PIPE SUPPORTS FROM BIRSTAVERKEN - Cobalch ApSSliding support SSG 7005 - Type 12 A - Dy 154 + Restraining clips SSG 7155 - Type A The drawing is not standard. Type 12 B Sliding support

Cobalch ApS ● Hejreskovvej 24B ● DK-3490 Kvistgård ● Denmark ● Tel.: +45 4582 0533 ● Fax.: +45 4582 0118Danske Bank: 4130 4130088031 ● IBAN - DKK: DK3130004130088031 - EUR: DK4730004130088228 ● Swift code: DABADKKKCVR nr. DK70614316 ● [email protected] ● www.cobalch.com

3.9.1.1

PIPE SUPPORTSFROM BIRSTAVERKEN


3.9.1.2

On the following pages we present our pipe supports manufactured in accordance with the SSG Standardwhich encompasses the full range of hangers, guides, supports and brackets for piping systems.All products except springs are delivered hot-galvanised as standard.The standard is intended for use with piping in accordance with the dimension range DN 10-600 as statedbelow.

Stainless steel pipes, max 200° C - Rigid thermo-plastic pipesUnalloyed steel pipes, max 200° C - Resin-plastic pipes

The standard has been developed by the Swedish Forest Industry's Technical Installation Group, SSG,which is a co-operative organisation for the Swedish forest industry, and in collaboration with certain majorpipe manufactured.

SSG 7149

Bmin = 2/3 H£ = 18 ± 0,25°

FsFs

Fs

FsFG

85

H

B

The drawings are not standardised.Only stated measurement, function andstrength information is standardised.

DN 40 50 80 100 125 150 200 250 300 350 400 500 600Min. Length (slidingshoe)

100 100 150 150 150 150 300 300 300 300 400 400 400

Permitted load kN(FG,FS)

2 2 4 4 7 7 10 15 20 25 35 40 40

Permitted side loadkN 1) 0,6 0,6 1,2 1,2 2,1 2,1 3 4,5 6 7,5 11 12 12

Rated load 1,5 x FS

1) Permitted side load at sliding shoe is -30% of permitted load.

For the rating test load is applied to the centre for the pipe. Application of the load and support shall not betorque rigid.Residual deformation is not permitted.For guides, the direction of force shall be at right angles to the guide surface (Fs) and for sliding supports ata diagonal.During load rating testing of sliding supports a restrainer clip shall be employed as the boundary on one side

Lower edgeof pipe


SSG 7025Type PE

SSG 7075

Dy

H

SSG 7050

3.9.1.3

PIPE SUPPORTS SSG STANDARD SSG 7005

Type 1Designation: Hanger SSG 7005

Type and variant - Dy - HExample.....: Hanger SSG 7005

Type 1 A - Dy 203 - H 900Dim. range 10-600

Type 2Designation: Hanger SSG 7005

Type and variant - Dy - H - L1 - L2Example.....: Hanger SSG 7005

Type 2 A - Dy 88,9 - H 900 - L1 1000 - L2 800Dim. range 40-600

Type 3Designation: Hanger SSG 7005 - Type and variant - Dy

- H + Stop lug SSG 7100 - Type - NumberExample.....: Hanger SSG 7005 - Type 3 A - Dy 203

- H 900 + Stop lug SSG 7100 - Type B - 4 pcs.Dim. range 40-600

Type 4Designation: Spring hanger SSG 7005 -

Type - Dy - H - Spring basket NoExample.....: Spring hanger SSG 7005 -

Type 4 - Dy 203 - H 900 - No 500Dim. range 25-600

Variant BVariant A

SSG 7025Typ PD

SSG 7025Typ PB

SSG 7075

Dy

H

Variant A Variant B

SSG 7025Typ PG

SSG 7025Typ PF

SSG 7076

SSG 7030

L2

L1

H

Coil spring are availableas follows:No. 1,5 for max. load 150 kpNo. 3 for max. load 300 kpNo. 5 for max. load 500 kpNo. 8 for max. load 800 kpNo. 14 for max. load 1400 kpNo. 20 for max. load 2000 kpNo. 30 for max. load 3000 kp

Variant A Variant B Variant C Variant D

SSG 7025Typ PB

SSG 7025Typ PD

SSG 7025Typ PD

SSG 7025Typ PB

SSG7125

SSG7130

SSG 7075

SSG 7125

Dy

H

SSG7100

Distance betweenhangers only SSG 7250


Variant B

3.9.1.4



Type and variant - Dy - H - Springbasket No

Example.....: Spring hanger SSG 7005 -Type 5 A - Dy 203 - H 900 - No 500Dim. range. 25-600


Type and variant - Dy - H - Spring basketNo - L1 - L2

Example.....: Spring hanger SSG 7005 - Type 6A- Dy 88,9 - H 900 - No 150 - L1 1000 -L2 800Dim. range 40-600


Type and variant - Dy - H - Spring basket No -L1 - L2

Example.....: Spring hanger SSG 7005 - Type 7 A- Dy 88,9 - H 900 - No 150 - L1 1000 - L2 800Dim. range 40-600

Variant BVariant A

SSG 7025Typ PC

SSG 7025Typ PA

SSG 7050

Dy

H

Dy

SSG 7075

SSG 7076

SSG7050

SSG 7025Typ PK

SSG7050

SSG7050

SSG 7025Typ PH

H

L2

L1

Variant A

Variant BVariant A Variant BVariant A


Type and variant - Dy - H - Spring basketNo - L1 - L2

Example.....: Spring hanger SSG 7005 -Type 8 A - Dy 88,9 - H 900 - No 150 -L1 1000 - L2 800Dim. range 40-600

SSG 7076

SSG 7025Typ PH

SSG7030

SSG 7025Typ PH

SSG 7025Typ PC

SSG 7025Typ PA

L1

L2L2

L1

H

H

SSG 7025Typ PB

SSG 7025Typ PD

SSG 7076

SSG 7030

SSG7050

SSG7050

SSG7055

SSG7050


3.9.1.5



Type and variant - Dy - H - Spring basket No+Stop lug SSG 7100 - Type - Number

Example.....: Spring hanger SSG 7005 - Type 9 A- Dy 203 - H 900 - No 300 + Stop lug SSG7100 - Type B - 2 pcs.Dim. range 40-600


Type and variant - Dy - H - Spring basket No+ Stop lug SSG 7100 - Type - Number

Example.....: Spring hanger SSG 7005 - Type 10- AA Dy 203 - H 900 - No 300 + Stop lugSSG 7100 - Type B - 2 pcs.For pipes DY > 43

Type 11The standard for sliding support Type 11 encompasses two types, 11 A and 11 B.Sliding support type 11 A is intended for non-insulated, protective insulated and insulated piping with max 80 mm thickinsulation.The standard for type 11 A states only principle requirements for design which allows for various slide supports design.See SSG 7149.Sliding support type 11 B is intended for insulated piping S< 200° C.

The drawing is not standard.

For pipes Dy < 610

Type 11 ASliding support for non-insulated, protective insulated and insulated pipes with max 80mm thick insulation.

Designation: Sliding support SSG 7005 - Type - Dy - MaterialExample.....: Sliding support SSG 7005 - Type 11 A - Dy 154

Information on material and surface threatment plus required height, length andpermitted load is provided in SSG 7149.

Variant AVariant B

SSG7050

Dy

H

Dy

SSG7125

SSG7050

SSG 7025Typ PESSG 7025

Typ PE

Distance between hangersonly SSG 7250

H

SSG7130

SSG7125

SSG7075

SSG7130

SSG7125

SSG7075

SSG7125

SSG7100

SSG7050

SSG7050

SSG 7025Typ PC

SSG7025Typ PA

SSG7025Typ PC

SSG 7025Typ PA

Variant BC Variant ACBA AA

Distance between hangersonly SSG 7250


3.9.1.6

PIPE SUPPORT SSG STANDARD SSG 7005

Type 11 BSliding support for pipes

Designation: Sliding support SSG 7005 - Type and (variant 1) - Dy - (L1 - £°)1)Example.....: Sliding support SSG 7005 - Type 11 BK - Dy 154

For pipes Dy ≤ 196

For pipes Dy > 196

To insulate the interior of the sliding support inserta covering aluminium plate between the angle barsand fill the space created with insulation.

Type 12The standard for sliding support Type 12 encompasses two types, 12 A and 12 B. Sliding support type 12 A is intende fornon-insulated, protective insulated and insulated piping with max 80 mm thick insulation. The standard for type 12 Astates only principle requirements for design which allows for various slide support designs. See SSG 7149.Slide support type 12 B is intended for insulated piping S< 200° C.

Type 12 ASliding support for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation.Designation: Sliding support SSG 7005 - Type - Dy - Material + Restraining clips SSG 7155 - Type AExample.....: Sliding support SSG 7005 - Type 12 A - Dy 154 + Restraining clips SSG 7155 - Type AThe drawing is not standard.

Type 12 BSliding support for insulated pipes.

Designation: Sliding support SSG 7005 - Type and (variant1) - Dy (L1 - £°)1) + Restraining clips SSG 7155 - TypeExample.....: Sliding support 7005 - Type 12 BK - Dy 154 + Restraining clips SSG 7155 - Type A

1) Is only indicated by deviation from standard.


SSG 7151Typ NK

SSG 7151Typ NL

SSG 7151Typ O

SSG 7076

45°

£°

45°

£°L1L1L1

Dy Dy

SSG 7076Variant K Variant L

Variant K Variant L

45° 45°

£° £°

L1L1L1

SSG 7151Typ NK

SSG 7151Typ NL

Dy Dy

SSG7151

Typ O

SSG7076SSG

7076

SSG7155

SSG7155


3.9.1.7


Type 13The standarden for guide Type 13 encompasses two types, 13 A and 13 B.Guide type 13 A is intended for non-insulated, proctive insulated and insulated piping max 80 mm thick insulation.The standard for type 13 A states only principle requirements for design which allows for various slide support designs.See SSG 7149.Guide type 13 B is intended for insulated piping S < 200° C.

Type 13 AGuide for non-insulated, protective insulated and insulated piping with med max 80 mm thick insulation.Designation: Guide SSG7005 - Type - Dy - MaterialExample.....: Guide SSG 7005 - Type 13 A - Dy 154The drawing is not standard.

For pipes Dy < 610

Information on material and surface treatment plus requiredheight, lenght and permitted load is provided in SSG 7149.

Type 13 BGuide for insulated pipes.

Designation: Guide SSG 7005 - Type - Dy - (L1 - £°)1)Example.....: Guide SSG 7005 - Type 13 B - Dy 154

For pipes Dy ≤ 196 For pipes Dy > 196

To insulate the interior of the sliding support insert acovering aluminium plate between the angle bars andfill the space created with insulation.

45°

£°

45°

£°L1

SSG 7151Typ NL

SSG 7151Typ NL

Dy

45°

£°L1

SSG 7151Typ O

SSG7151Typ O

Dy



3.9.1.8


Type 14The standard for guide Type 14 encompasses two types, 14 A and 14 B.Guide type 14 A is intended for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation.The standard for type 14 A states only principle requirements for design which allows for various slide support designs.See SSG 7149.Guide type 14 B is intended for insulated piping S < 200° C.

Type 14 AGuide for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation.Designation: Guide SSG7005 - Type - Dy - MaterialExample.....: Guide SSG 7005 - Type 14 A - Dy 154The drawing is not standard.

For pipes Dy < 610

Information on material and surface treatment plus requiredheight, length and permitted load is provided in SSG 7149.

Type 14 BGuide for isolated pipes.

Designation: Guide SSG 7005 - Type - Dy - (L1)1)Example.....: Guide SSG 7005 - Type 14 B - Dy 154


To insulate the interior of the sliding supportinsert a covering aluminium plate between theangle bars and fill the space created withinsulation.


45°45°

L1L1

Dy Dy

SSG 7151Typ NL

SSG 7151Typ NS SSG

7151Typ OS

SSG 7151Typ O

45°


3.9.1.9


Type 15The standard for guide Type 15 encompasses two types, 15 A and 15 B.Guide type 15 A is intended for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation.The standard for type 15 A states only principle requirements for design which allows for various slide support designs.See SSG 7149.Guide type 15 B is intended for insulated piping S < 200° C.

Type 15 AGuide non-insulated, protective insulated and insulated piping with max 80 mm thick insulation.Designation: Guide SSG7005 - Type - Dy - MaterialExample.....: Guide SSG 7005 - Type 15 A - Dy 154The drawing is not standard.

For pipes Dy < 610

Information on material and surface treatment plus requiredheight, lenght and permitted load is provided in SSG 7149.

45°

45°

45°

L1L1

Dy Dy

SSG 7151Typ NL

SSG 7151Typ NS

SSG 7151Typ OS

SSG7151

Typ OS


Type 15 BGuide for isolated pipes.

Designation: Guide SSG 7005 - Type - Dy - (L1)1)Example.....: Guide SSG 7005 - Type 15 B - Dy 154


The sliding support is by isolation furnished insidewith a covering aluminium plate between the angle bars.


3.9.1.10


Type 16Guide for isolated pipes.

Designation: Guide SSG 7005 - Type - Dy (L1 - £°)1) + Stop lug SSG 7100 - Type - NumberExample.....: Guide SSG 7005 - Type 16 B - Dy 154 + Stop lug SSG 7100 - Type B - 4 pieces


To insulate the interior of the sliding support insert a covering aluminium plate between the angle bars and fill the spacecreated with insulation.


Type 17Type 17 A Spring guide for non-insulated or protective isolated pipes.Type 17 B Spring guide for isolated pipes.

Designation: Spring guide SSG 7005 - Type - Dy - H - Spring basket No - (L1 - £°)1)Example.....: Spring guide SSG 7005 - Type 17 A - Dy 154 - H 900 - No 3

Typ 17 A Typ 17 BFor pipes Dy ≥ 75 For pipes Dy ≤ 196

A-A

45°

£°

SSG 7100

SSG 7160

GuideSSG 7005Typ 13 A

GuideSSG 7005Typ 13 B

45°

£°

Dy

L1

H



3.9.1.11


Type 18Type 18 A Spring guide for non-isolated or protective isolated pipes.Type 18 B Spring guide for isolated pipes.

Designation: Spring guide SSG 7005 - Type - Dy - H - Spring basket No - (L1 - £°)1)Example.....: Spring guide SSG 7005 - Type 18 A - Dy 154 - H 900 - No 3

Typ 18 A Typ 18 BFor pipes Dy ≥ 375 For pipes Dy ≤ 196

Type 27Type 27 A Spring guide for non-insulated, protectiveinsulated and insulated piping with max 80 mm thickinsulation.

Type 27 B Spring guide for isolated pipes < 200° C.Designation: Spring guide SSG 7005 - Type - Dy - H -

Spring basket No - (L1°)1) + Stop lug SSG 7100- Type - Number - Material in guide 1)

Example.....: Spring guide SSG 7005 - Type 27 A -Dy 203 - H 900 - No 3 + Stop lug SSG 7100 -Type B - 2 pieces - SS Steel 23 33

For pipes Dy > 43



45°

£°GuideSSG 7005Typ 13 A Guide

SSG 7005Typ 13 B

Variant A Variant B

Pipe supportSSG 7005 –Typ 5

Dy

L1

H

Dy

H

Typ 27 AGuide SSG 7005 - Typ 13 A

Typ 27 BGuide SSG 7005 - Typ 13 B

SSG7100

Pipe support SSG 7005 -Typ 9 B

L1


3.9.1.12


Type 28Type 28 AA and AC Spring guide for non-insulated,protective insulated and insulated piping with max80 mm thick insulation.Type 28 BA and BC Spring guide for insulated pipes

< 200° C.Designation: Spring guide SSG 7005 - Type and

variant - Dy - H - Spring basket No - (L1 - £°)1)+ Stop lug SSG 7100 - Type - Number -Material in guide2)

Example....: Spring guide SSG 7005 - Type 28 AA- Dy 203 - H 900 - No 3 + Stop lug SSG7100 - Type B - 2 pieces - SS Steel 23 33

For pipes Dy > 43

1) Is only indicated by Type 28 B and deviaton from standard2) Is only indicated for Type 28 A

Type 29Type 29 A Spring guide for non-insulated, protectiveinsulated and insulated piping with 80 mm thick insulation.

Type 29 B Spring guide for insulated pipes < 200° C.Designation: Spring guide SSG 7005 - Type - Dy

- H - Spring basket No - (L1 - £°)1)+ Stop lug 7100 - Type - Number -Material in guide2)

Example....: Spring guide SSG 7005 - Type 29 A- Dy 203 - H 900 - No 3 + Stop lug SSG7100 - Type B - 2 pieces - SS Steel 23 33

For pipes Dy > 43

Typ 28 BA och BCguide SSG 7005

Typ 13 B

Typ 28 AA och ACguide SSG 7005

Typ 13 A

Variant AVariant C

Pipe support SSG 7005 - Typ 10 BCPipe support

SSG 7005 - Typ 10 BA

Dy

L1

SSG7100

H

Pipe support SSG 7005 - Typ 9 B

1) Is only indicated by Type 28 B and deviaton from standard2) Is only indicated for Type 28 A

Typ 29 Bguide SSG 7005

Typ 15 B

Typ 29 Aguide SSG 7005

Typ 15 A

Dy

H

L1

SSG7100


3.9.1.13


Type 30Type 30 AA and AC Spring guide for non-insulated,protective insulated and insulated pipes with max80 mm thick insulation.Type 30 BA and BC Spring guide for insulated pipes

< 200° C.Designation: Spring guide SSG 7005 - Type - Dy

- H - Spring basket No - (L1) + Stop lugSSG 7100 - Type - Number - Materialin guide1)

Example....: Spring guide SSG 7005 - Type 30 BC- Dy 203 - H 900 - No 3 + Stop lug SSG7100 - Type B - 2 pieces - SS Steel 23 33

For pipes Dy > 43

Pipe support

SSG 7005 Typ 10 BAPipe support SSG 7005 Typ 10 BC

Typ 30 AA och ACguide SSG 7005

Typ 15 A

Typ 30 BA och BCguide SSG 7005

Typ 15 B

L1

Dy

Dy

Dy

H

H

HVariant A with base plate

The support is shown in detailSSG 7178

Type 31Designation: Support SSG 7005 - Type and variant - Dy - HExample.....: Support SSG 7005 - Type 31 A - Dy 153 - H 400

Dim. range 10 - 600

Type 32Designation: Support SSG 7005 - Type and variant

- Dy - HExample.....: Support SSG 7005 - Type 32 A - Dy 154

- H 500Variant A Support for stainless steel pipe elbow SSG 1362Variant B Support for steel pipe elbow SMS 2063Variant C Support for steel pipe elbow SMS 2064

For pipes Dy < 60,3

1) Is only indicated for Typ 30 BA

SSG7100

SSG7177

SSG 7076


3.9.1.14


Typ 33Designation: Flexible support SSG 7005 - Type and variant - Dy - H - TExample.....: Flexible support SSG 7005 - Type 33 B - Dy 154 - H 600 - T5Variant A is bolted to the foundation.Variant B is welded to the foundation after that the necessary part of any zinc coating has been ground off. Normally thesupport is delivered uncoated at the zone intended for erection welding.

Variant A with base plate.

For pipes Dy > 43

Type 36Type 36 A Fix supports for non-insulated orprotective pipes.Type 36 B Fix support for insulated pipes.Designation: Fix SSG 7005 - Type - DyExample.....: Fix SSG 7005 - Type 36 A

- Dy 154

The drawing is not standard.

For pipes Dy < 610

Information on material and surfacetreatment plus required height, lengthand permitted load is provided in SSG 7149.

Type 38Designation: Fix SSG 7005 - Type - Dk + Stop lug

SSG 7100 - Type - NumberExample.....: Fix SSG 7005 - Type 38 - Dk 170 +

Stop lug SSG 7100 - Type A - 4 piecesDim. range 10 - 600

Dy

Dy

SSG 7175

T H

SSG 7076

a 0,7 x T

45°

£°

SSG 7151Type NK

SSG 7151Type NL

Variant L SSG7076

L1

SSG 7080

SSG 7100

Dk 43-90 Dk 104-196 Dk 207-461 Dk 513-610


3.9.1.15

Technical modifications reserved

01

-00

-242


Non-insulated SSG 7149

Dk H B h C HB h C

14 70 60 63 70

18 72 60 63 72

22 74 60 63 74

31 77 60 63 77

33 100 80 84 100

35 101 80 84 101

39 103 80 84 103

43 105 80 84 105

45 106 80 84 106

49 108 80 84 108

52 110 80 85 110 130 100 104 130

56 112 80 85 112 132 100 104 132

61 114 80 85 114 134 100 104 134

64 116 80 85 116 136 100 104 136

71 119 80 85 119 139 100 104 139

77 122 80 85 122 142 100 104 142

84 126 80 85 126 146 100 104 146

90 129 80 85 129 149 100 104 149

104 137 120 85 137 178 120 126 178

110 140 120 85 140 181 120 126 181

115 143 120 85 143 183 120 126 183

120 145 120 85 145 186 120 126 186

133 151 120 85 151 192 120 126 192

141 155 120 85 155 197 120 126 197

157 163 120 85 163 224 140 146 224

162 166 120 85 166 227 140 146 227

170 170 120 85 170 231 140 146 231

196 183 120 85 183 244 140 146 244

207 190 220 85 190 261 210 158 261

222 196 220 85 196 266 210 155 266

247 209 220 85 209 279 220 156 279

257 213 220 85 213 283 230 155 283

276 223 220 85 223 290 230 152 290

308 239 220 85 239 304 250 150 304

327 248 220 85 248 314 250 164 314

359 265 220 85 265 354 310 180 354

378 275 220 85 275 364 310 175 364

410 290 260 85 290 384 310 179 384

419 295 260 85 295 388 310 179 388

431 301 260 85 301 394 310 179 394

461 315 260 85 314 410 310 180 410

513 342 260 85 342 427 380 171 427

562 366 280 85 366 455 380 174 455

610 380 280 85 380 474 420 169 474

715 443 400 85 443 526 420 169 526

810 492 400 85 492 574 420 169 574

Insulated SSG 7151

Dk

C

D

H

h

E

B

£45°

Documents

PIPE SUPPORTS FROM BIRSTAVERKEN - Cobalch ApSSliding support SSG 7005 - Type 12 A - Dy 154 + Restraining clips SSG 7155 - Type A The drawing is not standard. Type 12 B Sliding support