CURRICULUM VITAE April 2016

Michael Zinigrad

TEL: 972 3 9066281FAX: 972 3 9371465Email: rector@ariel.ac.il Languages Hebrew, English, German, Russian, Ukraine

EDUCATION: 1982 Dr.Sc. Physical chemistryUSSR Academy of Science, Institute of MetallurgyTitle of Thesis: Kinetics and mechanism of theinteraction of sulfid-metal and oxide melts

1972 Ph.D. Metallurgy of non-ferrous, noble and rare metalsUSSR Academy of Science, Institute of Electro-chemistryTitle of Thesis: Kinetic analysis of sulphide sulphur oxidation by slags

1968 M.Sc. Metallurgical engineer, physical-chemical investigations of metallurgical processes. Dnepropetrovsk Metallurgical Institute

Title of Thesis: Synthesis and crystalic structure of some

solid solution

AREAS OF EXPERTISE

Over 30 years experience in Materials Science and Materials Engineering, Mathematical modeling and simulation. Founded the Research Laboratory for Advanced Materials Investigations. Theoretical and experimental investigations on high-temperature processes. Development of new materials on the basis of mathematical modeling of physico-chemical and technological processes.

ACADEMIC AND PROFESSIONAL EXPERIENCE

1993 – present Full professor, Ariel University

2008 – present Rector, Ariel University 1995 – 2008 Dean of the Natural Science Faculty, Ariel University 1998 – present Scientific Manager, Chisumim Ltd.1999 – present Head of the Materials Research Center, Ariel University 1983 - 1992 Full professor, Urals Technical University1988 - 1991 Head of the Welding Department, Urals Technical University1976 - 1983 Associated professor, Urals Technical University1972 - 1976 Assistant, Urals Technical University1969 - 1972 Post graduate, Urals Technical University

1

Scientific supervision :16 Ph.D Students, 37 Master Students and 5 Post Doctorants.

PROFESSIONAL SOCIETIESAmerican Welding Society (AWS);Materials Information Society (ASM International);Materials Data Bases International Commission;Israeli Welding Society;Coordination Committee for Metallurgical and Welding Technologies, Paton Institute, Ukraine;Israeli Material & Processes Society (IMPS).

VISITING POSITIONS

Sum. 1997 Visiting Professor, Urals State Technical University, RussiaSum. 1998 Visiting Professor, Central Iron and Steel Institute, Beijing, China

Sum. 2001 Visiting Professor, Institute of Metallurgy, Russian National Academy of Science

PUBLICATIONS AND PATENTS

Two monographs, over 200 scientific publications, 6 patents, 22 text-books, over 80 presentations on international scientific conferences.

RESEARCH GRANTS

1997 - 2000

Development of high – temperature wear – resistant metallic material based on Ni - Al intermetallics by

China - Israel Foundation for Scientific and Strategic R&D,

Israeli Ministry of Science

1998 - 2001

New compositions of flux core electrodes

Israeli Ministry of Industry and Trade

1998 - 2000

Development of a new welding material

General Motors Foundation

1999 - 2001

Modeling and simulation in Materials Engineering

General Motors Foundation

2002 Airpressure Welding of Dissimilar Metals

General Motors Foundation

2004 Synthesis of compact nanocrystal lanthanum manganites by the hard plastic deformations method. Investigations of the structure and stability of the nanostates in different oxidizing media, analysis

Israeli Ministry of Science

2

of electric, magnetic and diffusion properties

2006 Obtaining Compact Nanomaterials Based on Transition Metal Oxides by Intensive Plastic Deformations, Investigating their Structure and Properties

Israeli Ministry of Science

2006 Environmentally Friendly Coating Technology As An Alternative To The Electrolytic Hard Chrome Plating

Israeli Ministry of Industry

Framework "MAGNETON"

2007 Developing of the Metal Materials with required structure and properties using nano sized powders.

Israeli Ministry of Industry

Framework "NOFAR"

2009

2012

Technology development for mechanical properties improvement of cast aluminum alloys by nano and ultrafine materials.

Development a technology for producing dental implants with surface coatings improved for osseointegration.

Israeli Ministry of Industry

Framework "MAGNETON"

Framework of the Resolution of the Perm Krai Governments, Russia «About granting of subsidies for realization of scientific projects by international research groups of scientists on the base of state educational institutions of higher professional education".

3

LIST OF MAIN PUBLICATIONS

MONOGRAPHS

1. V. Boronenkov , M. Zinigrad, L. Leontiev, E. Pastukhov, M. Shalimov, S. Shanchurov. Phase Interaction in the Metal - Oxides Melts - Gas System: The Modeling of Structure, Properties and Processes. Shpringer, 380p., (2011).

1.a. V.N. Boronenkov, M.I. Zinigrad, L.I. Leontiv, E.A. Pastukhov, M.P ShalimovS.M. Shanchurov. Simulation of structure properties and interphase interaction processes in Metal- Oxide Melt-Gas System. Ural branch of RAS, 450p.,Ekaterinburg (2010)

BOOK CHAPTERS

1. K. Borodianskiy and M. Zinigrad, Computational Methods for Creation Materials with Required Composition and Structure. Chapter in Materials Science book, Intech publ., 445-464, (2013).

2. A.Lugovskoy and M. Zinigrad, Plasma Electrolytic Oxidation of Valve Metals. Chapter in Materials Science Advanced topics, pp. 85-102, (2013).

3. K. Borodianskiy, M. Zinigrad. Computational Methods for Creation Materials with Required Composition and Structure. Materials Science Advanced Topics,pp. 445-464, (2013).

PATENTS

1. M. Zinigrad, A. Balin, B. Zilbergleit. “Flux for hardsurfasing”.Patent USSR 1073975 (1983).

2. M. Zinigrad, A. Balin, L. Barmin, B. Zilbergleit. Flux for hardsurfasing.Patent USSR 1075544 (1983).

3. M. Zinigrad, V. Ilinsky, A. Fljagin, A.Balin. Ceramic flux for hardsurfasing.Patent USSR 1352820 (1988).

4. M. Zinigrad, V. Ilinsky, A. Okolzdajev, A. Fljagin. Ceramic flux for hardsurfasing. Patent USSR 1485543 (1989).

5. M. Zinigrad, M.Shalimov, A. Timoshin. Flux for electroslag remelting of Ni alloys. Patent USSR (1991).

6. A. Krasnopolski, M. Zinigrad. Method and system for cooling by using solar energy. Patent WO 2008135990 A2 (2008).

TEXT BOOKS

1. M. Zinigrad, V. Kojurkov. “The guide to lab works on course "Physical chemistry", Sverdlovsk, 48p. (1976).

4

2. M. Zinigrad, V. Novikov. The guide to lab works on course "Theory of metallurgical processes", Sverdlovsk, 36p. (1976).

3. M. Zinigrad, V. Kojurkov. "Physical chemistry". Recommendations. Sverdlovsk, 12p. (1976).

4. M. Zinigrad, G. Toporischev, V. Kojurkov. Recommendations for realization of Master's Thesis of specialization "Physical chemistry". Sverdlovsk, 12p. (1977).

5. M. Zinigrad, V.Shumjakov. "Theory of welding processes", recommendations. Sverdlovsk, 22p. (1977).

6. M. Zinigrad. Anticorrosive electro-chemical protection of steels. The guide to lab works on course "Corrosion and protection of metals", Sverdlovsk, 24p. (1978).

7. M. Zinigrad, V.Shumjakov. The guide to lab works on course "Theory of welding processes", Sverdlovsk, 38p. (1978).

8. M.Zinigrad, V. Lepinsky, S. Istomin. Quality inspection of welding. The guide to lab works, Sverdlovsk, 38p. (1982).

9. M.Zinigrad, V. Lepinsky, A. Phljagin. Quality inspection of welding. Recommendations. Sverdlovsk, 17p. (1983).

10. M.Zinigrad. Quality inspection of welding. Recommendations. Moscow, 12p. (1984).

11. M.Zinigrad. Radiographic testing of metals. Recommendations. Moscow, 12p. (1984).

12. M. Zinigrad, L. Barmin, V. Lepinsky. Corrosion and protection of metals. Recommendations. Moscow, 12p. (1984).

13. M. Zinigrad, V. Lepinsky. Corrosion and protection of metals. Recommendations for foreign students. Sverdlovsk, 12p. (1984).

14. M. Zinigrad, V. Lepinsky, A. Fljagin, A. Phefelov. Corrosion and protect of metals. The guide to lab works. Sverdlovsk, 84p. (1984).

15. M.Zinigrad. Metallurgical and technological reasons of welding defects. Recommendation. Sverdlovsk, 60p.(1984).

16. M. Zinigrad, V.Shumjakov. The guide to lab works on course "Theory of welding processes". Sverdlovsk, 36p. (1985).

17. M. Zinigrad, A. Phljagin. Computer calculation of equilibrium composition of multicomponents alloys on iron and slag bases. Recommendation. Sverdlovsk, 43p.(1987).

18. M. Zinigrad, N. Kremnev. Magnetic nondestructive testing of metals. Recommendations. Sverdlovsk, 17p. (1989).M. Zinigrad, N. Kremnev

19. Liquid penetrant nondestructive testing of metals. Recommendations. Sverdlovsk, 18p. (1989).

20. M. Zinigrad, N. Kremnev. Radiographic nondestructive testing of metals. Recommendations. Sverdlovsk, 17p. (1989).

21. M. Zinigrad, N. Kremnev. Ultrasonic nondestructive testing of metals. Recommendations. Sverdlovsk, 19p. (1989).

22. M. Zinigrad, A. Phljagin. Computer calculation of chemical composition of metal in welding and hardsurfasing. Recommendation, Sverdlovsk, 67p. (1989).

5

ARTICLES

1. M. Zinigrad, A. Schepetkin, A. Men, G. Chufarov . Crystal-chemical changes during titan cobalt dissociation at equilibrium conditions. Journal of the physical chemistry, v.43, n.12, 3084 (1969).

2. M. Zinigrad, A. Schepetkin, G. Chufarov. Synthesis of spinel solid solutions in systems Me-Ti-Fe-O ( Me = Zn, Co, Ni, Mn ). Crystallografiya, v.14, n.5, 889 (1969).

3. M. Zinigrad, L.Barmin. Velocity of the interaction of cupric sulfide with cupric oxide dissolved in slag. Izvestiya vuzov. Tsvetnaya metallurgiya, n.6, 28-33 (1971).

4. M. Zinigrad, L. Barmin, A. Sotnikov. Kinetics of the interaction of cupric, nickel and cobalt sulfide with corresponding oxides dissolved in slag. Izvestiya vuzov. Tsvetnaya metallurgiya, n.1, 32-36 (1972).

5. M. Zinigrad, L. Barmin. The rate of cobalt sulfide oxidation by oxide melt involving cobalt oxide (II). Physical-chemical processes in non-ferrous metallurgy, n.204, 115 (1972).

6. M. Zinigrad, A. Sotnikov, L.Barmin. Investigation of the anodic polarization of liquid sulfides in oxide melts. Izvestiya Ac.Nauk SSSR, n.3, 97-102 (1973).

7. A. Sotnikov, M. Zinigrad, L. Barmin. Oxygen role in kinetics of the interaction of Ni-S alloys with liquid oxides. Izvestiya vuzov. Tsvetnaya metallurgiya, n.6, 40-43 (1973).

8. M. Zinigrad, A. Sotnikov, L.Barmin. Investigation of sulfides-slags interaction by relaxation techniques. Physical-chemistry of the metallurgical processes, n.1, 80 (1973).

9. M. Zinigrad, L. Barmin, A. Sotnikov. Kinetics and mechanism of sulfides oxidation by slag melts. Electrohimiya i rasplavy, "Nauka",M. 228-235 (1974).

10. Y. Nikitin, M. Zinigrad, A. Sotnikov, L.Barmin. The function of the absorption in processes of oxygen transition from slag to metal. Kinetics and thermodynamics of gases-liquid metals interaction, "Nauka",M. 72 (1974).

11. M. Zinigrad, L. Malisheva, L. Barmin. Peculiarities of anodic polarization of liquid ferrous sulfide within liquid oxides. Izvestiya vuzov. Tsvetnaya metallurgiya, n.5, 91-95 (1975).

12. M. Zinigrad, L. Barmin, A. Sotnikov. Kinetics and mechanism of discharge of oxygen ions in liquid sulfides. Physical-chemistry of the metallurgical processes, n.3, 79 (1975).

13. M. Zinigrad, L. Barmin, E. Eremin, B. Kulishenko, V. Kojurkov. Improvement of weld metal forming under welding of transformer steel. Avtomaticheskaya svarka, n.7, 66 (1976).

14. L. Barmin, M. Zinigrad, A. Phljagin. Kinetics of aluminum transition through metal-slag boundary Izvestiya vuzov. Chernaya metallurgiya, n.7, 59-62 (1976).

15. M. Zinigrad, L. Malisheva, L. Barmin. Oxygen transition through ferrum sulfide/ionic melts interface. Physical-chemistry of ionic melts, ch.2, Kiev, 36 (1976).

16. M. Zinigrad, S. Panov, L. Barmin. Viscosity coefficient dependents on concentration. Structure and property of the metal and slag melts, Sverdlovsk, 70 (1976).

6

17. L. Malisheva, M. Zinigrad, L. Barmin. Investigation of oxygen transition through the boundary of ferrous sulfide and oxide melt. Izvestiya vuzov. Tsvetnaya metallurgiya, n.1, 148-150 (1977).

18. M. Zinigrad, A. Phljagin. Electrochemical behavior of aluminum at ferrum-carbon melt/oxide electrolyte interface. Present problems of physical-chemistry of solution, ch.2, Leningrad, 47 (1977).

19. M. Zinigrad, A. Phljagin, L. Barmin, K. Jdanovich, A. Zaytsev. Equilibrium distribution of aluminum between ferrous alloys and aliment slag. Physical-chemistry of the metallurgical processes, n.5, 76 (1977).

20. E. Eremin, B. Kulishenko, M. Zinigrad. On tungsten electrode stableness while welding in mixture of argon and carbon oxide. Svarochnoye proizvodstvo 1,17-18 (1979).

21. L.Panphilova, M. Zinigrad, L. Barmin. The influence of oxygen surface concentration in Me-S alloys on kinetics of oxygen transition through the boundary of sulfide and oxide melt. Journal of the physical chemistry, n.10, v.5, 2491-2494 (1978).

22. M. Zinigrad, A. Panov, L. Barmin, K. Jdanovich, A. Zaytsev. Influence of temperature and concentration of aluminum on melts viscosity in system Fe-C-Al. Physical-chemistry of the metallurgical processes, n.6, 54 (1978).

23. V. Boronenkov, S. Shantshurov, M. Zinigrad. Kinetic analysis of metal admixtures joint oxidation by slag. Izvestiya Ac. Nauk SSSR. Metally, n.6, 21-27 (1979).

24. M. Zinigrad, Y. Nikitin, E. Belyaeva. Kinetics of slag on metal at conditions of components transfer through interface. Physical-chemistry of the metallurgical processes, n.7, 116 (1979).

25. M. Zinigrad. Influence of surface properties of liquid phase on formation of crystallization cracks in overwelding of iron and boron slags. Adgeziya rasplavov i payka materialov, issue 5,83-86 (1980).

26. L. Panphilova, M. Zinigrad, L. Barmin. Laws of the oxidation of ferrous, cupric, nickel and cobalt sulfides by slags. Izvestiya Ac. Nauk SSSR. Metally 4, 19-24 (1979).

27. A.Phliagin, M. Zinigrad, L. Barmin. Kinetics of ionic exchange between Fe-C-Al melt and an oxide electrolyte. Electrohimiya, v.15, issue 12, 1858-1861 (1979).

28. M. Zinigrad, V. Kojurkov, A. Phljagin. Influence of aluminum and carbon on equilibrium concentration of oxygen in fermium-carbon melt. Physical-chemistry of the metallurgical processes, n.8, 82 (1980).

29. M. Zinigrad, A. Sotnikov, A. Phljagin, L. Barmin. Limiting stage of electrochemical oxidation of metal/slag interface. Physical-chemistry of the metallurgical processes, n.8, 99 (1980).

30. M. Zinigrad, S. Panov, L. Barmin. Sulfur transfer through metal melt/slag melt interface. Chermetinformation, n.931 (1980).

31. M. Zinigrad, S. Panov, L. Barmin. Limiting stage of Fe-C melt desulphurisation by slags. Chermetinformation, n.938 (1980).

32. M. Zinigrad, S. Panov, L. Barmin. Investigation of fast stage of Fe-C melt desulphurisation by slag. Structure and property of the metal and slag melts, Sverdlovsk, 60 (1980).

33. M. Zinigrad, A. Phephelov, L. Barmin. Interaction of Fe-B melts and slag melts. Structure and property of the metal and slag melts, Sverdlovsk, 89 (1980).

7

34. M. Zinigrad, G. Toporistshev, V. Najdenov. Limiting stage of sulfur oxidation from sulfide melts by oxygen from slags. Izvestiya vuzov. Tsvetnaya metallurgiya, n.1, 29-33 (1981).

35. M. Zinigrad, S. Panov, L. Barmin. Kinetic peculiarities of desulfurize of Fe-C melts by slag. Izvestiya vuzov. Tchernaya metallurgiya, n.2, 4-6 (1981).

36. M. Zinigrad, G. Toporistshev. Velocity of quick stage of sulfur oxidation from sulfide melts by oxygen from slag. Izvestiya vuzov. Tsvetnaya metallurgiya, n.2, 32-36 (1981).

37. L. Panphilova, M. Zinigrad, L. Barmin. Quick stage kinetics of oxygen ion discharge on the boundary of sulfide melts and liquid oxides. Electrohimiya, v.17, issue 9, 1346-1349 (1981).

38. M. Zinigrad. The peculiarities of oxidation of sulfur from sulfide-metal melts by liquid slags' oxygen. Physical-chemistry of the metallurgical processes, n.9, 87 (1981).

39. M. Zinigrad, S. Panov, L. Barmin, M. Shalimov. Investigation of sulfur distribution between melts Fe-C-S and slag. Physical-chemistry of the metallurgical processes, n.9, 60 (1981).

40. M. Zinigrad, S. Panov, L. Barmin. Kinetic parameters of sulfur transition quick stage through the boundary of Fe-C and oxide melts. Electrohimiya, v.18, issue .4, 523-526 (1982).

41. M. Zinigrad, L. Panphilova, L. Barmin. Kinetic analysis of oxide-sulfide interaction. Physical-chemistry of the metallurgical processes, n.10, 83 (1982).

42. M. Zinigrad, M. Shalimov , S. Panov, L. Barmin. Kinetic analysis of joint transfer of S, Fe, C, Al metal/synthetic slag interface. Physical-chemistry of the metallurgical processes, n.10, 107 (1982).

43. M. Zinigrad, A. Phephelov, L. Barmin, M. Shalimov. The oxidation rate of boron that is dissolved in metal by oxide melt. Chermetinformation, n.1533 (1982).

44. M. Zinigrad, A. Phephelov, L. Barmin, M. Shalimov. The peculiarities of kinetic stage of boron transfer through metal/oxide interface. Chermetinformation, n.1569 (1982).

45. M. Zinigrad, L. Panphilova, L. Barmin. Surface concentration of oxygen in sulfide-metal melts and the rate of oxygen transition through sulfide/oxide melt interface. Surface properties of melts, Kiev, "Naukova dumka", 286 (1982).

46. M. Zinigrad, N. Korolev, I. Noskov, L. Tolstych. Physical-chemical peculiarities of alloying of weld metal. Welding materials, Kiev, "Naukova dumka", 37 (1982).

47. V. Boronenkov, M. Zinigrad, M. Shalimov. Mathematical modeling of metal and slag processes interaction in a ladle. Izvestiya vuzov. Tchernaya metallurgiya, n.1, 36-41 (1983).

48. M. Zinigrad, Y. Nikitin, S. Tretyakov, N. Vlasov. Kinetics of formation of the sulfide-metal melt/oxide melt. Physical-chemistry of the metallurgical processes, n.11, 128 (1983).

49. M. Zinigrad. Meeting of Ural's welders. Avtomaticheskaya svarka, n.8, 78 (1983).

50. M. Zinigrad, S. Panov. Desulphurisation of Fe-C melts by oxides. Structure and property of the metal and slag melts. Sverdlovsk, 142 (1983).

51. M. Shalimov, A. Phephelov, M. Zinigrad. Calculation of the metal composition after hardsurfacing under ceramic flux. Avtomaticheskaya svarka, n.1, 33-36 (1984).

8

52. M. Zinigrad, M. Shalimov , S. Panov, A. Phephelov, A. Phljagin. Calculation of equilibrium distribution of elements between metal and slag melts. Structure and property of slag melts, ch.1, Kurgan, 62 (1984).

53. M. Zinigrad, A. Timoshin, V. Lepinsky. Cathodic deposition of Fe, Ni, Co from the melt based on MgF. Structure and property of slag melts, ch.2, Kurgan, 73 (1984).

54. A. Phephelov, M. Zinigrad, B. Arnautov. Flux for alloying of metal by boron in hardsurfacing. Svarochnoye proizvodstvo, n.4, 21-22 (1985).

55. A. Phephelov, M. Zinigrad, B. Arnautov. Influence of boron flux concentration on the coefficient of boron transition into hardsurfacing metal. Svarochnoye proizvodstvo, n.10, 36-37 (1985).

56. M. Zinigrad, A. Balin, A. Phephelov, L. Barmin, M. Shalimov. Kinetics of boron reduction from oxide melt by carbon that is dissolved in Fe. Chermetinformation, n.3017 (1985).

57. M. Zinigrad, A. Okolzdajev, A. Phljagin. Anodic oxidation of tungsten on metal/oxide electrolyte interface. Physical chemistry of high temperature and electrochemistry, ch.1, Sverdlovsk, 167 (1985).

58. M. Zinigrad, M. Shalimov, A. Phljagin. Improvement of technology of steel refining by application of modeling. Theory and practices of steel refining processes, Moscow, 128 (1985).

59. A. Phljagin, A. Phephelov, M. Zinigrad. Kinetics of Al and B crossing through the boundary liquid metal-oxide melt. Izvestiya Ac. Nauk SSSR.Metally, n.1, 50-55 (1986).

60. M. Zinigrad, A. Phephelov, L. Barmin, M. Shalimov. Kinetics of the interaction of a boron-containing metal melt with an oxide electrolyte. Electrohimiya, v.22, issue, n.1, 74-78 (1986).

61. M. Zinigrad, A. Timoshin. Equipment for investigation of kinetics of electrochemical processes on the basis of computer. Structure and property of the metal and slag melts, Sverdlovsk, (1986).

62. M. Zinigrad. Modeling of metal melt-oxide melt interaction on the basis of physical chemistry. Structure and property of the metal and slag melts, Sverdlovsk, (1986).

63. M. Zinigrad, A. Balin, L. Barmin, B. Silberglait. Alloying of weld metal by reduction of elements from flux oxides. Theory and practices of welding, n.5, 24 (1986).

64. M. Zinigrad, M. Shalimov, A. Phljagin. Dephosforisation of metal during submerged arc welding. Theory and practices of welding, n.5, 24 (1986).

65. Zinigrad, A. Okolzdajev, A. Phljagin. Influence of phase composition and temperature on the equilibrium distribution of tungsten between metal and slag melts. Rasplavy, v.1, issue 5, 7-11 (1987).

66. A. Timoshin, M. Zinigrad. Development and application of low fluoride neutral flux for electroslag remelting of nickel-base alloys. Problemy spetsialnoy electrometallurgiyi, n.4, 21-25 (1987).

67. M. Zinigrad, A. Phephelov, M. Shalimov, A. Balin. Modeling of building-up processes. Theory and practices of welding, n.5, 20 (1987).

68. N. Razikov, M. Zinigrad, V. Shumjakov. Interaction of oxides of alkali metals with iron in flux-cored wire arc welding. Avtomaticheskaya svarka, n.3, 34-36 (1988).

9

69. M. Zinigrad, A. Balin, L. Barmin. Hardsurfacing of 170 8CP steel with chromium and boron recovery from slag. Avtomaticheskaya svarka, n.5, 52-55 (1988).

70. M. Zinigrad. Welder Qualification and Certification. Avtomaticheskaya svarka, n.4, 72 (1988).

71. M. Zinigrad, A. Okolzdajev, A. Phljagin. Limiting stage of tungsten anodic oxidation on boundary of metal and oxide melts. Rasplavy, v.2, issue 3, 46-51 (1988).

72. M. Zinigrad, A. Okolzdajev, A. Phljagin. Quick stage of tungsten oxidation on boundary of metal and oxide melts.Rasplavy, v.2, issue 4, 20-25 (1988).

73. M. Zinigrad. Modeling of metal and slag melt interaction. Bases of the physical-chemical and technological data, Dnepropetrovsk, 182 (1988).

74. M. Zinigrad. Development and production of ceramic flux. Advances and prospects of welding production, Moscow, 132 (1988).

75. A. Phljagin, A. Okolzdajev, M. Zinigrad. Application of oxide tungsten compounds for alloying of metal in submerged-arc built welding. Svarochnoye proizvodstvo 10, 41-43 (1988).

76. M. Zinigrad, A. Phljagin. Modeling of metal alloying during submerged arc welding. Information of center of CMEA, n.1, 53 (1989).

77. M. Jadkevich, S. Zimin, B. Statnikov, M. Zinigrad. Influence of technological parameters of electron beam spraying on content of heat resistant coating. Physical-chemical mechanic of materials, n.4, 56 (1989).

78. M. Jadkevich, S. Zimin, B. Statnikov, M. Zinigrad. Efficiency of electron beam heating. Physics and chemistry of materials treatment, n.6, 46 (1989).

79. M. Zinigrad, A. Phljagin, A. Okolzdajev, M. Shalimov. Improvement of technology of the processing of waste involving tungsten in the arc steel-making furnace. Bases of the physical-chemical and technological data, Kurgan, 190 (1990).

80. M. Zinigrad. Modeling of composition and properties of materials. Bases of the physical-chemical and technological data, Kurgan, 112 (1990).

81. M. Zinigrad, A. Phljagin, A. Okolzdajev, M. Shalimov. Improvement of technology of remelting of waste involving tungsten by application of modeling. Izvestiya vuzov. Chernaya metallurgiya, n.12, 59 (1991).

82. Zinigrad M., Mazurovsky V., Aksyutin O. Creating new welding materials on the basis of metallurgical processes modeling. Computer Technology in Welding, AWS, N7, USA, 1997.

83. Zinigrad M., Zalomov N, Mazurovsky V., Aksyutin O. Computer Approach to the Development of Welding Materials. Computer Technology in Welding, TWI, N8, UK, 1998.

84. Zinigrad M., Zinigrad A. The Mathematical Model of Welding Process Optimization. Chemistry (Israel), v. 45, 1999, pp.93-98.

85. M. Zinigrad, V.Mazurovsky. Computer modeling of the Metallurgical Processes in Welding Technologies. Computer Technology in Welding, AWS, N9, USA, 1999.

86. Zinigrad M., Mazurovsky V., Shumyakov V., Zinigrad A., Optimization of the Composition of a flux-cored wire for welding galvanized steel based on computer simulation of the welding process. Computer Technology in Welding, TWI, N10, Denmark, 2000.

10

87. Mazurovsky V., Zinigrad M., Zinigrad A. Novel computer-aided method of welding materials design. Computer Technology in Welding, AWS, N11, USA, 2001.

88. M. Zinigrad and V. Mazurovsky. Development of new welding materials on the base of mathematical modeling of metallurgical processes. Part 2. Development of Solution Algorithm and Software. In the book “Bi-National Russia-Israel Workshop”, Ekaterinburg, Russia, 2002, pp. 292-303.

89. V. Mazurovsky , M.Zinigrad , A. Zinigrad. Mathematical Model of Weld Microstructure Formation. Computer Technology in Welding and Manufacturing, TWI, N 12, Australia, 2002.

90. M. Zinigrad and V. Mazurovsky. Development of new welding materials on the base of mathematical modeling of metallurgical processes Part 1. Phase Interaction Analysis and Development of the Basic Model. In the book “Bi-National Russia-Israel Workshop”, Ekaterinburg, Russia, 2002, pp. 277-291.

91. M. Zinigrad, V. Mazurovsky and A. Zinigrad. Mathematical modeling of phase interaction taking place during fusion welding processes. Yazawa International Symposium, San Diego, USA, 2003.

92. V. Mazurovsky, M. Zinigrad, A. Zinigrad, L. Leontiev and V. Lisin. New approach to welding materials design. In the book “Bi-National Israeli - Russian Workshop”, Jerusalem, Israel, 2003, pp. 144-154.

93. V. Mazurovsky, M. Zinigrad, A. Zinigrad, L. Leontiev and V. Lisin. The phenomenological model of non-equilibrium crystallization and strengthening-phase-formation processes in the weld. In the book “Bi-National Israeli - Russian Workshop”, Jerusalem, Israel, 2003, pp. 155-167.

94. V. Mazurovsky, M. Zinigrad, L. Leontiev. Computer simulation of transformation in the metal melt of weld pool. Russia, Rasplavy, v. 3, 2003, pp. 85-94.

95. Mazurovskij, V.L.; Zinigrad, M.I.; Leont’ev, L.I.; Lisin V.L. The main principles of development of modern surfacing materials. Metal technology journal, Publising House "Nauka & Technology", Russia, No. 7, 2004, pp. 34-39.

96. V. Mazurovsky, M. Zinigrad, L. Leontev, and V. Lisin. Physicochemical analysis and modeling of the primary crystallization processes of a metal during welding. In the book “Bi-National Russia-Israel Workshop”, St.Petersburg, Russia, 2004.

97. V. Mazurovsky, M. Zinigrad, L. Leontev, and V. Lisin. Mathematical representation of a modified constitution Schaeffler diagram. Metals, Moscow, Russia, 2004, No.3, pp. 114-119.

98. V. Mazurovsky, M. Zinigrad, L. Leontiev, V. Lisin. Physicochemical Analysis and Simulation of Primary Crystallization of a Metal in the Course of Welding. Glass Physics and Chemistry Journal, Interperiodica, Russia, Vol 31, No. 1, 2005, pp. 67-73.

99. V. Mazurovsky, M. Zinigrad, L. Leontiev, V. Lisin. Physicochemical Analysis and the Phenomenological Model of Secondary Crystallization of a Metal in the Course of Welding. Glass Physics and Chemistry Journal, Interperiodica, Russia, Vol 31, No. 1, 2005, pp. 74-79.

100. V. Mazurovsky, M. Zinigrad, L. Leontiev, V. Lisin. Computer-aided design of advanced welding consumables. The Paton Welding Journal, Wheeltrans Ltd., Kiev, Ukraine, No. 3, 2005, pp. 2-6.

11

101. B.A. Gizhevskii, V.D. Zhuravlev, R.G. Zakharov, M.I. Zinigrad, E.A. Kozlov, L.I. Leontiev, S.V. Naumov, S.A. Petrova, V.P. Pilugin, A.Y. Fishman, N.M. Chebotaev. Obtaining of 3D Nanostructure Manganites LaMnO3+ by Quasistatic and dynamic Deformations. Doklady Akademii Nauk, 405, 4, 2005.

102. N.M.Chebotaev, A. Gedanken, B.A.Gizhevskii, A.V.Fetisov, A.Ya. Fishman, E.A.Kozlov, T.E.Kurennykh, L.I.Leontiev, S.V.Naumov, A.M.Patselov, S.A. Petrova, V.P.Pilugin, V.B.Vykhodets, R.G.Zakharov, M.I.Zinigrad. Effect of severe deformation on microstructure and stoichiometry of some oxides of transition metals. In the book “Fourth Bi-National Israeli - Russian Workshop”, Jerusalem, Israel, 2005, pp. 56-75.

103. V. Mazurovsky, M. Zinigrad, L. Leontiev. Experimental testing of a new approach to the development of welding materials. The phenomenological model of non-equilibrium crystallization and strengthening-phase-formation processes in the weld. In the book “Fourth Bi-National Israeli - Russian Workshop”, Jerusalem, Israel, 2005, pp. 177-191.

104. V. Mazurovsky, M. Zinigrad, L. Leontiev. Principles of modeling for computer-aided design of welding materials. In the book “Fourth Bi-National Israeli - Russian Workshop”, Jerusalem, Israel, 2005, pp. 192-206.

105. T.I.Arbuzova, N.M.Chebotaev, B.A.Gizhevskii, A.V.Fetisov, A.Ya. Fishman, E.A.Kozlov, T.E.Kyrennykh, L.I.Leontiev, V.L.Lisin, S.V.Naumov, S.A. Petrova, V.P.Pilugin, Yu.P.Sukhorukov, V.B.Vykhodets, R.G.Zakharov, M.I.Zinigrad. Structure and properties of compact nanocrystal oxides obtained by severe plastic deformation. In the book “Fifth Bi-National Israeli - Russian Workshop”, Novosibirsk, Russia, 2006, pp. 5-24.

106. M. Zinigrad. Kinetic model of high temperature physicochemical processes. In the book “Fifth Bi-National Israeli - Russian Workshop”, Novosibirsk, Russia, 2006, pp. 152-172.

107. M. Zinigrad. Computational metods for development of new welding materials. Computational Material Science, 37 (4) 2006, 417.

108. A.Ya. Fishman, M.A. Ivanov, N.K. Tkachev, K.Yu. Shunyaev, M.I. Zinigrad. Phase Transitions in Mixed Jahn–Teller Systems with Competitive Interactions. Defect and Diffusion Forum, Trans Tech Publications, Switzerland, Vols. 258-260, 2006, pp. 130-136.

109. M. Radune, D. Ophir, A. Lugovskoy, M. Zinigrad, D. Eliezer. A Sulfur Diffusion Investigation in Metal and Oxide Phases. Defect and Diffusion Forum, Trans Tech Publications, Switzerland, Vols. 258-260, 2006, pp. 433-440.

110. N. Zalomov, V. Boronenkov, M. Zinigrad, S. Shanchurov. On calculating the activity of components in binary silicate melts. Glass Physics and Chemistry Journal, Interperiodica, Russia, Vol. 33, 5, 2007, pp.455-458.

111. N. Zalomov, V. Boronenkov, M. Zinigrad, S. Shanchurov. Structure and Physicochemical Properties of the (AsSI)1–x(As2S3)x and (AsSeI)1–x(As2Se3)x Glasses. Glass Physics and Chemistry Journal, Interperiodica, Russia, 2007. Vol. 33,5, 2007, pp. 459-463.

112. S. Lugovskoy, M. Nisnevitch, M. Zinigrad and D. Wolf. Mechanochemical synthesis of salicylic acid–formaldehyde chelating co-polymer, Clean Technologies and Environmental Policy, Springer, Vol. 10, issue 3, 2008, pp. 279-285.

12

113. A. Lugovskoy, M. Zinigrad and D. Aurbach. Electrochemical Determination of Diffusion Coefficients of Iron (II) Ions in Chloride Melts at 700-750oC. Israel Journal of Chemistry. Vol. 47.3-4, 2007.

114. A. Kossenko, A. Lugovskoy, M. Zinigrad. A mathematical model of powder components oxidation during thermal spray process. Israel Journal of Chemistry. Vol. 47.3-4, 2007.

115. M. Radune, A. Radune, F. Assous,  M. Zinigrad, D. Eliezer. Investigation of Sulfur Transition through Metal-Slag Phase Boundary in Natural Moving Conditions. Defect and Diffusion Forum, Trans Tech Publications, Switzerland, Vols. 273-276, 2008, pp 752-756.

116. A. Lugovskoy, M. Zinigrad, D. Aurbach and A. Fishman. Study of electrochemical deposition of iron (II) ions on a solid tungsten electrode in chloride melts at 700-750°C. In the book “Sixth Bi-National Israeli - Russian Workshop”, Jerusalem, Israel, 2007, pp.77-84.

117. T.I. Arbuzova, B.A. Gizhevskii, A.V. Fetisov, T.I. Filinkova, A.Ya. Fishman, E.A.Kozlov, I.B. Krynetsky, T.E.Kyrennykh,  L.I. Leontiev, S.V. Naumov, S.A. Petrova,V.B.Vykhodets, R.G. Zakharov, M.I. Zinigrad. Effect of severedeformations on microstructure and properties of some oxides of transition metal. In the book “Sixth Bi-National Israeli - Russian Workshop”, Jerusalem, Israel, 2007, pp.256-273.

118. M. Zinigrad. Analysis of a Scientific Direction with Historical and Technological Preconditions. Collection of Academic Publications.USTU Ekaterinburg, Russia, 2007, pp.73-80.

119. V. Mazurovsky, M. Zinigrad and L. Leontiev. Design of Modern Welding Materials on the base of Computer Modelling. Collection of Academic Publications.USTU Ekaterinburg, Russia, 2007, pp. 102-115.

120. A. Kossenko, Y. Kuznetsov, M. Zinigrad. Combined technology of repairing and hardering of machine parts. In the book “Seventh Bi-National Israeli - Russian Workshop”, Perm, Russia, 2008, pp.78-90.

121. M. Radune , A. Radune, F. Assous, M. Zinigrad, D. Eliezer. Investigation of Sulfur Transition through Metal-Slag Phase Boundary in Natural Moving Conditions. Defect and Diffusion Forum, Trans Tech Publications, Switzerland Volumes 273 - 276, 2008, pp. 752-756.

122. K. Borodianskiy, V. Mazurovsky, A. Gedanken, M. Zinigrad. Developing a required structure of metals using computational methods, Material Science A vol. 497, issues 1-2, 2008. pp. 322-325.

123. S. Lugovskoy, M. Nisnevitch, A. Lugovskoy, M. Zinigrad. Mechanochemical synthesis of dispersed layer composites on the basis of talc and a series of biological active species in the following paginated issue of Clean Technologies and Environmental Policy, 2009, Volume 11, Issue 3, p. 277-282

124. M.Radune, A. Radune, F. Assous, M. Zinigrad. Modelling and Computer Simulation of Reagents Diffusion in High Temperature Diffusion Controlled Heterogeneous Reactions. Int. J. Comput. Mater. Sc.& Surf. Eng., 2009, Vol 1(4), pp.225-231.

125. A. Lugovskoy, M. Zinigrad, D. Aurbach and Z. Unger. Electrodeposition of iron(II) on platinum in chloride melts at 700–750 °C, Electrochimica Acta, Volume 54, Issue 6, 2009, pp. 1904-1908.

13

126. A. Lugovskoy, M. Zinigrad, D. Aurbach and Z. Unger. Electrodeposition of iron(II) on platinum in chloride melts at 700–750 °C, Electrochimica Acta, Volume 54, Issue 6, 2009, pp. 1904-1908.

127. Lugovskoy S, Lugovskoy A, Zinigrad M. Mechanochemical activation of dispersed layer composites on the basis of talc and a series of biological active species. In the book “Bi-National Israel-Russia Workshop”, Jerusalem, Israel, 2009, pp.74-76.

128. Selivorstov V., Dotsenko Y., Borodianskiy K., Kossenko A., Zinigrad M.Al-Si alloys structure formation using gaso-dynamic modification. In the book “Bi-National Israel-Russia Workshop”, Jerusalem, Israel, 2009, pp.143-149.

129. M. Radune , A. Radune, F. Assous, M. Zinigrad. Investigation of a Mathematical Model of High-Temperature Diffusion Controlled Heterogeneous Reaction between Metal and Oxide Melts. Defect and Diffusion Forum, Trans Tech Publications, Switzerland, Volumes 297 – 301, 2010, pp. 1475-1480.

130. A. Lugovskoy , Z. Unger, M. Zinigrad, D. Aurbach. Anomalous Diffusion Coefficients for W(IV) Ion Diffusion in NaCl-KCl Melt at 700-750°C. Defect and Diffusion Forum, Trans Tech Publications, Switzerland, Volumes 297 – 301, 2010, pp. 1481-1486.

131. V. Antsiferov, N. Astashina, G. Votinov, A. Lugovskoy, A. Rogozhniokov, S. Kazakov, E. Olshanski, The possibilities of use of magnete fixators in orthopaedical treatment of jaw defects, Permskij meditsinskij Zhurnal, 4, 2010, pp. 36-40 (In Russian).

132. I. Rusonik, Haim Cohen, Alex Lugowskoy, Alexander Krasnopolski, Michael Zinigrad, Dan Meyerstein, The Effect of an Electrical Bias on the Mechanism of Decomposition of Transients with Metal-Carbon σ Bonds, Eur. J. Inorg. Chem. 2010, pp. 3252-3255 (DOI: 10.1002/ejic.201000398).

133. E. Bormashenko, A. Musin, R. Pogreb, E. Luz, M. Zinigrad. Thickness of gravity-flattened water layers (“puddles”) deposited on the polymer substrates and the hysteresis of the contact angle. Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 372, Issues 1–3, 2010, pp. 135-138.

134. A. Lugovskoy, Z. Unger, M. Zinigrad, D. Aurbach. Zinc Ion Reduction on Solid Metal Electrodes in Chloride Melts" in “The Optimization of the Composition, Structure and Properties of Metals, Oxides, Composites, Nano- and Amorphous Materials”, 2010. pp. 104-117, Belokhurikha.

135. V. Selivorstov, Y. Dotsenko, K. Borodianskiy, M. Zinigrad, Control of Non-equilibrium crystallization of aluminum, Proceedings of the 6-th International conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2010), Ariel, Israel, issue 1, 2010, pp. 155-62.

136. M. Radune, M. Zinigrad, D. Mogilyanski, D. Fuks, N. Frage. Preparation of (Ti, Al)N solid solution by mechanical alloying. “Bi-National Israel-Russia Workshop”, Jerusalem, Israel, 2011, pp.279-286.

137. Y. Dotsenko, V. Selivorstov, K. Borodianskiy, A. Kossenko, M. Zinigrad. Structure formation control using gas-dynamic effect and modification to improve properties of Al-Si casting alloys. Bi-National Israel-Russia Workshop”, Jerusalem, Israel, 2011, pp.163-167.

138. K. Borodianskiy, M. Zinigrad, A. Gedanken, Aluminium A356 Reinforcement by Carbide Nanoparticles, J. Nano Research Vol.13(2011) 41-46.

14

139. Y. Dotsenko, V. Selivorstov, K. Borodianskiy, M. Zinigrad, Pecularities in using Hereditary Properties of Metallic Stock with High Iron Content to Obtain High Quality Al-Si Casting Alloy , Material Technologies and Modeling, 2012, Israel, pp. 256-260.

140. B. Kazanski, A. Kossenko, A. Lugovskoy and M. Zinigrad. The Influence of Fluoride Additives on the Properties of Oxide Layer Produced by Plasma Electrolytic Oxidation. The Optimization of the Composition, Structure and Properties of Metals, Oxides, Composites, Nano- and Amorphous Materials”, pp. 57-67, Chernogolovka, 2012.

141. B. Kazanski, A. Kossenko, A. Lugovskoy and M. Zinigrad. Fluoride Influence on the Properties of Oxide Layer Produced by Plasma Electrolytic Oxidation. Defect and Diffusion Forum, 326-328, 2012, pp. 498-503. doi:10.4028/www.scientific.net/DDF.326-328.498.

142. B. Kazanski, A. Kossenko, A. Lugovskoy and M. Zinigrad. Production of Ceramic Layers on Aluminum Alloys by Plasma Electrolytic Oxidation in Alkaline Silicate Electrolytes. Proceedings of TMS2012, 2012, Orlando, USA.

143. Bormashenko E., Musin Al., Zinigrad M. Evaporation of droplets on strongly and weakly pinning surfaces and dynamics of the triple line, Colloids and Surfaces A 385 (2011) 235– 240.

144. Bormashenko, E., Musin, A., Whyman, G., Zinigrad M. Wetting transitions and depinning of the triple line, Langmuir 28 (2012) 3460−3464.

145. L.E. Bodrova, E.A. Pastukhov, L.I. Leontev, M.I. Zinigrad, A.J. Fishman, E.Yu Goyda, R.G. Zaharov, S.A. Petrova, O.M. Fedorova, V.P. Chentsov. Low- Frequency Oscillation affect to tungsten and vanadium and copper melts. The Optimization of the Composition, Structure and Properties of Metals, Oxides, Composites, Nano- and Amorphous Materials”, pp. 15-20, .2012

146. A. Musin, E. Bormashenko, G. Whyman, Z. Barkay, M. Zinigrad. Revisiting the fine structure of the triple line, excepted 2013.

147. Y. Dotsenko, V. Selivorstov, K. Borodianskiy, M. ZinigradUsing a Promising Combined Technology to Improve the Mechanical Properties of Cast Articles Made From Alloys of The Al–Si System. Bi-National Israel-Russia Workshop”, Jerusalem, Israel, 2013, pp.104-107.

148. Kossenko, S. Lugovskoy, N. Astashina, A. Rogozhnikov, B. Kazanski, M. Zinigrad. Effect of pH on the formation of hydroxyapatite in PEO process with hydrothermal treatment of the Ti alloy. Bi-National Israel-Russia Workshop”, Jerusalem, Israel, 2013, pp.176-183.

149. A. Lugovskoy, M. Zinigrad, A. Kossenko, B. Kazanski. Production of Ceramic Layers on Aluminum Alloys by Plasma Electrolytic Oxidation in Alkaline Silicate Electrolytes. Applied Surface Science, 2013, 264 pp. 743–747.

150. B. Kazanski, A. Kossenko, M. Zinigrad, A. Lugovskoy. Fluoride Ions as Modifiers of the Oxide Layer Produced by Plasma Electrolytic Oxidation on AZ91D Magnesium Alloy. Applied Surface Science ,2013, 287 pp. 461-466

151. K. Borodianskiy, A. Kossenko, M. Zinigrad. Improvement of the Mechanical Properties of Al-Si Alloys by TiC Nanoparticles. Metallurgical and MaterialsTransactions, Volume 44A, No 11, 2013.

152. E. Bormashenko, A. Musin, G. Whyman, Z. Barkay, M. Zinigrad. Revisiting the fine structure of the triple line. Langmuir, pp. 14163-14167,) 2013).

15

153. A. Kossenko, S. Lugovskoy, N. Astashina, A. Lugovskoy, and M. Zinigrad. Effect of Time on the Formation of Hydroxyapatite in PEO Processwith Hydrothermal Treatment of the Ti–6Al–4V Alloy1. Glass Physics and Chemistry. Vol. 39, No. 6, pp. 639–642, 2013.

154. M. Radune, A. Radune, S. Lugovskoy, M. Zinigrad, D. Fuks, N. Frage. Mathematical Modeling of High Energy Ball Milling (HEBM) Process. Defect and Diffusion Forum Vol. 353 (2014).

155. M. Radune, M. Zinigrad, N. Frumin, S. Hayun and N. Frage. Thermal stability of supersaturated (Ti, Al)N solid solution. Proceedings of the 8-th International conference on Material Technologies and Modeling (MMT-2014), 2014, Ariel, Israel, vol.1 , p.102-111.

156. Yu. Kuznetsov, A. Kossenko, M. Zinigrad. Investigation of coating thickness obtained by plasma electrolytic oxidation on aluminium alloys in electrolytes of type “КОН-Н3ВО3”. Proceedings of the 8-th International conference on Material Technologies and Modeling (MMT-2014), 2014, Ariel, Israel, pp. vol.1, p.80-85.

157. A. Kossenko, A. Lugovskoy, M. Zinigrad. The surface modification of creep-resistant magnesium alloys by PEO. “Bi-National Israel-Russia Workshop”, Ekaterinburg, Russia. 2014. pp.94-103.

158. B. Kazanski, A. Lugovskoy, O. Gaon, M. Zinigrad. Comparison of electrochemical and chemical corrosion behavior of MRI 230D magnesium alloy with and without Plasma Electrolytic Oxidation treatment. Defect and Diffusion Forum, 2014. Accepted.

159. E. Bormashenko, A. Musin, G. Whyman, Z. Barkay, M. Zinigrad. On universality of scaling law describing roughness of triple line. The European Physical Journal E. 2015, p. 1-9.

160. S. Yado and M. Zinigrad. Synthesis and Thermal Analysis of Nanocomposites Based on Intermetallic Compounds in the Ni–Al System and Al2O3. Glass Physics and Chemistry, 2015, Vol. 41, No. 2, pp. 194–205.

161. Kazanski, B. Lugovskoy, A. Gaon, O. Zinigrad, M. Comparison of electrochemical and chemical corrosion behavior of MRI 230D magnesium alloy with and without Plasma Electrolytic Oxidation treatment .Defect and Diffusion Forum Vol. 364. pp 27-34.2015

162. Borodianskiy, k. , Selivorstov, V. , Dotsenko, Y. and Zinigrad, M. Effect of Additions of Ceramic Nanoparticles and Gas-Dynamic Treatment on Al Casting Alloys. Metals. 2015. Vol 5, pp. 2277-2288.

163. M. Radune, M. Zinigrad and N. Frage. Optimization of High Energy Ball Milling Parameters for Synthesis of Ti1-xAlxN Powder. Journal of Nano Research. 2016. Vol. 38, pp 107-113.

164. K. Borodianskiy& M. Zinigrad. Modification Performance of WC Nanoparticles in Aluminum and an Al-Si Casting Alloy. Metallurgical and Materials Transactions B. Vol 47B, pp 1302-1308, 2016.

165. M. Radune, M. Zinigrad, S. Kalabukhov, M. Sokol, V. I. Chumanov,N. Frage. Spark Plasma Sintering of Ti₁₋ₓAlₓN Nano-powders Synthesized byHigh-Energy Ball Milling. Elsevier Editorial System(tm) for Ceramics. Pp.1-25. 2016.

16

CONFERENCE PROCEEDING

1. M. Zinigrad, L. Barmin, S. Popel, M. Lvov. Application of the corrosion diagram method for investigation of reaction kinetic on boundary of metal and slag melts. Proceedings of the International Symposium "New methods of investigation of metal reduction processes", Moscow, 149-162 (1972).

2. M. Zinigrad, A. Phljagin. Kinetics of redox reactions of metal and flux involving aluminum. Proceedings of the Urals Welding Conference, Sverdlovsk, 15 (1976).

3. A. Phljagin, M. Zinigrad. Calculation of metal composition after hardsurfasing under flux. Proceedings of the Conference, Perm (USSR), 130-137 (1989).

4. S. Panov, M. Shalimov, M. Zinigrad. Velocity of metal desulfuration in hardsurfasing and welding under flux. Proceedings of the Conference, Perm (USSR), 138-142 (1989).

5. M. Zinigrad, A. Phljagin, A. Okolzdajev. Thermodynamics and kinetics of tungsten transition through the boundary of Fe-C and slag melts. Proceedings of the First International Symposium on Theory of Metallurgical Processes, Moscow, 111-115 (1989).

6. M. Zinigrad, A. Phljagin, E. Melnikova. Model and program of metal composition calculation in hardsurfasing. Proceedings of the scientific seminar, Leningrad, 46-49 (1990).

7. M. Zinigrad, A. Okolzdajev, A. Phljagin. Influence of slag properties on tungsten transition velosity through the boundary of Fe-C and slag melts. Proceedings of the Seventh Conference on Physical Chemistry of Melts, Tsheljabinsk (USSR), 208-211 (1990).

8. M. Shalimov, M. Zinigrad. Kinetic peculiarities of ionic exchange on boundary of Fe-C and slag melts Proceedings of the Tenth Conference on Physical-Chemical Basises of Metallurgical Processes, Moscow (USSR),7-9 (1991).

9. M. Shalimov, M. Zinigrad. Mathematical Model of Remelting of Tungsten Proceedings of the Tenth Conference on Physical-Chemical Basises of Metallurgical Processes Moscow (USSR), 196-199 (1991).

10. M.Zinigrad, A.Okol'zdaev. Limiting stage of tungsten anodic oxidation on the boundary of molten metal and slag. Proceedings of the 4-th International Conference, Sendai (Japan),1992.

11. M.Zinigrad. Simulation of metal and slag melts interaction for optimization and development of technological processes. Proceedings of the 4-th International Conference, Sendai (Japan),1992.

12. M.Zinigrad. Development and production of the alloying welding materials. International Welding Conference (Israel), 1992.

13. M.Zinigrad, O.Gafri. Mathematical model of elements reduction from oxides during build-up processes. International Conference on Computer-assisted Materials Design and Process Simulation (COMMP' 93), Tokyo (Japan), 1993.

14. M.Zinigrad, V.Mazurovsky, O.Gafri. Development of the new welding materials made of waste products. Welding Conference (Israel), 1994.

15. M.Zinigrad, V.Mazurovsky. Modeling of metallurgical welding processes for the purpose of creating new welding materials. Proceedings of the International Conference "Modeling and Simulation in Metallurgical Engineering and Materials Science” (MSMM'96), Beijing (China), 1996.

17

16. Zinigrad M., Shalimov M. Application of simulation methods of the analysis of the kinetics of electrochemical processes in melts, Proceedings of The 4th International Colloquium on Process Simulation, Espoo (Finland), 1997.

17. Boronenkov V., Shalimov M., Zinigrad M. The mathematical model of chemical processes during the oxyflame melting of copper concentrates. Proceedings of the International Symposium, S-Petersburg (Russia), 1997.

18. Zinigrad M., Zalomov N. Modeling of metal - slag interaction kinetic influenced by polymer structure of oxide - salt melts. Proceedings of the 5th International Colloquium on Process Simulation, Espoo (Finland), 1998.

19. Zinigrad M., Mazurovsky V. Computer Modeling of Metallurgical Technologies. Proceedings of International Conference on Computer Technology in Welding. Michigan, USA, 1999.

20. Zinigrad M., Mazurovsky V., Feng Di, Ye Wujun, Zalomov N. Modeling of the Build up Process for Production of Ni-Al based High Temperature Wear Resistant Coatings. Proceedings of ASM Materials Solution`99: International Symposium on Steel for Fabricated Structures. Cincinnati, Ohio, USA, 1999.

21. Di F., Heli L., Wujun Y., Zinigrad M. Micro-Features of the CE Surface of an Ni3Al-Based Alloy. Proceedings of International ASTM Symposium on Hydraulic Failure Analysis: Fluids, Components, and System Effects, Reno, Nevada, USA, 1999.

22. N. Zalomow, M. Zinigrad, V. Boronenkov Thermodynamics of Silicate and Aluminate Oxide Melts Used in Welding and Metallurgical Processes.Proceedings of the International Conference on Joining of Advanced and Speciality Materials, Cincinnati, USA, ASM International, 1999, N 2, 187 – 193.

23. M. Zinigrad. Mathematical modeling of the kinetics of high-temperature processes in metal-slag system. Proceedings of the Sixth International Conference on Molten Slags, Fluxes and Salts, Stockholm, Sweden, June 2000.

24. V. Mazurovsky, A. Zinigrad, M. Zinigrad. Predicting weld structure using modified Schaeffler constitution diagram. Proceedings of the InternationalConference Mathematical Modeling and Simulation of Metal Technologies, Ariel, Israel, 2000, pp. 540-545.

25. V. Mazurovsky , M.Zinigrad , A. Zinigrad. Novel method of welding materials design. Proceedings of the International Conference Mathematical Modeling and Simulation of Metal Technologies, Ariel, Israel, 2000, pp. 201-206.

26. M. Zinigrad. Development of new welding materials and technologies based on computer simulation. Proceedings of the International Conference Mathematical Modeling and Simulation of Metal Technologies, Ariel, Israel, 2000, pp. 140-151.

27. V.I. Shumiakov, M.P. Shalimov, M.I. Zinigrad. Coated electrodes with advanced ecological properties. Proceedings of the conference Ural Welding, Russia, 2002.

28. M. Zinigrad, V. Mazurovsky and A. Zinigrad. The Development of Electrode Coating Compositions Basing on the Mathematical Modeling of Physicochemical Processes on Metal-Slag Boundary. Proceedings of the Mills Symposium, London, UK, 2002, pp 545 – 553.

29. V. Mazurovsky, M. Zinigrad. and A. Zinigrad. Mathematical representaiton of a modified Schaeffler diagram. Proceedings of the Second International Conference on Mathematical Modeling and Computer Simulation of Metal Technologies, Ariel, Israel, 2002, pp.3/129-139.

30.K. Shunyaev, V. Lisin and M. Zinigrad. Arbitrary stoichiometry associates and mixture thermodynamics in liquid alloys. Proceedings of the Second International

18

Conference on Mathematical Modeling and Computer Simulation of Metal Technologies, Ariel, Israel, 2002, pp.1/12-18.

31.V. Mazurovsky, M. Zinigrad. and A. Zinigrad. Development of a computer-aided method for designing welding materials. Proceedings of the Second International Conference on Mathematical Modeling and Computer Simulation of Metal Technologies, Ariel, Israel, 2002, pp.2/29-37.

32. M. Shalimov, M. Zinigrad and V. Lisin. Thermodynamic characteristics of reactions in metal–slag–gas systems. Proceedings of the Second International Conference on Mathematical Modeling and Computer Simulation of Metal Technologies, Ariel, Israel, 2002, pp.1/130-146.

33. B. Zilbergleyt, M. Zinigrad. Thermodynamic simulation of complex metallurgical and chemical systems with the method of chemical dynamics. Proceedings of the International symposium on Process Control and Optimization in Ferrous and non Ferrous Metallurgy, Chicago, USA, 2003, pp. 63-76.

34. V. Streltsov, M. Zinigrad, V. Mazurovsky. Initial stage of evolution of discontinuity flaw in multilinked heterogenic solid systems. The 11th Israel Materials Engineering Conference, Haifa, Israel, 2003.

35. V. Streltsov, M. Zinigrad, V. Mazurovsky. Phenomenology of defects inheritance in crystalline solids after welding. The 11th Israel Materials Engineering Conference, Haifa, Israel, 2003.

36. M. Zinigrad and V. Mazurovsky. Computer-aided design of welding materials. 14th International Conference Computer Technology in Welding and Manufacturing. Sheffield, UK, 2004.

37. V. Mazurovsky, M. Zinigrad, L. Leontev, and V. Lisin. Physicochemical analysis and phenomenological model of the secondary crystallization processes of a metal during welding. In the book “Bi-National Russia-Israel Workshop”, St.Petersburg, Russia, 2004.

38. V. Mazurovsky, M. Zinigrad, L. Leontiev, and V. Lisin. New approach to the design of advanced welding materials. Proceedings of the Third International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2004, pp.2/1-12.

39. V.L. Mazurovsky, M. Zinigrad, V.F. Mazurovsky, N. Litvak, and V. Shumyakov. Implementation of an approach for creating advanced welding materials. Proceedings of the Third International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2004, pp.2/12-24.

40. V. Mazurovsky, M. Zinigrad, L. Leontiev, and V. Lisin. Carbide formation during crystallization upon welding. Proceedings of the Third International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2004, pp.3/126-134.

41. Shunyaev K.Yu., Pechischeva N.V., Zinigrad M.I. Peritectic diagrams of associated solutions. Proceedings of the Third International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2004, pp.3/113-118.

42. V. Mazurovsky, M. Zinigrad, L. Leontev, and V. Lisin. Computer-aided design of modern welding materials Proceedings of the Second International Conference on Mathematical Modeling and Information Technologies in Welding and Related Processes, Katsiveli, Crimea, Ukraine, 2004.

19

43. M. Zinigrad, K. Borodianskiy, V. Mazurovsky. Computer modeling of high-temperature chemical processes. Proceedings of the 40th Annual Meeting (2004) of the Israel Institute of Chemical Engineers, Haifa, Israel, 2004, p. 2f- 15.

44. M. Zinigrad, V. Mazurovsky, K. Borodianskiy, A.Gedanken. Computer simulation of the primary crystallization processes of a metal during welding. Proceedings of the International conference on Welding and Joining 2005 & Frontiers of Materials Joining, Tel-Aviv, Israel, 2005.

45. V. Mazurovsky, M. Zinigrad, L. Leontiev, V. Lisin, K. Borodianskiy. Quantitative estimation of carbide-forming abilities of d-elements. Proceedings of the Jubilee Scientific Conference on Physical Chemistry and Technology in Metallurgy, Ekaterinburg, Russia, 2005, pp. 89-98.

46. M. Zinigrad, V. Mazurovsky, K. Borodianskiy. Physico-chemical and mathematical modeling of phase interaction taking place during fusion welding processes. Proceedings of the First International Conference on Diffusion in Solid and Liquids, Aveiro, Portugal, 2005, pp. 841-850.

47. V. Mazurovsky, M. Zinigrad, K. Borodianskiy. Welding materials design. Proceedings of the First International Electronic Scientific and Technical Conference Computer Technologies in Joining of Materials – 2005, Tula, Russia, pp. 225-231.

48. S.A. Petrova, V.P. Pilugin, A.Ia. Fishman, N.M. Chebotaev. The influence of plastic deformations on the structure of lanthanum manganite. The 5th national conference on the applications of X-ray, synchrothrone irradiation, neutrons and electrons for the study of nano-materials and nano-systems. RSNE Nano-2005, Moscow, Russia, p.97.

49. M. Zinigrad, V. Mazurovsky, K. Borodianskiy. Physico-chemical and mathematical modeling of phase interaction taking place during fusion welding processes. Materialwissenschaft und Werkstofftechnik, WILEY-VCH Verlag GmbH., Weinheim, Germany, 36 (10), 2005, pp. 455-626.

50. K. Borodianskiy, M. Zinigrad, V. Mazurovsky. Computer simulation of the carbide formation during primary crystallization processes of a metal. Proceedings of the International conference on Welding and Joining 2006 & Frontiers of Materials Joining, Tel-Aviv, Israel, 2006.

51. D. Ophir, M. Radune, A. Lugovskoy, M. Zinigrad, D. Eliezer. A Sulfur Diffusion Investigation in Metal and Oxide Phases. Proceedings of the Second International Conference on Diffusion in Solid and Liquids, Aveiro, Portugal, 2006.

52. A.Kossenko, Alex Lugovskoy, M. Zinigrad. A mathematical model of powder components oxidation during thermal spray process. Proceedings of the Fourth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2006, pp.3/65-69.

53. K. Borodianskiy, V. Mazurovsky, M. Zinigrad, A. Gedanken. Creation of shock-abrasion resistance build-up metal using physico-chemical model of high temperature processes. Proceedings of the Fourth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2006, pp.3/83-92.

54. S. Lugovskoy, M. Nisnevitch, A. Lugovskoy, M. Zinigrad, D. Wolf. Mechanochemical synthesis of salicylic acidformaldehyde co-polymer capable of binding heavy metal ions. Proceedings of the Fourth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2006, pp.4/158-166.

20

55. T.I. Arbuzova, A.N. Ermakov, B.A. Gizhevskii, V.B. Fetisov, T.I. Filenkova, A.Ya. Fishman, G.A. Kozhina, L.I. Leontiev, E.G. Miroshnikova, S.V. Naumov, S.A. Petrova, R.G. Zakharov, M.I. Zinigrad. Structural, electrochemical and magnetic properties of compact nanocrystal LaMnO3-d oxides produced mechanochemically. Proceedings of the Fourth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2006, pp.1/132-150.

56. A.Ya. Fishman, M.A. Ivanov, N.K. Tkachev, K.Yu. Shunyaev, M.I.Zinigrad. Competitive interactions and phase states of mixed Jahn–Teller systems. Proceedings of the Fourth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2006, pp.3/109-120.

57. K. Borodianskiy, A. Lugovskoy, V. Mazurovsky, M. Zinigrad, A. Gedanken. Modeling of the weld metal microstructure. Proceedings of the International Conference on Computer Technology in Welding and Manufacturing, Kiev, Ukraine, 2006, 147-150.

58. N. Zalomov, V. Boronenkov, M. Zinigrad, S. Shanchurov. To the calculation of activities of components in binary silicate melts. Proceedings of the Structural Chemistry of Partially Ordered Systems, Nanoparticles and Nanocomposites: Topical Meeting of the European Ceramic Society, Saint Petersburg, Russia, 2006.

59. B.A. Gizhevskii, V.P. Pilugin, E.A. Kozlov, R.G. Zakharov, V.L. Lisin, L.I. Leontiev, M.Zinigrad. Preparation of bulk oxide nanomaterials by methods of quasi-static and dynamic severe deformations. Proceedings of the Structural Chemistry of Partially Ordered Systems, Nanoparticles and Nanocomposites:Topical Meeting of the European Ceramic Society, Saint Petersburg, Russia, 2006.

60. M.I. Zinigrad, K.Yu. Shunyaev, and A. Lugovskoy. The Calculation of Thermodynamic Properties and Phase Diagrams of Binary Alloys on the Basis of Chrome. Proceedings of the Sohn International Symposium "Advanced processing of metals and materials", San Diego, USA, 2006, pp. 659-665.

61. T.I. Arbuzova, N.M. Chebotaev, B.A. Gizhevskii, A.V. Fetisov, E.A. Kozlov, T.E. Kyrennykh, L.I. Leontiev, S.V. Naumov, A.M. Patselov, V.P. Pilugin, Yu.P. Sukhorukov, V.B. Vykhodets, R.G. Zakharov, and M.I. Zinigrad. Synthesis of Compact Nanocrystal Oxides by Severe Plastic Deformations Methods (Keynote). Proceedings of the Sohn International Symposium "Advanced processing of metals and materials", San Diego, USA, 2006, pp. 157-169.

62. M. Radune, F. Assous, M. Zinigrad and D. Eliezer. The Development of a Mathematical Model of Sulfur Diffusion in the Steel and Slag Phases in its Transition from the Steel into the Slag. Proceedings of the Fifth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2008, pp.1/145-154.

63. K. Borodianskiy, A. Basov, A. Gedanken and M. Zinigrad. Mechanochemical synthesis of nano-sized Cu-Al2O3. Proceedings of the Fifth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2008, pp.2/141-144.

64. S. Lugovskoy, A. Lugovskoy, M. Zinigrad. Mechanochemical activation of dispersed layer composites on the basis of talc and a series of biological active species. Proceedings of the Fifth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2008, pp.2/145-151.

21

65. A. Fetisov, T. Filinkova, A. Fishman, T. Grigorieva, L. Leontiev, V. Lisin, N. Lyakhov, S. Petrova, R. Zakharov, M. Zinigrad. The structure of mechanoactivated manganese oxides. Proceedings of the Fifth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2008, pp.2/159-169.

66. M. Remennik, A. Kossenko, A. Lugovskoy, M. Zinigrad, A. Gedanken. Corrosion resistance of aluminum alloys treated by Micro Arc Oxidation in different electrolytes. Proceedings of the Fifth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2008, pp.4/59-62.

67. Y. Kuznetsov, A. Kossenko, M. Zinigrad. Modern two stage coating technology. Proceedings of the Fifth International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Ariel, Israel, 2008, pp.4/82-89.

68. K. Borodianskiy, M. Zinigrad, A. Gedanken, Aluminum Reinforcing By refractory materials nanoparticles, International conference in Processing and Manufacturing of Advanced Materials (Thermec' 2009), Germany, 2009.

69. K. Borodianskiy, M. Zinigrad, A. Gedanken. Aluminum alloys reinforcing using ceramic nanoparticles, The 14-th Israel Materials Engineering Conference (IMEC 14), 2009, Tel-Aviv, Israel

70. A. Kossenko, A. Lugovskoy, M. Zinigrad. Colloidal silicate system in PEO of aluminum alloys. The 14-th Israel Materials Engineering Conference (IMEC 14), 2009, Tel-Aviv, Israel.

71. V. Selivorstov, Y. Dotsenko, K. Borodianskiy, M. Zinigrad, Control of Non-equilibrium crystallization of aluminum, Proceedings of the 6-th International conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2010), Ariel, Israel, issue 1, 2010, pp. 155-62.

72. Y. Dotsenko, V. Selivorstov, K. Borodianskiy, M. Zinigrad, Peculiarities in using Hereditary Properties of Metallic Stock with High Iron Content to Obtain High Quality Al-Si Casting Alloy , Proceedings of the 7-th International conference on Material Technologies and Modeling (MMT-2012), 2012, Ariel, Israel, pp. 1-256-260.

73. B. Kazanski, A. Kossenko, A. Lugovskoy and M. Zinigrad. Production of Ceramic Layers on Aluminum Alloys by Plasma Electrolytic Oxidation in Alkaline Silicate Electrolytes. Proceedings of TMS2012, 2012, Orlando, USA.

22