中国汽车技术研究中心 China Automotive Technology & Research Center

中国汽车技术研究中心China Automotive Technology & Research Center

Section OneSection One ：： Brief IntroductionBrief Introduction

第一部分概　况

May 25, 1985 ： Established in Tianjin ； 1985~1999: R&D Center directly under government ； 1999: Independent Science and Technology Enterprise ； From August 2003: Turned over to SASAC (State-owned Assets Supervision and Administration Commission of the State Council).

CATAC Development History


Total Assets: RMB 4.3 billion (USD 692 million) Fixed Assets: RMB 950 million ( USD 153 million) Net Assets: RMB 2.38 billion (USD 383 million)Land Area: 654,000 m2 (162 acres)

Tianjin Headquarter

Beijing Operation

Shanghai Operation

Ningbo Auto Component Testing Center

Hanyang Special-Purpose Vehicle Institute


Automotive technology mansion and affiliated facilitiesComprehensive engine test labComplete vehicle emission test labLight duty vehicle durability test labNVH labAuto part labEMC labVehicle safety labPilot workshopAlternative energy test labEnergy center and supporting facilities

CATARC new base will cover an area of about 300,000m2 with 300,000m2 construction area. The total investment is RMB 2 billion (USD 322 million).

Construction of CATARC New Base:


CATARC

Automotive Standardization Research Institute

Auto Testing Research Institute

Auto Industry Planning Design and Research Institute

Auto Technical Information Research Institute

Quality System Certification Center

C-NCAP Management Center

Beijing Operations (Beijing CATARC Technology Center)

Shanghai Operations (Shanghai CATARC Automotive

Technology & Research Center)

Hanyang Special Purpose Vehicle Institute

Automotive Engineering Research Institute

Automotive Data Center

Post-doctoral Research Center

China Automobile Forensic Authentication Institute （ Beijin

g ）Yancheng Proving Ground

Tianjin CATARC Auto High-tech Company

Tianhang Company

Tianjin CATARC Century Hotel

Property Management Department

China Vehicle Technical Service CenterTianjin Qingyuan Electric Vehicle Co. Ltd.

Tianjin Tianfeng Automotive Interior Trimming Co., Ltd.Tianjin SwARC Automotive Research Laboratory Co., Ltd.

Shanghai CENAT New Energy Limited


2984 Employees

Professor-level:42

engineers: 41

Management Team

Retired: 244

Upper level: 6

Basic level: 102

Middle level: 61

Bachelors: 520

Senior engineers: 271

Doctors: 68

Masters: 346

42 years old on average

Section TwoSection Two ：： Main BusinessMain Business

第二部分主要业务

Industry Work

I. Auto Standardization and Technical Regulations

National technical administration of auto standardization and regulations mainly has following functions:

Secretariat of National Technical Committee of Auto Standardization （ SAC/TC114 ） Secretariat of Automotive Branch of China Association for Standardization

Interface for ISO standards (ISO/ TC ISO/TC22,177, IEC/TC69, IEC/CISPR/D)

Secretariat of China WP29 Workgroup

Publication of auto industry standards and related information


Industry Work

Company uploads data and testing methods for

applying gazette

Data are received and

fully examined

Incomplete data

Examine the test

program and VIN

Testing organizations

download data and testing program

Company

Testing organizations conduct the testing and

upload testing reports

Produ

ct p

ublishin

g

Techn

ical verification

Company

Verify Sam

ple veh

icle

Report to MIIT

II. Administration of Automakers and Products GazetteEntrusted by Ministry of Industry and Information

Technology(MIIT), conduct following issues:

On-site technical audit Drafting technical documents and managing the expert database Verification of the conformity of new vehicle types with already approved types Examining WMI/VIN (World Manufacturer Identifier/Vehicle Identification Number) Receiving and examining company application materials for gazette


III. Project Management for National 863 Program “energy conservation and new energy vehicles

Organize the implementation of Research Management support to the standardized

project All-round service for subject unit Dynamic information analysis and decision

analysis Technical communication and public

platform Promotion and public relations

Responsibilities ：

Industry Work


Industry Work

IV. China Automobile Forensic Authentication Institute(Beijing) China Automobile Forensic Authentication Institute (CAFAI) is affiliated to CATARC.

Authorized by national judicial and administrative division, CAFAI is ranked the first automobile authentication third party in China. Adhering to the principle of “Abiding by the law, Guided by science, Being Objective and precise, Offering premium service” , CAFAI complies with the requirements from national judicial and administrative division to complete every authentication project independently and impartially, and keep serving the whole society and securing the interest of people.

Main authentication issues:

• Vehicle feature (performance, structure, configuration, etc.)

• Vehicle quality and accidents caused by bad quality

• Traffic accidents

• Powertrain and component parts


Industry Work

V. Investment Consultation and Evaluation

Responsible for investment consultation and evaluation entrusted by NDRC and MIIT,

and provide consultation and suggestions to the government on the investment projects.

Up to date, 36 consultation and evaluation assignments entrusted by NDRC and MIIT

have been accomplished, including 22 new complete vehicle projects, 9 engine projects, 2

key component projects and 3 projects for National Engineering Centre and Laboratory.

Evaluations on 43 investment projects from within the central government budget have

been accomplished.

　 Partnership with

　 FAW, Dongfeng Motor Corp., GAIG., SAIC, Chana Corp., Changfeng Motor

Corp., Jiangling Motors Corp., Chery Corp., etc..


Industry Work

VI. Administration of WMI/VIN

For domestic auto manufactures, receive the applications and register modification of WMI and VIN ；

For imported auto makers, register their WMI; Accept the applications for corporate title code of domestic automakers and

register relevant modification.


VII. Testing

Emission and energy saving Full-scale vehicle crash Simulated crash Auto part EMC Lighting and electrics Complete vehicle New energy vehicle Vehicle-type determination of

new vehicle product Physical and chemical

analysis of emission

Test

10 Areas of testing ：


Test

National Passenger Car Quality Supervision and Testing

Center

Imported and exported vehicle accreditation lab

Authority of environment-friendly products assessment

and emission testing

National testing authority of new auto product application

gazette

National testing organization of scientific and technical

achievement authentication

China Compulsory Certification (CCC) Testing Body

SAQSIQ

SAQSIQ

MEP

MIIT

MOST

CNCA


Test

Investment budget: RMB 20 million each year; Independent, non-commercial; Having finished the assessments on 184 vehicle-types and will assess about 30 vehicle-types

per year in future; The vehicle purchase and testing are independent from each other and we choose the well sold

vehicles having entered the market in the past 2 years.

Assessment results published through the following media: Over 30 TV stations including CCTV ， BTV, Guangdong TV, Tianjin TV etc. Over 150 print media including Xinhua News Agency, Science and Technology Daily,

China Youth Daily, China Automotive News etc. Over 30 famous websites including Sina, Sohu, PConline, Xinhuanet etc.


VIII. Yancheng Proving Ground

RMB 2 billion total investment per plan

60 km total test tracks

The proving ground has all kinds of tracks and facilities that can satisfy the needs of certification test and R&D test for auto products

► 7.8 km 4-lane high-speed circuit

► Dynamic platform with the diameter of 300m

► ABS roads with various attachment coefficients

► Performance road, dry and wet handling roads, noise test road, test hills used for high speed testing and all kinds of performance roads for regulation tests, comfort road, low attachment coefficient circuit, low attachment coefficient platform, off road track, general road track and simulated urban road.

检测试验

Strive to build the world class third party technology service platform oriented to the Chinese automotive industry


VIIII. Engineering Design and Management

Engineering design, construction management and supervision to more than 1000 complete vehicle and parts

manufactures including :

Beijing Benz (Daimler Chrysler), Hyundai Beijing, Toyota Tianjin, Chang’an Ford, Guangqi Honda, Hunan

Changfeng, etc.

Engineering management for companies, including:

Tianjin FAW Toyota, Tangshan Aixin, ASVICS Tianjin, Toyota- FAW Moulding, Toyotsu Tianjin, etc.

Engineering Design and Management

Class A design qualification for national machinery industry, constructional engineering,

engineering consultation and also Class A supervision qualification for building construction,

investment project assessment qualification entrusted by NDRC. Following are the work

accomplished in recent years:


X. Industry Planning and Policy Research

Formulation of auto industry planning

Policy on auto industry development

Policy on auto tariff and tax policy

Strategic research on auto part export

Industry competitiveness Research

Research on prewarning mechanism of auto industry

Information Service

Research on ELV system and technology of recycling

Research on self- innovation and intellectual property

China Auto Industry Development Annual Report

World Auto Industry Development Annual Report

China Motorcycle Industry Development Annual Report


XI. Periodicals and Internet

Databases and yearly statistics about the industry Compile and publish the yearbook of China Auto Industry,

World Auto, Motorcycle Technology, China Auto (English Version)

Maintaining the website: http://www.autoinfo.gov.cn More than 20 professional databases have been established

having attracted over 760 subscribed companies Undertake online application for Gazette of Automaker and

Products. Undertake online application for Vehicle Qualification

Certificate . Maintaining the website: http://www.chinaspv.org.cn

Information Service

Assist government to manage the information of auto industry:

http://www.autoinfo.gov.cn/

http://www.chinaspv.org.cn/


International Forum on China Auto Industry Development

This forum, featuring the largest scale and highest level involving most fields in auto industry, has become a platform between enterprises and government.

In 2012, the forum attracted participants including over 30 high level governmental officials, 70 experts, 300 CEOs and VPs among multinational corporations and over 200 famous media reporting the forum from home and abroad.

Information Service


XII. Quality System Certification

The only certification body accredited by CNAB with the qualification of:

　 ISO 9000 TS 16949 ISO 14000 OSHMS 18000

Already served more than 1,100 complete vehicle manufactures (FAW, Dongfeng, Toyota,

Citroen, Honda, Yuejin, Chongqing Chana, Jinan Heavy Duty Truck Company, Xiamen

Golden Dragon, etc.) and parts makers (Motorola, Panasonic Electronics, Delphi, etc.) and

designated by many complete vehicle manufactures as auditing and assessment

authority.

Quality System Certification


XIII. Automotive Engineering Research

Research on common fundamental technologies and key technologies of automotive

passive safety engineering

Research on automotive electronic technologies and research on the common

technologies of active safety

Research on the common key engineering technologies of vehicle NVH

Research on the common technologies of vehicle emission and energy saving

Research on the technologies of new power system

Database construction of automotive development

Establishment and application research on common technology platform

Automotive Engineering Research

Major fields of technology research and engineering:


XIV. Automotive Data Center

Administration, data organization and maintenance of information system related to Vehicle Manufacturer and Product Gazette, Certification of Vehicle, and VIN.

Administration and maintenance of CAMDS Construction and maintenance of large-scale shared fundamental databases of the automotive industry Information integration, analysis and publishing of automotive industry development Design and development of information system ELV research and related service Market prospects in short, medium and long term Survey on automotive product quality and consumer satisfaction

Automotive Data Center

Business Scope：


XV. Management and training

Registered internal auditor training body authorized by the government

Training and consultation focused on QS-9000 and ISO/TS 16949

Training on new automotive technologies, quality management and lean manufacturing, in cooperation with SAE, AIAG, Motorola, etc.

Management Technology


XVI. International Communication and Cooperation

SAE China Representative Office Joint-venture

International Communication and Cooperation

SwARC

Polk- CATARC

Shanghai CENAT New Energy Co., Ltd.

Emission control and after-treatment system for vehicle

Service on auto information consultation

Producing and selling the Li-ion battery and system for new energy vehicles

SAECATARC

SwRICATARC

POLKCATARC

ENAX, Inc.CATARC


Maintaining long-term cooperation with foreign institutions and auto companies:

Having signed cooperative agreement with Energy Foundation, GE,

Argonne National Laboratory, TTI, Toyota, Volkswagen, Korea

Auto Institution, Michelin, Bosch, etc.

Maintaining long-term cooperation with GM, Ford, RAB, TUV,

BMW, Mercedes-Benz, JASIC, JARI, Nissan, Honda, MIRA, etc.

International Communication and Cooperation


XVII. Commercialization of Science and Technology

Scientific and Technological Industrialization

Investment: RMB 38.87 million Land area: 26,700 m2

Annual production:500,000 sets

１ . Auto Catalyst Converter



Undertaking several major EV projects of the national 863 program and over 30 major scientific and technical projects, having received more than RMB 40 million research subsidy from government;

The independently developed pure EV of S- series and B-series and pure electric mini truck of T-series have entered European and American market;

Having passed the examination of new energy vehicle access and owning the qualification of “Special-purpose vehicle manufacturer” authorized by MIIT;

Owning the reputation of the biggest EV R&D and commercialization base in Asia.

2.R&D on EV


• Major Investors: CATARC and ENAX. Inc

• Gross investment: 1 Billion RMB

• Address registered: North part of Jiading Industry Area, Shanghai

• Total area:33,000 m2

• Devices and facilities: imported from Japan

• Know-how: from ENAX

• Technical route: Ternary composite material and flexible packing

• Capability: 2011---800,000 cells, 74,000 KW

2013---4 million cells, 370,000 KW


3. Shanghai CENAT New Energy Co., Ltd.



Dashboard frame

Investment: RMB 56.387 million

Land area: 26,700 m2


Auto seat

Investment: RMB 5 million


　

4. Interior furnishing



Oxygen sensor

　 Project of Tianjin Scientific Commission with pilot production line capable of producing 150,000

　 Customer: Maintenance market

CAN/LIN bus

　 Finish the research on lights, door, air condition system.

Traveling data recorder

　 Developed 3 products and realized batch production.

5. Auto Electronics

Thanks for your attention!

Documents

中国汽车技术研究中心 China Automotive Technology & Research Center