer and by model.

Bottom

REAR

FRONT

REAR

FRONT

REAR

FRONT