7/29/2019 5 - Enflo 0110
1/2
ENFLO 0110
WINDTEC
WINDTEC
The future is ours ENFLO 0110
www.koenigswegkommunikation.de
01/2011
OPERATING DATA
Rated capacity 1 kW
Maximum power output 1,5 kW
Rated wind speed 12,5 m/s
Cut-in wind speed 3 m/s
Cut-out wind speed none
ROTOR
Diameter 1,10 m
Swept area 0,95 m2
Number of blades 5
Rotation speed max. 1,000 rpm
Material PA / GRP
DIFFUSORExternal diameter 1,53 m
Depth (diffuser+Fowler flap) 0,69 m
Material GRP / aluminium
YAW CONTROL
Type self-aligning by means of diffuser / tail vane
Power transfer rotary transformer
GEAR MECHANISM
Type gearless
GENERATOR
Type permanent magnet synchronous generator
Voltage max. 400 VAC
Protection class IP 55
CONTROL SYSTEM
Control under normal conditions characteristic curve-controlled
power regulation up
to maximum output power
Control under storm conditions overspeed limitation by means of
mechanical pitch
control (blade angle adjustment)
Safety shutdown holding brake
INVERTER
Operating modes grid feed-in; optional stand-alone
operation,
battery
Output voltage 230 V / 110 V
Frequency 50 Hz / 60 Hz
EMC conformity EN 61000-6-X
Protection class IP 33
Power supply monitoring in accordance with VDE 126-1-1
Output controller optimum adaptation to generator
TOTAL WEIGHT
minus mast and inverter approx. 35 kg
datasheet
ENFLO0110
COMMERCIAL EXAMPLE:Feed-in to private power supply
PRIVATE HOUSE EXAMPLE:Water heating
BENEFITS
Low turbine price per kW
Considerably smaller turbine for the same ratedcapacity
Higher efficiency, i.e. better wind energy utilisation
Low noise emissions
No disco effect (stroboscopic reflection of sunlight)
No danger of falling ice
Can be installed in many urban localities
Low installation costs
No maintenance costs
Rotor and generator
Inverter
Distribution cabinet
Private power supply
Plug
LightElectrical appliances
Rotor and generator
Inverter
Cartridge heater
Hot water tank
WindTec Systems AG | Lwenstrasse 16 | 8280 Kreuzlingen |
Switzerland | [email protected] | www.enflo-windtec.ch
Your specialist dealer
